P.S. Free 2026 CWNP CWNA-109 dumps are available on Google Drive shared by PrepAwayTest: https://drive.google.com/open?id=12Ke0_0BgitOHZIo2NsZqbxXf9_kK_NZC
The CWNP Wireless Network Administrator (CWNA) (CWNA-109) study material of PrepAwayTest is available in three different and easy-to-access formats. The first one is printable and portable CWNP Wireless Network Administrator (CWNA) (CWNA-109) PDF format. With the PDF version, you can access the collection of actual CWNP Wireless Network Administrator (CWNA) (CWNA-109) questions with your smart devices like smartphones, tablets, and laptops.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> CWNA-109 Study Materials <<
Nobody wants to be stranded in the same position in his or her company. And nobody wants to be a normal person forever. Maybe you want to get the CWNA-109 certification, but daily work and long-time traffic make you busier to improve yourself. However, there is a piece of good news for you. Thanks to our CWNA-109 Training Materials, you can learn for your CWNA-109 certification anytime, everywhere. And you will be bound to pass the exam with our CWNA-109 exam questions.
NEW QUESTION # 34
To ease user complexity, your company has implemented a single SSID for all employees. However, the network administrator needs a way to control the network resources that can be accessed by each employee based in their department.
What WLAN feature would allow the network administrator to accomplish this task?
Answer: A
Explanation:
The WLAN feature that would allow the network administrator to control the network resources that can be accessed by each employee based on their department is Role-Based Access Control (RBAC). RBAC is a method of assigning different permissions and policies to users or groups based on their roles in the organization. RBAC can be implemented by using VLANs, ACLs, or firewalls to restrict access to certain network segments or resources. RBAC can also be integrated with 802.1X/EAP authentication to dynamically assign roles and VLANs to users based on their credentials. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 403; [Role-Based Access Control (RBAC) in Wireless Networks], page 1.
NEW QUESTION # 35
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?
Answer: B
Explanation:
In the 2.4 GHz frequency band used for 802.11 wireless networks, the channel bandwidth is typically 20 MHz, but the actual frequency spread of each channel is about 22 MHz due to the modulation techniques used. This spread causes overlap between adjacent channels, which can lead to interference and degrade network performance. To avoid this, it's essential to use non-overlapping channels.
The three non-overlapping channels in the 2.4 GHz band are 1, 6, and 11. Each of these channels is spaced sufficiently apart to avoid interference with each other:
* Channel 1: Centered at 2.412 GHz.
* Channel 6: Centered at 2.437 GHz.
* Channel 11: Centered at 2.462 GHz.
Given the options provided, option C (1 and 5) is the closest to a pair of non-overlapping channels, although in practice, channel 5 would still cause some interference with channel 1 due to the 22 MHz spread. The ideal choice for non-overlapping channels would be any two channels among 1, 6, and 11, but this is not an option provided. Therefore, within the given options, 1 and 5 are the best choice, understanding that in a real-world scenario, 1 and 6 or 6 and 11 would be preferred to avoid overlap.
References:
* CWNA Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109, by David D: Coleman and David A. Westcott.
* Understanding 2.4 GHz channel arrangement and interference patterns in 802.11 wireless networks.
NEW QUESTION # 36
The requirements for a WLAN you are installing state that it must support unidirectional delays of less than
150 ms and the signal strength at all receivers can be no lower than -67 dBm. What application is likely used that demands these requirements?
Answer: A
Explanation:
VoIP (Voice over Internet Protocol) is an application that is likely used that demands the requirements of unidirectional delays of less than 150 ms and the signal strength at all receivers can be no lower than -67 dBm. VoIP is an application that allows users to make and receive voice calls over a network, such as the Internet or a WLAN. VoIP is a real-time and interactive application that requires high quality of service (QoS) to ensure good user experience and satisfaction. One of the QoS metrics for VoIP is delay, which is the time it takes for a voice packet to travel from the sender to the receiver. Delay can affect the quality and intelligibility of the voice conversation, as well as the synchronization and naturalness of the dialogue. The ITU-T G.114 recommendation suggests that the maximum acceptable one-way delay for VoIP should be less than 150 ms, as anything higher than that can cause noticeable degradation and annoyance to the users.
Another QoS metric for VoIP is signal strength, which is the measure of how strong the RF signal is at the receiver. Signal strength can affect the reliability and performance of the wireless connection, as well as the data rate and throughput of the VoIP traffic. The CWNA Official Study Guide recommends that the minimum signal strength for VoIP should be -67 dBm, as anything lower than that can cause packet loss, retries, jitter, and other issues that can impair the voice quality. References: 1, Chapter 10, page 398; 2, Section 6.1
NEW QUESTION # 37
Which mechanism, defined as part of 802.11h, allows an AP to detect and avoid interference with radar systems by dynamically changing channels?
Answer: C
Explanation:
Dynamic Frequency Selection (DFS) is a mechanism required on certain 5 GHz channels that were originally allocated to radar systems, such as weather and military radar. DFS-capable APs continuously monitor the channel for radar signatures. If radar is detected, the AP must vacate the channel and select a different one to avoid interfering with the radar system. DFS, along with Transmit Power Control (TPC), was introduced through the 802.11h amendment to allow 802.11 devices to coexist with radar systems in the 5 GHz band.
NEW QUESTION # 38
What is the final step in an effective troubleshooting process?
Answer: A
Explanation:
The final step in an effective troubleshooting process is to document the results. Documentation is essential for keeping track of the problem history, the actions taken, the solutions implemented, and the outcomes achieved.
Documentation can also help to prevent future problems, improve best practices, and provide feedback for improvement. Documentation should include relevant information such as problem description, symptoms, root cause analysis, resolution steps, verification methods, and lessons learned. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 513; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 483.
NEW QUESTION # 39
......
There are a number of distinctions of our CWNA-109 Exam Questions that make it superior to those offered in the market. Firstly, you will find that there are three different vesions of our CWNA-109 learning guide: the PDF, Software and APP online. Though the content is the same, but the displays are all different. And you can study in all kind of conditions if you have three of them. Secondly, the prices of every version are favourable. And you can buy the Value Pack with discounted price.
New CWNA-109 Exam Pass4sure: https://www.prepawaytest.com/CWNP/CWNA-109-practice-exam-dumps.html
DOWNLOAD the newest PrepAwayTest CWNA-109 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=12Ke0_0BgitOHZIo2NsZqbxXf9_kK_NZC