P.S. Free 2026 Juniper JN0-683 dumps are available on Google Drive shared by DumpsQuestion: https://drive.google.com/open?id=1Xo_wq2aza_2U-tx2zS5UzCso5iXdJGWx
If you want to be familiar with the real test and grasp the rhythm in the real test, you can choose our JN0-683 exam test engine to practice. Both our soft test engine and app test engine provide the exam scene simulation functions. You set timed JN0-683 test and practice again and again. Besides, JN0-683 exam test engine cover most valid test questions so that it can guide you and help you have a proficient & valid preparation process.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> Valid JN0-683 Exam Camp Pdf <<
Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Juniper Certification JN0-683 Exam. DumpsQuestion are able to provide you with test exercises which are closely similar with real exam questions.
NEW QUESTION # 89
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?
Answer: A
Explanation:
In the CRB architecture, inter-VNI (Virtual Network Identifier) routing occurs on the spine switches, meaning the spine devices handle the Layer 3 routing. The leaf switches primarily provide Layer 2 bridging and VXLAN encapsulation/decapsulation, while routing between VXLAN segments is done centrally on the spines.
NEW QUESTION # 90
You are asked to build redundant gateways in your EVPN-VXLAN environment, but you must conserve address space because these gateways must span across seven PES. What should you implement on the PEs lo satisfy these requirements?
Answer: D
Explanation:
* Redundant Gateways in EVPN-VXLAN:
* In an EVPN-VXLAN environment, providing redundant gateway functionality typically involves the use of Anycast Gateway. This allows multiple PEs (Provider Edge devices) to use the same IP address and MAC address for the gateway, enabling seamless failover and redundancy without IP conflicts.
* Conserving Address Space:
* Using the same IP address across multiple PEs conserves address space because only one IP address is needed for the gateway function, regardless of the number of PEs. The shared MAC address ensures that ARP resolution and forwarding behavior are consistent across all the PEs.
Conclusion:
* Option C:Correct-Using IRB interfaces with the same IP and MAC address across all PEs satisfies the need for redundancy while conserving address space.
OptionsA, B,andDintroduce unnecessary complexity or do not fully utilize the efficient Anycast Gateway approach, which is best practice for conserving IP space and providing redundancy.
NEW QUESTION # 91
Which two requirements are needed to facilitate over-the-top DCI? (Choose two.)
Answer: A,C
Explanation:
All leaf VTEPs in each network must be reachable: In over-the-top Data Center Interconnect (DCI) using EVPN-VXLAN, the leaf VTEPs (VXLAN Tunnel Endpoints) in both data centers need to be reachable from each other. This is crucial for the successful exchange of VXLAN traffic and the proper operation of the overlay network between the data centers.
EVPN route-types must be advertised to all leaf devices: To extend Layer 2 and Layer 3 services seamlessly across data centers in OTT DCI, EVPN route types must be advertised to all leaf devices to maintain the unified control plane and support endpoint reachability.
NEW QUESTION # 92
Which two statements are true about EVPN routes for Data Center Interconnect? (Choose two.)
Answer: B,D
Explanation:
* Type 2 EVPN Routes:
* Type 2 routesadvertise MAC addresses within an EVPN instance and are used primarily for Layer 2 bridging. These routes do not require a VXLAN tunnel to the protocol next hop because they operate within the same Layer 2 domain.
* Type 5 EVPN Routes:
* Type 5 routesare used to advertise IP prefixes (Layer 3 routes) within EVPN. Similar to Type 2 routes, they do not require a VXLAN tunnel to the protocol next hop because they represent L3 routes, which are managed at the routing layer without the need for VXLAN encapsulation.
Conclusion:
* Option B:Correct-Type 2 routes do not need a VXLAN tunnel to the next hop, as they are used for Layer 2.
* Option D:Correct-Type 5 routes also do not need a VXLAN tunnel because they operate at Layer 3, handling IP prefixes.
NEW QUESTION # 93
Exhibit.
You have implemented an EVPN-VXLAN data center. Device served must be able to communicate with device server2.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,B
Explanation:
* Understanding the Exhibit Setup:
* The network diagram shows an EVPN-VXLAN setup, a common design for modern data centers enabling Layer 2 and Layer 3 services over an IP fabric.
* Leaf1 and Leaf2 are the leaf switches connected to Server1 and Server2, respectively, with each server in a different subnet (172.16.1.0/24 and 172.16.2.0/24).
* Spine1 and Spine2 are part of the IP fabric, interconnecting the leaf switches.
* EVPN-VXLAN Basics:
* EVPN (Ethernet VPN) provides Layer 2 and Layer 3 VPN services using MP-BGP.
* VXLAN (Virtual Extensible LAN) encapsulates Layer 2 frames into Layer 3 packets for transmission across an IP network.
* VTEP (VXLAN Tunnel Endpoint) interfaces on leaf devices handle VXLAN encapsulation and decapsulation.
* Integrated Routing and Bridging (IRB):
* IRB interfaces are required on leaf1 and leaf2 (where the endpoints are directly connected) to route between different subnets (in this case, between 172.16.1.0/24 and 172.16.2.0/24).
* The IRB interfaces provide the necessary L3 gateway functions for inter-subnet communication.
* Traffic Flow Analysis:
* Traffic from Server1 (172.16.1.1) destined for Server2 (172.16.2.1) must traverse from leaf1 to leaf2.
* The traffic will be VXLAN encapsulated on leaf1, sent over the IP fabric, and decapsulated on leaf2.
* Since the communication is between different subnets, the IRB interfaces on leaf1 and leaf2 are crucial for routing the traffic correctly.
* Correct Statements:
* C. An IRB Interface must be configured on leaf1 and leaf2:This is necessary to perform the inter-subnet routing for traffic between Server1 and Server2.
* D. Traffic from server1 to server2 will transit the VXLAN tunnel between leaf1 and leaf2:
This describes the correct VXLAN operation where the traffic is encapsulated by leaf1 and decapsulated by leaf2.
Data Center References:
* In EVPN-VXLAN architectures, the leaf switches often handle both Layer 2 switching and Layer 3 routing via IRB interfaces. This allows for efficient routing within the data center fabric without the need to involve the spine switches for every routing decision.
* The described traffic flow aligns with standard EVPN-VXLAN designs, where direct VXLAN tunnels between leaf switches enable seamless and scalable communication across a data center network.
NEW QUESTION # 94
......
We do not offer Data Center, Professional (JNCIP-DC) (JN0-683) PDF questions only. Customizable web-based and desktop Juniper JN0-683 practice exams are also available at DumpsQuestion. You can take our Data Center, Professional (JNCIP-DC) (JN0-683) practice tests multiple times. These JN0-683 tests keep a record of your every attempt so you can review and overcome mistakes.
JN0-683 PDF Questions: https://www.dumpsquestion.com/JN0-683-exam-dumps-collection.html
BONUS!!! Download part of DumpsQuestion JN0-683 dumps for free: https://drive.google.com/open?id=1Xo_wq2aza_2U-tx2zS5UzCso5iXdJGWx