P.S. Free & New 350-101 dumps are available on Google Drive shared by ITExamSimulator: https://drive.google.com/open?id=1zGKC3QWx3e-vZk-FszjJo-vAMyfBH-Hu
Nowadays, seldom do the exam banks have such an integrated system to provide you a simulation test. You will gradually be aware of the great importance of stimulating the actual exam after learning about our 350-101 Study Tool. Because of this function, you can easily grasp how the practice system operates and be able to get hold of the core knowledge about the Implementing and Operating Cisco Wireless Core Technologies exam. In addition, when you are in the real exam environment, you can learn to control your speed and quality in answering questions and form a good habit of doing exercise, so that youโre going to be fine in the Implementing and Operating Cisco Wireless Core Technologies exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Valid Cisco 350-101 Test Simulator <<
Our company is open-handed to offer benefits at intervals, with 350-101 learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our 350-101 practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the 350-101 exam.
NEW QUESTION # 44
Which wireless connection occurs when there are no physical obstacles between the receiver and transmitter?
Answer: D
Explanation:
The correct answer is line-of-sight. In RF terminology, line-of-sight describes a wireless path where the transmitting antenna and receiving antenna have an unobstructed visual or RF path between them. Cisco's RF power documentation defines this directly: antennas that can see each other without obstacles between them are considered to be in line of sight. This is especially important in outdoor, bridge, mesh, and point-to-point wireless designs, where buildings, terrain, foliage, or other obstructions can degrade or block the RF path.
The other options describe different RF behaviors. Attenuation is signal loss as RF energy travels through free space, cables, walls, or other materials. Reflection occurs when RF energy bounces off a surface such as metal, glass, or concrete, often contributing to multipath. Beamforming is an antenna/transmission technique that focuses RF energy toward a client or receiver to improve signal quality; it is not the condition of having no obstacles. Cisco mesh planning guidance also emphasizes verifying whether a wireless link has clear line of sight before deployment, reinforcing that LOS is a path condition, not a modulation or security feature.
NEW QUESTION # 45
Refer to the exhibit. An onsite engineer is working to connect devices to the wireless network in a corporate environment. The network requirements dictate that WPA2-Enterprise security must be used with certificate-based mutual authentication to align with enterprise policy, which requires client and server certificates for secure access. After the initial wireless settings are applied on a Windows-based workstation, the engineer must select the appropriate authentication method in the client network properties to complete a successful enterprise Wi-Fi connection. Which option in the "Choose a network authentication method" dropdown meets this requirement?
Answer: D
Explanation:
The correct authentication method is EAP-TLS. WPA2-Enterprise uses 802.1X/EAP authentication rather than a pre-shared key, and the supplicant, authenticator, and RADIUS authentication server participate in the enterprise authentication exchange. Cisco documentation states that in enterprise WPA/WPA2 operation, 802.1X/EAP is used for authentication and provides strong authentication between the client and authentication server.
The decisive requirement in the question is certificate-based mutual authentication requiring both client and server certificates. Cisco explicitly describes EAP-TLS as requiring both server-side and client-side certificates, while PEAP requires only a server-side certificate and normally authenticates the client with password-based credentials inside the protected tunnel. Cisco Secure ACS documentation also states that EAP-TLS uses the certificates of the authentication server and the end-user client, enforcing mutual authentication.
NEW QUESTION # 46
A business requires a Cisco 9163E AP to act as a point-to-point connection between two buildings on campus. No wired connection is available between the sites, and the AP must relay network traffic across the wireless link. The administrator must ensure that the AP is configured to forward Ethernet frames between its radio and Ethernet interfaces. Which CLI command must the administrator use to configure the AP for this application?
Answer: D
Explanation:
In point-to-point wireless deployments, the AP must act as a transparent bridge, forwarding Ethernet frames between the wired network interface and the wireless radio. The correct configuration command in Cisco IOS XE for a Cisco 9163E AP is ap name <ap_name> mode bridge. This sets the AP into bridge mode, allowing it to function as a Layer 2 relay between the two connected sites, effectively extending the Ethernet network over the wireless link.
NEW QUESTION # 47
What is the maximum transmit power level allowed for 2.4 GHz in the United States?
Answer: C
Explanation:
The correct answer is 30 dBm, which equals 1 watt of conducted transmit power. In the United States, the 2.4-GHz ISM band used by 802.11b/g/n/ax Wi-Fi falls under FCC Part 15.247. The FCC rule permits digital modulation systems in the 2400?483.5 MHz band and specifies that the maximum conducted output power is 1 Watt. Converting watts to dBm uses the formula dBm = 10 log10(mW): 1 watt equals 1000 mW, and 10 log10(1000) = 30 dBm.
This is also consistent with Cisco wireless configuration behavior, where Cisco controller Radio Resource Management transmit-power limits use dBm values and support a configurable transmit-power range up to 30 dBm. The key distinction is that 30 dBm is conducted transmit power, while 36 dBm commonly represents an EIRP value when antenna gain is included, such as 30 dBm transmitter output plus 6 dBi antenna gain. Cisco RF fundamentals emphasize that antenna gain affects coverage and radiated energy, so transmit power and EIRP must not be confused.
NEW QUESTION # 48
What is the main benefit of using AI Enhanced RRM on the Cisco Catalyst 9800 wireless controller?
Answer: A
Explanation:
AI Enhanced RRM is not a static-threshold tuning feature and it is not designed to simply raise AP transmit power. Cisco defines AI Enhanced RRM as a radio resource management technology that applies artificial intelligence and machine learning to optimize RF environments, uses distributed data collection from Cisco wireless controllers with cloud-based analytics, and automates adaptive RF parameter tuning for Cisco wireless networks.
The operational model is telemetry-driven. RF telemetry is collected from APs by the Catalyst 9800 WLC, sent through Cisco Catalyst Center to the Cisco AI Analytics Cloud, analyzed by RRM algorithms, and then configuration-change information is returned through Catalyst Center toward the managed wireless infrastructure. Cisco's AI-Enhanced RRM deployment guide further identifies DCA, TPC, FRA, and DBS as examples of optimizations performed, meaning the feature enhances dynamic RF control rather than disabling it.
Therefore, option D is the only correct answer. Options A, B, and C describe either legacy/static behavior, harmful power-only logic, or a fixed RF design model that contradicts Cisco AI Enhanced RRM. Reference topics:Automation and AI - AI/ML-driven RF optimization, Catalyst Center assurance, RRM telemetry, DCA, TPC, FRA, and DBS.
NEW QUESTION # 49
......
All exam questions that contained in our 350-101 study engine you should know are written by our professional specialists with three versions to choose from: the PDF, the Software and the APP online. In case there are any changes happened to the 350-101 Exam, the experts keep close eyes on trends of it and compile new updates constantly. It means we will provide the new updates of our 350-101 preparation dumps freely for you later after your payment.
New 350-101 Exam Prep: https://www.itexamsimulator.com/350-101-brain-dumps.html
P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by ITExamSimulator: https://drive.google.com/open?id=1zGKC3QWx3e-vZk-FszjJo-vAMyfBH-Hu