What's more, part of that Actual4test SC-200 dumps now are free: https://drive.google.com/open?id=192_M0NOrItNeqjJ7LTr1l4vyjHPYns2J
Our SC-200 exam guide has high quality of service. We provide 24-hour online service. If you have any questions in the course of using the SC-200 exam questions, you can contact us by email. We will provide you with excellent after-sales service with the utmost patience and attitude. And we will give you detailed solutions to any problems that arise during the course of using the SC-200 practice torrent. And our SC-200 study materials welcome your supervision and criticism. With the company of our SC-200 study materials, you will find the direction of success.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Respond to security incidents | 35–40% | - Automate incident response
|
| Topic 2: Manage security operations environment | 40–45% | - Configure and manage Microsoft Sentinel workspace
|
| Topic 3: Perform threat hunting | 20–25% | - Analyze and report hunting results
|
>> Latest SC-200 Exam Discount <<
We believe that one of the most important things you care about is the quality of our SC-200 exam materials, but we can ensure that the quality of it won’t let you down. Many candidates are interested in our SC-200 exam materials. What you can set your mind at rest is that the SC-200 exam materials are very high quality. SC-200 exam materials draw up team have a strong expert team to constantly provide you with an effective training resource. They continue to use their rich experience and knowledge to study the real exam questions of the past few years, to draw up such an exam materials for you. In other words, you can never worry about the quality of SC-200 Exam Materials, you will not be disappointed.
NEW QUESTION # 223
Your company uses line-of-business apps that contain Microsoft Office VBA macros.
You plan to enable protection against downloading and running additional payloads from the Office VBA macros as additional child processes.
You need to identify which Office VBA macros might be affected.
Which two commands can you run to achieve the goal?Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Answer: A,B
Explanation:
Must use Set-MpPreference with Enabled and then Add-MpPreference with Enabled. Audit does not block.
https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/enable-attack-surface-reduction?view=o365-worldwide#powershell
NEW QUESTION # 224
You have an Azure subscription that contains the users shown in the following table.
You need to delegate the following tasks:
* Enable Microsoft Defender for Servers on virtual machines.
* Review security recommendations and enable server vulnerability scans.
The solution must use the principle of least privilege.
Which user should perform each task? To answer, drag the appropriate users to the correct tasks. Each user may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Task
User
Enable Microsoft Defender for Servers on virtual machines:
User1
Review security recommendations and enable server vulnerability scans:
User1
* Query successful
This is a role-based access control (RBAC) question using the principle of least privilege.
The table of users and roles is:
Name
Role
User1
Security administrator
User2
Security reader
User3
Contributor
Export to Sheets
* Action: This is a management/configuration task at the subscription level, often related to enabling Defender plans and installing extensions on VMs.
* Required Permissions: The ability to modify security policies and settings in Microsoft Defender for Cloud and the permission to install extensions on VMs.
* The Security Administrator role is explicitly designed for this, granting permissions to manage the security features, policies, and program enrollment (like enabling Defender plans).
* The Contributor role can also perform this by installing the necessary agents and extensions, but it grants broad access to manage all resources, violating the principle of least privilege for a purely security-focused task.
* Least Privilege User: User1 (Security administrator)
* Action: This task has two parts:
* Review security recommendations: This is a read-only action. The Security Reader role is sufficient.
* Enable server vulnerability scans: This means configuring a security feature (Vulnerability Assessment), which requires write access to the security configuration or the resource itself.
* The Security Reader role cannot perform the "enable" action.
* The Security Administrator role has the permissions required to modify security policy and configuration to enable scanning features.
* The Contributor role can also do this, but again, the Security Administrator role is the least privileged for a security-specific configuration change.
* Least Privilege User: Since the entire task includes an "enable" (write) action, we must use the role that can perform both read and write security actions. User1 (Security administrator) is the appropriate choice.
Task
User
Enable Microsoft Defender for Servers on virtual machines:
User1
Review security recommendations and enable server vulnerability scans:
User1
NEW QUESTION # 225
You are informed of a new common vulnerabilities and exposures (CVE) vulnerability that affects your environment.
You need to use the Microsoft Defender portal to request remediation from the team responsible for the affected systems if there is a documented active exploit available.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
From Vulnerability Management, select Weaknesses, and search for and select the CVE.
Select Go to related security recommendations.
Create the remediation request.
According to Microsoft Defender Vulnerability Management documentation, the correct workflow for responding to a new CVE in your organization-especially when there is an active exploit-is to begin your investigation within the Vulnerability Management section of the Microsoft Defender portal.
From Vulnerability Management, select Weaknesses -Microsoft explains that all known CVEs are listed under Weaknesses in the Defender portal. You search by CVE ID (for example, CVE-2024-xxxx) to view its details, exploitability data, and the devices affected.
Select Go to related security recommendations -After opening the CVE details, the portal shows associated security recommendations that describe how to remediate the issue (such as updating software, removing an at-risk version, or applying a patch). Selecting Go to related security recommendations links the CVE directly to actionable remediation guidance.
Create the remediation request -Finally, Microsoft Defender for Endpoint allows security teams to formally request remediation from IT administrators or system owners. You can create a remediation request directly from the recommendation page, assigning it to the responsible group and specifying a due date.
This sequence aligns with Microsoft's recommended remediation workflow for CVEs as described in Defender Vulnerability Management documentation and ensures that remediation actions are tracked and executed efficiently through the portal.
# Therefore, the correct order is:
(1) From Vulnerability Management # Weaknesses # search CVE # (2) Go to related security recommendations # (3) Create remediation request.
NEW QUESTION # 226
You need to visualize Microsoft Sentinel data and enrich the data by using third-party data sources to identify indicators of compromise (IoC).
What should you use?
Answer: A
Explanation:
Notebooks are interactive tools that allow you to run Python code, query data, perform machine learning, and create visualizations. Notebooks can help you hunt for threats, investigate incidents, and perform data analysis using Microsoft Sentinel data and external data sources.
NEW QUESTION # 227
You have a Microsoft Sentinel workspace that contains a custom workbook.
You need to query the number of daily security alerts. The solution must meet the following requirements:
* Identify alerts that occurred during the last 30 days.
* Display the results in a timechart.
How should you complete the query? To answer, select the appropriate options in the answer area. NOTE:
Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
To create a query in Microsoft Sentinel (using Kusto Query Language - KQL) that displays the number of daily security alerts over the last 30 days in a timechart, you need to:
Filter the dataset (SecurityAlert) to include only alerts generated in the last 30 days.
Aggregate the number of alerts per provider per day using summarize.
Group those alerts into daily time buckets using bin(TimeGenerated, 1d).
Render the output visually with a timechart.
The correct query structure is:
SecurityAlert
| where TimeGenerated > = ago(30d)
| summarize count() by ProviderName, bin(TimeGenerated, 1d)
| render timechart
summarize # Used to aggregate or count data (e.g., total alerts) by specified fields. In this case, it's needed to count alerts per provider and per day.
bin # Used to group time-based data into evenly spaced intervals (1 day here) for trend visualization. It aligns timestamps to a fixed period boundary (daily).
lookup # Used to enrich data from another table, not aggregation.
project # Used to select specific columns, not to count or group.
make-series # Also used for time-series data but more suited for generating continuous series (useful for missing data handling). Here, bin is simpler and sufficient.
range # Used to create a sequence of numbers or times manually, not for aggregation.
# Final Query Answer:
SecurityAlert
| where TimeGenerated > = ago(30d)
| summarize count() by ProviderName, bin(TimeGenerated, 1d)
| render timechart
NEW QUESTION # 228
......
If you buy the SC-200 study materials of us, we ensure you to pass the exam. Since the SC-200 study materials have the quality and the accuracy, and it will help you pass exam just one time. Buying SC-200 exam dumps are pass guaranteed and money back guaranteed for the failure. Furthermore, we choose international confirmation third party for payment for the SC-200 Exam Dumps, therefore we can ensure you the safety of your account and your money. The refund money will return to your payment account.
SC-200 Download Free Dumps: https://www.actual4test.com/SC-200_examcollection.html
DOWNLOAD the newest Actual4test SC-200 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=192_M0NOrItNeqjJ7LTr1l4vyjHPYns2J