PDFExamDumps 考題大師的擬真試題覆蓋了真實的考試真題，已經成為考生通過 International Code Council 93-Tall-Mass-Timber-Buildings 考试的首選學習資料。93-Tall-Mass-Timber-Buildings 考試主要用於具有較高水準的實施顧問能力，獲取證書，以確保考生有一個堅實的專業基礎知識，有利於他們將此能力企業專業化。準備 International Code Council 的 93-Tall-Mass-Timber-Buildings 考試的考生，需要熟練了解我們的擬真試題，快速完成測試，就能順利通過考試。
| Section | Objectives |
|---|---|
| Topic 1: Tall Mass Timber Building Code Provisions | - Special Inspection Requirements
- Type IV Construction
|
>> 93-Tall-Mass-Timber-Buildings熱門題庫 <<
我們PDFExamDumps是一家專業的IT認證網站，它的認證成功率達到100%，許多考生實踐證明了的，因為我們PDFExamDumps擁有一支強大的IT專家隊伍，他們致力於廣大考生的考試題及答案，為廣大考生的切身利益而服務，用自己專業的頭腦和豐富的經驗來滿足考生們的需求，根據考生的需求從各個角度出發，針對性的設計適用性強的考試培訓資料，也就是 International Code Council的93-Tall-Mass-Timber-Buildings考試培訓資料，包括試題及答案。
問題 #20
For CLT, which of the following standards is used for the determination of bond line shear test for adhesives?
答案：C
解題說明：
ANSI/APA PRG 320 is the governing product standard for performance-rated cross-laminated timber, including adhesive qualification, bond integrity, manufacturing quality control, and required product identification. Accordingly, option D is correct.
Bond-line performance is critical because CLT panels depend on structural adhesive to transfer shear forces between laminations and maintain composite action. PRG 320 establishes qualification and quality-assurance requirements intended to verify that adhesive bonds remain structurally reliable and resist delamination or inadequate bond development. Testing and manufacturing controls under this standard address the completed CLT product rather than treating the adhesive as an isolated material.
AITC 113 concerns dimensional tolerances and related requirements for structural glued-laminated timber rather than CLT bond-line shear qualification. ASTM C557 addresses adhesives for ceramic tile and is unrelated to structural timber manufacture. ANSI 117 is not the governing CLT manufacturing standard.
During inspection, the special inspector ordinarily does not reproduce factory bond-line tests on-site. Instead, the inspector verifies the CLT manufacturer's identification, certification marks, panel grade, layup designation, and conformance with PRG 320 and the approved construction documents.
References/Topics: 2021 IBC Section 2303.1.4; ANSI/APA PRG 320; CLT adhesive-bond qualification and manufacturing quality assurance.
問題 #21
One code-recognized method for calculating the fire-resistance rating of exposed wood members and decking is:
答案：D
解題說明：
The intended answer is ANSI/AWC NDS Chapter 16. The video option uses "AWS," but the correct standards organization is the American Wood Council-AWC . Option D is therefore correct based on its intended reference.
IBC Section 722.1 expressly permits exposed wood members and wood decking to have their calculated fire resistance determined in accordance with Chapter 16 of the ANSI/AWC National Design Specification for Wood Construction. The method evaluates charring, the effective char depth, the reduced residual cross section, elevated-temperature effects, loading, and the remaining structural capacity for the required exposure period.
ACI 216.1 applies to concrete and masonry fire resistance. TMS 0216 addresses masonry assemblies. ASCE
29 Chapter 5 provides procedures for calculating the fire resistance of structural steel assemblies. Those references are code-recognized methods, but they apply to different construction materials.
For mass timber inspection, the approved calculations should identify the exposed surfaces, required rating, timber species or product, member dimensions, design loads, protective contribution, and connection treatment. Field reductions in member dimensions can invalidate the calculated fire resistance.
References/Topics: 2021 IBC Section 722.1; ANSI/AWC NDS Chapter 16; calculated fire resistance of exposed wood members and decking.
問題 #22
Which of the following provisions for mass timber used for interior exit and elevator hoistway enclosures is true?
答案：A
解題說明：
Option A correctly applies the protection requirements for mass timber used in qualifying interior exit and elevator hoistway enclosures. Where a two-hour, or 120-minute, fire-resistance rating is required, the noncombustible protection must contribute not less than two-thirds of that required rating. Two-thirds of 120 minutes is 80 minutes.
The 2021 IBC provisions for Type IV-A require interior mass timber surfaces to be protected with compliant noncombustible materials. The assigned protection time is determined under Section 722.7 and cannot be less than the applicable minimum. Option B is incorrect because 40 minutes would provide only one-third of a two-hour rating; Type IV-B protected mass timber generally requires at least 80 minutes for a two-hour element. Option C does not correctly describe the special protection path applicable to mass timber exit and hoistway enclosures. Option D is also incorrect because Type IV-HT is not governed by the tall mass timber enclosure provision stated in the question.
The inspector must verify the total assigned protection time, membrane type, number of layers, fastening, joints, corners, penetrations, and continuity on both required faces of the enclosure.
References/Topics: 2021 IBC Sections 602.4, 602.4.1.2 and 722.7.1; protection of mass timber shaft and exit enclosures.
問題 #23
Which of the following is true regarding fire-resistance rating protection provided by noncombustible covering material?
答案：D
解題說明：
IBC Table 722.7.1(2) assigns a 40-minute protection contribution to 5/8-inch Type X gypsum board .
Therefore, option D is correct.
The same table assigns 25 minutes to 1/2-inch Type X gypsum board. Consequently, option B overstates the protection contribution of the thinner Type X panel. Ordinary gypsum board values appearing elsewhere in Section 722 cannot simply be substituted for the specific mass timber noncombustible protection values in Table 722.7.1(2). Options A and C therefore do not state the protection contribution recognized by the mass timber table.
These assigned values are particularly important when multiple layers are required. For example, a two-hour building element requires at least 80 minutes of noncombustible protection under Table 722.7.1(1), which can be satisfied prescriptively with two properly installed layers of 5/8-inch Type X gypsum board, each contributing 40 minutes.
The contribution is valid only when the gypsum board is installed and fastened in accordance with Section
722.7.2.
References/Topics: 2021 IBC Tables 722.7.1(1) and 722.7.1(2); Section 722.7.2; Type X gypsum noncombustible protection.
問題 #24
Buildings of Types IV-A, IV-B, and IV-C construction designed to be greater than six stories above grade plane shall meet which of the following requirements for fire safety practices during construction?
答案：C
解題說明：
Option A is an exact requirement of the 2021 International Fire Code Section 3303.5 . For Type IV-A, IV- B, and IV-C buildings designed to exceed six stories above grade plane, standpipes must be provided in accordance with IFC Section 3313, unless otherwise approved by the fire code official.
The IFC also requires a water supply for fire department operations, but that supply must be approved by the fire code official and fire chief; the code does not specifically mandate that it be a "portable" water supply.
Option B is therefore incorrect.
The remaining options alter important numerical requirements. Where noncombustible protection is required and construction exceeds six stories, at least one layer , not two, must be installed on applicable building elements more than four levels below active mass timber construction before additional floor levels are erected. Required exterior wall coverings are likewise required more than four levels below active mass timber construction, rather than two.
These safeguards reduce the amount of exposed combustible construction while ensuring that effective fire department infrastructure progresses with the building.
References/Topics: 2021 IFC Section 3303.5; Sections 3313 and related construction-stage fire protection requirements.
問題 #25
......
通過那些很多已經通過International Code Council 93-Tall-Mass-Timber-Buildings 認證考試的IT專業人員的回饋，他們的成功得益於PDFExamDumps的説明。PDFExamDumps提供的針對性測試練習題和答案給了他們很大幫助，節約了他們的寶貴的時間和精力，讓他們輕鬆順利地通過他們第一次參加的International Code Council 93-Tall-Mass-Timber-Buildings 認證考試。所以PDFExamDumps是個值得你們信賴的網站。選擇了PDFExamDumps，下一個成功的IT人士就是你，PDFExamDumps會成就你的夢想。
93-Tall-Mass-Timber-Buildings考題套裝: https://www.pdfexamdumps.com/93-Tall-Mass-Timber-Buildings_valid-braindumps.html