For a long time, high quality is our NSEI_OTS_AR-7.6 exam torrent constantly attract students to participate in the use of important factors, only the guarantee of high quality, to provide students with a better teaching method, and at the same time the NSEI_OTS_AR-7.6 practice materials bring more outstanding teaching effect. And with the three different versions of our NSEI_OTS_AR-7.6 Exam Questions on the web, so high-quality NSEI_OTS_AR-7.6 learning guide help the students know how to choose suitable for their own learning method, our NSEI_OTS_AR-7.6 study materials are a very good option for you to pass the exam.
| Section | Objectives |
|---|---|
| Topic 1: Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Topic 2: Asset management | - Explain OT standard and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Fortinet Security Fabric for an OT network |
| Topic 3: Network security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Topic 4: Network access control | - Configure network segmentation schemas - Explain OT Ethernet concepts - Configure network access authentication |
>> Cert NSEI_OTS_AR-7.6 Guide <<
Now you can pass Fortinet NSE I - OT Security 7.6 Architect exam without going through any hassle. You can only focus on NSEI_OTS_AR-7.6 exam dumps provided by the TestKingIT, and you will be able to pass the Fortinet NSE I - OT Security 7.6 Architect test in the first attempt. We provide high quality and easy to understand NSEI_OTS_AR-7.6 pdf dumps with verified Fortinet NSEI_OTS_AR-7.6 for all the professionals who are looking to pass the NSEI_OTS_AR-7.6 exam in the first attempt. The NSEI_OTS_AR-7.6 training material package includes latest NSEI_OTS_AR-7.6 PDF questions and practice test software that will help you to pass the NSEI_OTS_AR-7.6 exam.
NEW QUESTION # 37
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 38
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: C
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 39
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: D
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 40
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 41
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. FortiGate queries FortiGuard servers . The study guide explains the device detection process very clearly: "First, FortiGate attempts to detect the devices based on the information in the local device database (CIDB). If FortiGate cannot detect the devices locally, it queries the FortiGuard servers by sending data about the unknown devices to the FortiGuard servers. In response, the FortiGuard servers provide additional information about those devices." This directly answers the question and shows that querying FortiGuard is the next step after local detection fails.
Option D is incorrect because the guide says FortiGate checks the local device database (CIDB) first, before this next step. Option B refers more to FortiNAC-style profiling logic, not FortiGate's OT device detection flow. Option C is also incorrect because service connectors are not described here as the immediate follow-up step for unknown local device detection. The study guide specifically identifies FortiGuard servers as the next destination for device identification assistance.
NEW QUESTION # 42
......
You may want to own a NSEI_OTS_AR-7.6 certificate to prove that you are competent and boost excellent practical abilities in some certain area. Thus you will be regarded as the capable people and be respected. Passing the test NSEI_OTS_AR-7.6 certification can help you realize your goals and if you buy our NSEI_OTS_AR-7.6 Guide Torrent you will pass the NSEI_OTS_AR-7.6 exam easily. Our NSEI_OTS_AR-7.6 exam questions are written by the most professional experts, so the quality of our NSEI_OTS_AR-7.6 learning material is wonderful. And we always keep our NSEI_OTS_AR-7.6 study guide the most updated for you to pass the exam.
NSEI_OTS_AR-7.6 Valid Cram Materials: https://www.testkingit.com/Fortinet/latest-NSEI_OTS_AR-7.6-exam-dumps.html