Your Partner in JN0-481 Exam Preparation with Free Demos and Updates

What's more, part of that Pass4Leader JN0-481 dumps now are free: https://drive.google.com/open?id=1BkwAlRwJPHiGWv58OWzjJF8Ecl8S-sQf

Every applicant goal is to find success in the Juniper JN0-481 exam for the very first time. Candidates make an effort to study for the Juniper JN0-481 test and are looking for a platform that ensures they will pass the JN0-481 Exam on the first attempt. Candidates have fear of money and time loss because of using invalid Juniper JN0-481 practice test material.

Juniper JN0-481 Exam Syllabus Topics:

Topic	Details
Topic 1	Apstra Design Phase: Covers pre-deployment planning elements such as reference designs, logical devices, device profiles, rack types, interface maps, and templates, including their configuration and troubleshooting.
Topic 2	Juniper Apstra Architecture: Introduces core Apstra components including the server, device agents, and UI, along with administrative features such as RBAC, event logging, and syslog.
Topic 3	Data Center Multitenancy: Covers multi-tenant network management through routing zones, VRFs, virtual networks, connectivity templates, security policies, VMware integration, and Data Center Interconnect.

>> Latest JN0-481 Braindumps <<

JN0-481 Latest Braindumps Sheet - JN0-481 Latest Test Preparation

When we choose to find a good job, there is important to get the JN0-481 certification as you can. There is a fabulous product to prompt the efficiency--the JN0-481 exam prep, as far as concerned, it can bring you high quality learning platform to pass the variety of exams. Our product is elaborately composed with major questions and answers. It only takes you 20 hours to 30 hours to do the practice. After your effective practice, you can master the examination point from the JN0-481 Test Question. Then, you will have enough confidence to pass it.

Juniper Data Center, Specialist (JNCIS-DC) Sample Questions (Q34-Q39):

NEW QUESTION # 34
When editing a device configuration to install some manual changes, which procedure should be followed?

A. Add a persistent change to a device configuration with a configlet.
B. Edit the pristine configuration of the device.
C. Edit the configuration on the device directly by the CLI; the changes will automatically be adjusted in the Juniper Apstra configuration
D. Delete the device from the Juniper Apstra system, change the configuration, then re-import the device.

Answer: A

Explanation:
A configlet is a small piece of configuration that can be applied to a device or a group of devices to make persistent changes that are not overwritten by Apstra. Configlets can be used to install manual changes that are not part of the Apstra rendered configuration, such as custom commands, scripts, or features. Configlets can be created, edited, and deleted from the Apstra GUI or CLI.

NEW QUESTION # 35
You want to gracefully take a device out of service to perform an OS upgrade. How would you accomplish this task using Juniper Apstra?

A. After selecting the device in the Staged tab, you would select Deploy Mode then Upgrade.
B. After selecting the device in the Dashboard tab, you would select Deploy Mode then Upgrade.
C. After selecting the device in the Active tab, you would select Deploy Mode then Drain.
D. After selecting the device in the Staged tab, you would select Deploy Mode then Drain.

Answer: C

NEW QUESTION # 36
What is the purpose of a Juniper Apstra rack?

A. It stores IP address and ASN pool information.
B. It stores information on how leaf nodes connect to generic devices
C. It stores information on how pods connect to super spines.
D. It stores device port data rates and vendor information.

Answer: B

NEW QUESTION # 37
You connect two single-homed servers using Juniper Apstra as shown in the exhibit. You are using the ERB design blueprint with two virtual networks in a common routing zone. In this scenario, which two types of VXLAN tunnels will be automatically created by the EVPN control plane? (Choose two.)

A. EVPN signaled route Type-3 VXLAN tunnels
B. EVPN signaled route Type-6 VXLAN tunnels
C. EVPN signaled route Type-2 VXLAN tunnels
D. EVPN signaled route Type-8 VXLAN tunnels

Answer: A,C

Explanation:
EVPN route Type-3 is used to advertise the IP address of the VTEP and the VNIs that it supports.
This allows the VTEPs to discover each other and form VXLAN tunnels for the VNIs that they have in common. EVPN route Type-2 is used to advertise the MAC and IP addresses of the hosts connected to the VTEPs. This allows the VTEPs to learn the MAC-to-IP bindings and the MAC-to- VTEP mappings for the hosts in the same VNI. Therefore, these two types of VXLAN tunnels will be automatically created by the EVPN control plane when using Juniper Apstra with the ERB design blueprint and two virtual networks in a common routing zone.

NEW QUESTION # 38
You are considering the bridged overlay EVPN-VXLAN architecture. In this scenario, how many VLANs would be enabled in the VLAN-based service type at the MAC-VRF EVPN instance level?

A. 4000 VLANs
B. Four VLANs
C. Two VLANs
D. One VLAN

Answer: D

Explanation:
In Junos EVPN, the service type determines how VLANs (broadcast domains) are mapped into EVPN constructs. With VLAN-based service, the mapping is one-to-one: a single VLAN (single broadcast domain) maps to a single EVPN instance (EVI), resulting in a separate bridge table per VLAN. When you implement EVPN-VXLAN in a bridged overlay (L2 extension over an L3 underlay), leaf devices act as VTEPs and encapsulate VLAN traffic into VXLAN using the associated VNI, but the service-type mapping rule still applies.
At the MAC-VRF hierarchy, you configure the EVPN-VXLAN parameters and choose the service type for that EVPN instance. If the service type selected is VLAN-based, then the EVI represents exactly one VLAN at that EVPN instance level. If you need multiple VLANs under the same MAC-VRF/EVI construct, Junos provides alternative service types (for example, VLAN-aware or VLAN-bundle) specifically intended to associate multiple VLANs with a single EVPN instance; that is not what VLAN-based service does.
Therefore, in a bridged overlay EVPN-VXLAN design using VLAN-based service at the MAC-VRF EVPN instance level, the correct answer is one VLAN. This remains true regardless of how many total VLANs exist across the fabric; each VLAN-based EVI handles a single VLAN.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/concept/evpn-based-services.html
https://www.juniper.net/documentation/us/en/software/junos/evpn/topics/concept/mac-vrf-routing-instance-overview.html

NEW QUESTION # 39
......

You can access our web-based Data Center, Specialist (JNCIS-DC) (JN0-481) practice exam from anywhere with an internet connection, and fit your studying into your busy schedule. No more traveling to a physical classroom, wasting time and money on gas or public transportation. With the web-based Juniper JN0-481 Practice Test, you can evaluate and enhance your progress. Customizable web-based mock exam creates a real Data Center, Specialist (JNCIS-DC) (JN0-481) exam environment and works on all operating systems.

JN0-481 Latest Braindumps Sheet: https://www.pass4leader.com/Juniper/JN0-481-exam.html

BTW, DOWNLOAD part of Pass4Leader JN0-481 dumps from Cloud Storage: https://drive.google.com/open?id=1BkwAlRwJPHiGWv58OWzjJF8Ecl8S-sQf