NSEI_OTS_AR-7.6 Reliable Dumps Sheet, NSEI_OTS_AR-7.6 Valid Test Dumps

Our professional experts have compiled the NSEI_OTS_AR-7.6 exam questions carefully and skillfully to let all of our worthy customers understand so that even an average candidate can learn the simplified information on the syllabus contents and grasp it to ace exam by the first attempt. It is the easiest track that can lead you to your ultimate destination with our NSEI_OTS_AR-7.6 Practice Engine. And as our pass rate of the NSEI_OTS_AR-7.6 learning guide is high as 98% to 100%, you will pass the exam for sure.

Fortinet NSEI_OTS_AR-7.6 Exam Syllabus Topics:

SectionObjectives
Network Security- Configure automation
- Configure security inspections for industrial protocols
- Configure virtual patching
Asset Management- Explain OT standards and Fortinet compliance
- Implement device detection on FortiGate and FortiNAC
- Use Fortinet Security Fabric for an OT network
Network Access Control- Explain OT Ethernet concepts
- Configure network access authentication
- Configure network segmentation schemas
Monitoring and Risk Assessment- Analyze security reports from FortiAnalyzer
- Perform risk assessment and management
- Create FortiAnalyzer event handlers

>> NSEI_OTS_AR-7.6 Reliable Dumps Sheet <<

NSEI_OTS_AR-7.6 Valid Test Dumps | NSEI_OTS_AR-7.6 Latest Test Online

Our EduDump offers you the high-quality NSEI_OTS_AR-7.6 exam dumps and answers, and make you be closer to success. If you are still worried, you can download NSEI_OTS_AR-7.6 exam dumps' free demo and answers on probation on EduDump.COM. We promise, when you purchase NSEI_OTS_AR-7.6 Exam Dumps and answers, we will also provide one year free renewal service for you.

Fortinet NSE I - OT Security 7.6 Architect Sample Questions (Q26-Q31):

NEW QUESTION # 26
Refer to the exhibit.

A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)

Answer: A

Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .


NEW QUESTION # 27
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)

Answer: A,D


NEW QUESTION # 28
Refer to the exhibit.

A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)

Answer: A,B

Explanation:
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.


NEW QUESTION # 29
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)

Answer: A

Explanation:
Explanation:


NEW QUESTION # 30
Refer to the exhibit.

A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)

Answer: B,D

Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .


NEW QUESTION # 31
......

Our NSEI_OTS_AR-7.6 simulating materials let the user after learning the section of the new curriculum can through the way to solve the problem to consolidate, and each section between cohesion and is closely linked, for users who use the NSEI_OTS_AR-7.6 exam prep to build a knowledge of logical framework to create a good condition. And our pass rate for NSEI_OTS_AR-7.6 learning guide is high as 98% to 100%, which is also proved the high-guality of our exam products. You can totally relay on our NSEI_OTS_AR-7.6 exam questions.

NSEI_OTS_AR-7.6 Valid Test Dumps: https://www.edudump.com/exams/Fortinet/NSEI_OTS_AR-7.6/