BTW, DOWNLOAD part of Itcertking 300-110 dumps from Cloud Storage: https://drive.google.com/open?id=19f7hPQJfQkMGWQTYKrT0efc8yV9irbVD
Itcertking is one of the only few platforms offering updated Cisco exam preparatory products for the 300-110 at an affordable rate. Our Cisco 300-110 exam questions preparation products help you know your weaknesses before the actual Designing Cisco Wireless Networks exam. Cisco 300-110 Exam Questions preparation materials are affordable for everyone. Moreover, we give you free updates for 365 days. Itcertking offers reliable, updated Cisco Exam Questions at an affordable price and also gives a 30% discount on all Cisco exam questions.
| Section | Weight | Objectives |
|---|---|---|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Mobility Design | 25% | - Mobility architecture models
|
| Wireless Site Survey | 25% | - Design requirements collection and constraint evaluation
- Pre-deployment survey and validation - Layer 1 site survey execution and analysis |
>> 300-110 Reliable Test Question <<
Based on the credibility in this industry, our 300-110 study braindumps have occupied a relatively larger market share and stable sources of customers. Such a startling figure --99% pass rate is not common in this field, but we have made it with our endless efforts. The system of 300-110 test guide will keep track of your learning progress in the whole course. Therefore, you can have 100% confidence in our 300-110 exam guide. According to our overall evaluation and research, seldom do we have cases that customers fail the 300-110 Exam after using our study materials. But to relieve your doubts about failure in the test, we guarantee you a full refund from our company by virtue of the related proof of your report card. Of course you can freely change another 300-110 exam guide to prepare for the next exam. Generally speaking, our company takes account of every clientโ difficulties with fitting solutions.
NEW QUESTION # 64
A network engineer is designing a new wireless network for a campus. The network must include optimized performance, avoid interference, availability in high-density areas, and roaming. Which two approaches must be taken? (Choose two.)
Answer: C,E
Explanation:
The design requirements -- optimized performance, interference avoidance, high-density support, and roaming capability -- collectively point to a dual-band strategy using narrow channel widths.
For 5 GHz operation (Option A), 20 MHz channels are the correct choice for high-density and campus- scale deployments. The 5 GHz band has a significantly greater number of non- overlapping channels compared to 2.4 GHz (up to 24 non-overlapping 20 MHz channels in UNII-
1, UNII-2, and UNII-3), enabling a robust channel reuse plan with minimal co-channel interference.
NEW QUESTION # 65
A university wants to deploy a high density of APs in an area where a high number of users congregate.
Which functionality allows the university to optimize the RF settings for APs that operate in different environments or coverage zones?
Answer: C
Explanation:
RF Profiles are a Cisco WLC configuration construct that allows administrators to define a customized set of Radio Resource Management (RRM) parameters and apply them to a subset of APs operating in a specific environment or coverage zone. Within a university high-density deployment - where a lecture hall, outdoor quad, cafeteria, and library may each require fundamentally different RF settings - RF Profiles enable differentiation without globally modifying all RRM parameters. An RF Profile can define custom values for:
minimum mandatory data rates, maximum transmit power, minimum transmit power, channel width (20/40
/80 MHz), RxSOP thresholds, client load balancing parameters, and coverage hole detection sensitivity. This allows the engineer to apply aggressive interference mitigation settings to high-density assembly areas while maintaining full-coverage settings for perimeter zones. AP Groups (Option A) assign WLANs and interface mappings to subsets of APs but do not directly control RF parameters. RF Groups (Option B) are automatically formed by RRM and represent a cluster of APs coordinating channel and power assignment. AP Profiles (Option C) define AP behavior parameters such as NTP and SSH settings, not RF optimization parameters. Reference: WLSD Study Guide - RF Profile Configuration, High-Density WLAN Design, RRM Parameter Customization.
NEW QUESTION # 66
An enterprise network is deploying two Cisco Catalyst 9800 WLCs in a data center to ensure uninterrupted wireless services for a campus with thousands of users. The IT management requests a design that enables seamless failover without client reauthentication or loss of connectivity if one controller fails. Ease of configuration and ongoing management are high priorities. The controllers will be connected via a high-speed LAN segment, and both must support full active-passive redundancy for all managed APs. Which design approach meets the requirements?
Answer: D
Explanation:
Cisco Stateful Switchover (SSO) on the Catalyst 9800 platform is the definitive high availability solution when requirements specify zero client reauthentication during failover, active-passive redundancy, and ease of management. With SSO enabled, the active and standby 9800 WLCs maintain a synchronized state database via a dedicated redundancy link - this includes all client association state, authentication credentials, AP join information, and WLAN configurations. When the active controller fails, the standby assumes control instantaneously with no CAPWAP session teardown and no 802.1X reauthentication required. The Redundancy Management Interface (RMI) provides a dedicated in-band keepalive and state synchronization path. N+1 redundancy (Option D) requires APs to rejoin a new controller and clients to reauthenticate, failing the seamless requirement. Manual configuration synchronization (Options A and C) is operationally complex and does not guarantee stateful failover. VRRP provides gateway redundancy at Layer 3 but does not address CAPWAP session continuity. Reference: WLSD Study Guide - Catalyst 9800 High Availability, SSO Architecture, Redundancy Management Interface Configuration.
NEW QUESTION # 67
A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?
Answer: C
Explanation:
The requirement for users to retain their session state and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco's wireless architecture, IP address preservation across controller boundaries is achieved through inter- controller mobility -- specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client's traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires a mobility tunnel between WLC-A and WLC-B with both controllers configured in the same mobility group name -- the group name is the trust identifier that permits the mobility tunnel and anchor- foreign relationship to form. Without the same group name, the controllers will not form a trusted mobility peer relationship.
NEW QUESTION # 68
An engineer must design AP placements for a new branch office that contains two floors. The engineer uses Ekahau to complete the predictive survey. To calculate the signal bleed through between floors, the engineer creates a building, adds the floors, and attenuation areas. After the scale is set, what else must be added on the floors to accurately measure the signal bleed at a specific location?
Answer: B
Explanation:
In Ekahau Site Survey's multi-floor predictive modeling workflow, alignment points are the critical mechanism that allows the software to understand the precise vertical spatial relationship between floors in a multi-story building. Once floor plans are imported with their scale correctly defined, alignment points must be placed on each floor at the same real-world physical location -- such as a stairwell corner, elevator shaft, or structural column -- so that Ekahau can accurately calculate vertical signal propagation and inter-floor RF bleed. Without alignment points, the software has no spatial reference to determine which area on Floor 2 is directly above a given point on Floor 1, making floor-to-floor signal bleed calculations geometrically impossible.
NEW QUESTION # 69
......
It's time to take the Cisco 300-110 practice test for self-assessment once you have prepared with 300-110 PDF questions. Taking Itcertking's web-based Cisco 300-110 practice test is the best method to feel the real Cisco 300-110 Exam scenario. Itcertking offers the customizable web-based Cisco 300-110 practice test that is compatible with all browsers like MS Edge, Chrome, Firefox, etc.
Valid 300-110 Test Cram: https://www.itcertking.com/300-110_exam.html
What's more, part of that Itcertking 300-110 dumps now are free: https://drive.google.com/open?id=19f7hPQJfQkMGWQTYKrT0efc8yV9irbVD