You can access our web-based Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice exam from anywhere with an internet connection, and fit your studying into your busy schedule. No more traveling to a physical classroom, wasting time and money on gas or public transportation. With the web-based Fortinet NSEI_OTS_AR-7.6 Practice Test, you can evaluate and enhance your progress. Customizable web-based mock exam creates a real Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam environment and works on all operating systems.
| Section | Objectives |
|---|---|
| Asset Management | - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
| Network Access Control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Network Security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
>> New NSEI_OTS_AR-7.6 Exam Labs <<
It is human nature to pursue wealth and success. No one wants to be a common person. In order to become a successful person, you must sharpen your horizons and deepen your thoughts. Our NSEI_OTS_AR-7.6 study materials can help you update yourself in the shortest time. You just need to make use of your spare time to finish learning our NSEI_OTS_AR-7.6 Study Materials. So your normal life will not be disturbed. Please witness your growth after the professional guidance of our NSEI_OTS_AR-7.6 study materials.
NEW QUESTION # 28
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: A,D
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 29
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: B
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 30
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: C,D
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 31
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: A,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 32
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: D
Explanation:
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management :
* Vulnerability Visibility : The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities .
* Virtual Patching Feature : In the OT Security 7.6 architecture, the " Vulnerabilities " column is populated through the OT Security Service license, which includes " OT vulnerability correlation definitions & virtual patching signatures " .
* Correlation Mechanism : FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.
* Architectural Implementation : Virtual patching is a critical component of the " Protection " layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.
* Exhibit Analysis : The presence of identified vulnerabilities (the number " 8 " in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
NEW QUESTION # 33
......
The internet is transforming society, and distance is no longer an obstacle. You can download our NSEI_OTS_AR-7.6 exam simulation from our official website, which is a professional platform providing the most professional NSEI_OTS_AR-7.6 practice materials. You can get them within 15 minutes without waiting. What is more, you may think these high quality NSEI_OTS_AR-7.6 Preparation materials require a huge investment on them. Actually we eliminate the barriers blocking you from our NSEI_OTS_AR-7.6 practice materials. The price of our NSEI_OTS_AR-7.6 exam question is quite favourable for you to buy.
NSEI_OTS_AR-7.6 Exam Vce Format: https://www.itcertkey.com/NSEI_OTS_AR-7.6_braindumps.html