Free PDF Juniper - JN0-364 - Newest Authorized Service Provider Routing and Switching, Specialist (JNCIS-SP) Test Dumps

BTW, DOWNLOAD part of iPassleader JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1tmOIEfo7I3nL4fMvnKCtJkrGpYQ_XELd

As is known to us, a suitable learning plan is very important for all people. For the sake of more competitive, it is very necessary for you to make a learning plan. We believe that the Software version of our JN0-364 actual exam will help you make a good learning plan which is a model test in limited time simulating the Real JN0-364 Exam, if you finish the model JN0-364 test, our system will generate a report according to your performance.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
MPLS and Service Provider Technologies- VPN services
  • 1. Layer 2 VPN overview
    • 2. Layer 3 VPN concepts
      - MPLS fundamentals
      • 1. LDP operations
        • 2. Label switching and forwarding
          Troubleshooting and Operations- Performance and monitoring
          • 1. Traffic analysis basics
            • 2. System logging and alarms
              - Network troubleshooting methodology
              • 1. Junos operational commands
                • 2. Protocol verification tools
                  Service Provider Architecture & Junos Fundamentals- Junos OS routing fundamentals
                  • 1. Junos CLI and configuration hierarchy
                    • 2. Routing table and forwarding concepts
                      - Service provider network design basics
                      • 1. Scalability considerations
                        • 2. Core, edge, and access architecture
                          BGP and Routing Policy- Routing policy control
                          • 1. Import/export policies
                            • 2. Route filtering and manipulation
                              - BGP fundamentals
                              • 1. Attributes and path selection
                                • 2. eBGP and iBGP operations
                                  OSPF and IS-IS Routing Protocols- OSPF configuration and troubleshooting
                                  • 1. Areas and LSAs
                                    • 2. Adjacency and neighbor states
                                      - IS-IS operation in service provider networks
                                      • 1. LSP and SPF calculation
                                        • 2. Levels and routing hierarchy

                                          >> Authorized JN0-364 Test Dumps <<

                                          How Can You Pass The Juniper JN0-364 Exam?

                                          As the saying goes, to develop study interest requires to giving learner a good key for study, this is promoting learner active development of internal factors. The most function of our JN0-364 question torrent is to help our customers develop a good study habits, cultivate interest in learning and make them pass their exam easily and get their JN0-364 Certification. All workers of our company are working together, in order to produce a high-quality product for candidates. I believe that our JN0-364 exam torrent will be very useful for your future.

                                          Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q82-Q87):

                                          NEW QUESTION # 82
                                          Click the Exhibit button.

                                          All devices in the network are configured correctly and the path requirements are valid.
                                          Referring to the exhibit, which two statements are correct? (Choose two.)

                                          Answer: A,C


                                          NEW QUESTION # 83
                                          Which IPv6 extension header is used to specify intermediate nodes for a packet's path?

                                          Answer: D

                                          Explanation:
                                          The IPv6 Routing extension header is used to specify intermediate nodes that a packet must traverse before reaching its final destination. It allows the sender to define a list of routers that the packet should pass through, enabling source routing functionality in IPv6.


                                          NEW QUESTION # 84
                                          In OSPF, which three fields must match between neighbors before forming an adjacency? (Choose three.)

                                          Answer: B,C,D

                                          Explanation:
                                          For OSPF routers to transition from the "Init" state to a full adjacency, they must agree on several parameters exchanged within theirHello packets. If these parameters do not match, the routers will refuse to form a neighbor relationship, a common point of failure in service provider networks.
                                          According to Juniper Networks documentation, the following fields are mandatory matches:
                                          * Hello Interval (Option B):The frequency at which Hello packets are sent. Default is 10 seconds on broadcast networks.
                                          * Dead Interval (Option D):The time a router waits without receiving a Hello before declaring a neighbor down. Default is 4 times the Hello interval.
                                          * Network Mask (Option C):On broadcast and NBMA (Non-Broadcast Multi-Access) segments, the subnet masks must match because OSPF uses the mask to determine the network boundaries for the link-state advertisements.
                                          * Area ID:Routers must belong to the same logical OSPF area.
                                          * Authentication:If configured, the type and password/key must be identical.
                                          Why other options are incorrect:
                                          * Router Priority (Option A):This is used to influence the election of the Designated Router (DR). It doesnotneed to match; in fact, different priorities are often used to ensure a specific router becomes the DR.
                                          * Designated Router (Option E):The DR is theresultof an election that happens after the initial Hello exchange. It is not a field that must match beforehand to start the process.
                                          By ensuring the Hello/Dead timers and the Subnet Mask are synchronized, OSPF guarantees a stable and predictable environment for the subsequent exchange of Link-State Advertisements (LSAs).


                                          NEW QUESTION # 85
                                          By default, which router in an MPLS LSP removes the PLS header?

                                          Answer: D


                                          NEW QUESTION # 86
                                          You are designing an MPLS network and want to ensure that traffic traverses an LSP between PE routers that follow an explicit path through the core. Which protocol would accomplish this task?

                                          Answer: A

                                          Explanation:
                                          In a Juniper Networks MPLS environment, the selection of a signaling protocol depends heavily on the requirement for traffic engineering and path control. To satisfy the requirement for anexplicit path-where the network architect defines specific hop-by-hop routers that the traffic must traverse-theResource Reservation Protocol (RSVP)is the necessary choice.
                                          According to Juniper documentation, RSVP (specifically RSVP-TE) supports the use ofExplicit Route Objects (EROs). When you configure an LSP in Junos OS, you can define a path consisting of a series of IP addresses (strict or loose hops). RSVP then signals the LSP along that exact sequence of routers, reserving resources and establishing labels as it goes. This allows for precise control over the network's traffic patterns, enabling administrators to steer traffic away from congested links or toward specific high-bandwidth paths.
                                          In contrast,LDP (Label Distribution Protocol)(Option D) is a "best-effort" signaling protocol. LDP strictly follows the Interior Gateway Protocol (IGP) shortest path. It does not support explicit paths or traffic engineering constraints; it simply builds a "mesh" of labels based on the existing routing table.IS-IS(Option C) is an IGP used to populate the routing table and TED but does not signal labels.BGP(Option A) is used for service delivery (like L3VPNs) but relies on an underlying transport LSP (built by RSVP or LDP) to reach its next hop. Therefore, only RSVP provides the mechanism for explicit path manipulation.


                                          NEW QUESTION # 87
                                          ......

                                          As we know, our products can be recognized as the most helpful and the greatest Juniper JN0-364 test engine across the globe. Even though you are happy to hear this good news, you may think our price is higher than others. We can guarantee that we will keep the most appropriate price because we want to expand our reputation of Juniper JN0-364 Preparation test in this line and create a global brand about the products.

                                          JN0-364 Valid Cram Materials: https://www.ipassleader.com/Juniper/JN0-364-practice-exam-dumps.html

                                          What's more, part of that iPassleader JN0-364 dumps now are free: https://drive.google.com/open?id=1tmOIEfo7I3nL4fMvnKCtJkrGpYQ_XELd