We are committed to help you pass the exam just one time, so that your energy and time on practicing NSE7_SSE_AR-26 exam braindumps will be paid off. NSE7_SSE_AR-26 learning materials are high-quality, and they will help you pass the exam. Moreover, NSE7_SSE_AR-26 exam braindumps contain both questions and answers, and itโs convenient for you to check answers after training. We offer you free update for one year for NSE7_SSE_AR-26 Training Materials, and the update version will be sent to you automatically. We have online and offline service for NSE7_SSE_AR-26 exam materials, if you have any questions, donโt hesitate to consult us.
| Section | Objectives |
|---|---|
| Integration | - FortiGate integration - SD-WAN integration - Enterprise networking scenarios |
| Operations and Troubleshooting | - Monitoring and analytics - Troubleshooting deployment and connectivity - Log analysis - Centralized management |
| Policy and Security Services | - Threat protection - Application control - Web filtering - Security policy design - DNS filtering |
| FortiSASE Architecture and Design | - Design secure internet access (SIA) - Design secure private access (SPA) - Design secure SaaS access (SSA) - Select appropriate deployment models |
| Identity and Access | - Zero Trust Network Access (ZTNA) - Authentication and identity providers - Endpoint posture and compliance |
>> Reliable NSE7_SSE_AR-26 Test Vce <<
The Fortinet wants to win the trust of Fortinet NSE7_SSE_AR-26 exam candidates at any cost. To do this the Fortinet is offering some important features with Fortinet NSE7_SSE_AR-26 exam. These NSE7_SSE_AR-26 Exam Questions features are valid, updated, and real Fortinet NSE7_SSE_AR-26 exam questions, availability of Fortinet NSE7_SSE_AR-26 exam questions in three different formats.
NEW QUESTION # 18
You want FortiGate to use SD-WAN rules to steer local-out traffic. Which two constraints should you consider? (Choose two.)
Answer: C,D
Explanation:
By default, local-out traffic does not use SD-WAN # FortiGate normally sends local-out traffic (e.g., DNS, NTP, FortiGuard updates) directly through its interfaces without applying SD-WAN rules. You must configure each local-out feature individually to use SD-WAN # To steer local-out traffic via SD-WAN, you must explicitly configure the desired local-out features (e.g., DNS, FortiGuard, CAPWAP) to use SD-WAN rules. An operational review should distinguish the rule that matches the traffic from the interface that is ultimately selected. Valid forwarding also depends on destination route eligibility, current member state and the applicable SLA or quality-selection algorithm. A diagnostic showing configured members alone is not conclusive evidence that all those members will carry a particular flow. When troubleshooting, correlate the configured SD-WAN service with diagnose sys sdwan service4, the live session entry and the routing table.
An application signature, an IP route and a health-check result describe different decision stages; treating them as interchangeable can produce incorrect conclusions about the egress interface.
References: https://docs.fortinet.com/document/fortigate/7.6.0/administration-guide/848980
NEW QUESTION # 19
You are planning a new SD-WAN deployment with the following criteria: - Two regions - Most of the traffic is expected to remain within its region - No requirement for inter-region ADVPN To remain within the recommended best practices, which routing protocol should you select for the overlays?
Answer: B
Explanation:
For SD-WAN deployments that span multiple regions-where most traffic is intra-region and there is no requirement for inter-region ADVPN-the best practice is to use IBGP with BGP on loopback interfaces for routing within each region and EBGP between the regions. This approach ensures robust and scalable routing, isolates regional routing domains, and enables policy control at region boundaries. BGP on loopback is preferred for its reliability and flexibility, as it enables peering that is not tied to specific physical interfaces.
EBGP between regions allows each region to maintain independent routing policies and summarization, optimizing performance and manageability. By separating IBGP (intra-region) and EBGP (inter-region), you create a modular architecture that scales easily and simplifies fault isolation and troubleshooting.References:
A deployment should preserve the distinction between the physical or logical WAN underlay, the IPsec overlay and the SD-WAN zone that groups forwarding members. These layers can have different routing and security-policy requirements. The configured architecture must also allow the required traffic paths and failover behavior rather than assuming every available interface is interchangeable.
References: https://docs.fortinet.com/document/fortigate/7.6.0/sd-wan-sd-branch-architecture-for-mssps
/245549/overlay-network-designs
NEW QUESTION # 20
What are three key routing principles of SD-WAN? (Choose three.)
Answer: A,B,C
Explanation:
FortiGate SD-WAN integrates policy-based traffic steering with the traditional routing subsystem. SD-WAN rules do not automatically override routing-table decisions; they operate within the route-selection framework.
Option A is correct. A member selected by an SD-WAN rule must have a valid route toward the destination.
If the selected member cannot reach the destination, FortiGate excludes that member and evaluates another eligible candidate.
Option C is correct. Under default SD-WAN routing behavior, the best route to the destination must point toward an SD-WAN member before SD-WAN service-rule evaluation applies. If the best route points to a non-SD-WAN interface, conventional routing handles the traffic instead.
Option E is correct because a directly connected route can take precedence when it is the best matching route.
FortiGate does not unnecessarily divert locally reachable destinations into SD-WAN processing.
Option B is incorrect because the Internet Service Database supplies application and destination classification information; it does not establish a universal routing-precedence rule above SD-WAN.
Option D is incorrect because a static route does not inherently bypass SD-WAN. Static routes commonly provide reachability through SD-WAN member interfaces.
The fundamental principles are route eligibility, valid member reachability, and preservation of conventional routing decisions outside the SD-WAN domain.
References: Fortinet SD-WAN Architecture for Enterprise - SD-WAN Routing Logic; FortiOS 7.6 Administration Guide - SD-WAN Rules Overview.
NEW QUESTION # 21
Refer to the exhibit. The exhibit shows output of the command diagnose sys sdwan service4 collected on a FortiGate device. The administrator wants to know through which interface FortiGate will steer traffic from local users on subnet 10.0.1.0/255.255.255.192 and with a destination of the social media application Facebook. Based on the exhibits, which two statements are correct? (Choose two.)
Exhibit 1
Answer: C,D
Explanation:
Application-based SD-WAN rules enable intelligent traffic steering. The FortiOS behavior is: " If a flow is identified as belonging to a defined application category (such as social media), FortiGate will match it to the corresponding service rule (rule 2) and route it through the specified interface, such as port2. However, if the application is not recognized during the session setup, the system defaults to load balancing the traffic using the available tunnels according to the policy for unclassified traffic, ensuring continuous connectivity while waiting for application classification. " This guarantees both performance and resilience. An operational review should distinguish the rule that matches the traffic from the interface that is ultimately selected. Valid forwarding also depends on destination route eligibility, current member state and the applicable SLA or quality-selection algorithm. A diagnostic showing configured members alone is not conclusive evidence that all those members will carry a particular flow. When troubleshooting, correlate the configured SD-WAN service with diagnose sys sdwan service4, the live session entry and the routing table. An application signature, an IP route and a health-check result describe different decision stages; treating them as interchangeable can produce incorrect conclusions about the egress interface.
References: https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/125874/application- steering-using-sd-wan-rules
NEW QUESTION # 22
Refer to the exhibit.
Two hub-and-spoke groups are connected through redundant site-to-site IPsec VPNs between Hub 1 and Hub
2.
Which two configuration settings are required for spoke A1 to establish an auto-discovery VPN (ADVPN) shortcut with spoke B2? (Choose two.)
Exhibit - Hub-and-spoke ADVPN topology
Answer: B,D
Explanation:
ADVPN enables dynamic spoke-to-spoke IPsec shortcuts that eliminate unnecessary transit through hub devices after the initial discovery and negotiation process. In this scenario, spokes A1 and B2 belong to separate hub-and-spoke groups, interconnected through redundant IPsec tunnels.
Option A is correct because spoke devices use auto-discovery-receiver on their hub-facing IPsec Phase 1 interfaces. This enables the spokes to receive ADVPN shortcut discovery information needed to establish a direct tunnel to another spoke. Fortinet ' s ADVPN configuration examples explicitly demonstrate this receiver role.
Option D is correct because the interconnected hubs must forward the relevant ADVPN discovery messages across their inter-hub IPsec tunnels. Enabling auto-discovery-forwarder allows discovery signaling to traverse the hub-to-hub connections so that spokes belonging to different regions can discover one another.
Option B reverses the standard spoke and hub discovery roles. The hub normally performs the sender role on its spoke-facing tunnels, whereas the spoke uses the receiver role.
Option C similarly assigns the receiver role to the wrong side of the hub-to-spoke relationship.
The essential distinction is between receiving shortcut discovery at the spokes and forwarding discovery information between the hubs.
References: FortiOS 7.6 Administration Guide - ADVPN and Shortcut Paths; IPsec Phase 1 Interface CLI Reference.
NEW QUESTION # 23
......
The clients at home and abroad strive to buy our NSE7_SSE_AR-26 test materials because they think our products are the best study materials which are designed for preparing the test NSE7_SSE_AR-26 certification. They trust our NSE7_SSE_AR-26 certification guide deeply not only because the high quality and passing rate of our NSE7_SSE_AR-26 qualification test guide but also because our considerate service system. They treat our NSE7_SSE_AR-26 study materials as the magic weapon to get the NSE7_SSE_AR-26 certificate and the meritorious statesman to increase their wages and be promoted.
NSE7_SSE_AR-26 Real Dumps: https://www.dumpexams.com/NSE7_SSE_AR-26-real-answers.html