100-150 Prüfungsvorbereitung, 100-150 Fragenkatalog

BONUS!!! Laden Sie die vollständige Version der Fast2test 100-150 Prüfungsfragen kostenlos herunter: https://drive.google.com/open?id=1Xy4QXjrlpZjO3Ti1cjxbwJdmDlVbvuhQ

Nun ist eine Gesellschaft, die mit den fähigen Leuten überschwemmt. Aber viele Fachleute fehlen trotzdem doch. Beispielsweise fehlen in der IT-Branche Techniker. Und die Cisco 100-150 Zertifizierungsprüfung sit eine Prüfung, die IT-Technik testet. Fast2test ist eine Website, die Ihnen Kenntnise zur Cisco 100-150 Zertifizierungsprüfung liefert.

Cisco 100-150 Prüfungsplan:

Thema	Einzelheiten
Thema 1	Standards and Concepts: Covers foundational networking models, terminology, network types, cloud service models, and common application-layer protocols.
Thema 2	Diagnosing Problems: Covers structured troubleshooting approaches, packet capture with Wireshark, common diagnostic commands, remote access methods, and basic Cisco show commands.
Thema 3	Addressing and Subnet Formats: Covers the distinction between public and private IP addressing, IPv4 subnetting, and IPv6 address and prefix formats.

>> 100-150 Prüfungsvorbereitung <<

100-150 Fragenkatalog & 100-150 Testking

Jede Version der Cisco 100-150 Prüfungsunterlagen von uns hat ihre eigene Überlegenheit. PDF Version hat keine Beschränkung für Anlage, deshalb können Sie irgendwo die Unterlagen lesen. Wenn Sie Internet benutzen können, die Online Test Engine der Cisco 100-150 können Sie sowohl mit Windows, Mac als auch Android, iOS benutzen. Mit Simulations-Software können Sie die Prüfungsumwelt der Cisco 100-150 erfahren und bessere Kenntnisse darüber erwerben. Übrigens, Sie dürfen die Prüfungssoftware irgendwie viele Male installieren.

Cisco Certified Support Technician (CCST) Networking 100-150 Prüfungsfragen mit Lösungen (Q60-Q65):

60. Frage
Evaluate the graphic.

While making a configuration change to Router1, a junior technician accidentally reboots the router.
Which two statements are true about the impact to communication on the network while the router is temporarily offline? (Choose two.)

A. PC-C and PC-D can still communicate with the file server (File-Srv).
B. The file server (File-Srv) can still access the Internet.
C. None of the PCs can access the file server (File-Srv).
D. PC-A and PC-B can still communicate with each other.
E. PC-A, PC-B, PC-C, and PC-D can all still communicate with each other.

Antwort: C,D

Begründung:
Communication between different VLANs requires Router1, so without the router, no PC can reach the file server in VLAN 10. Devices in the same VLAN can still communicate at Layer 2 through the switch, so PC-A and PC-B can still communicate with each other.

61. Frage
Which protocol is used to automatically assign IP addresses and other network configuration parameters to devices on a network?

A. DHCP
B. FTP
C. DNS
D. SNMP

Antwort: A

Begründung:
DHCP dynamically assigns IP addresses, subnet masks, gateways, and DNS servers, simplifying network management and reducing configuration errors compared to manual IP assignment.

62. Frage
Move the MFA factors from the list on the left to their correct examples on the right. You may use each factor once, more than once, or not at all.
Note: You will receive partial credit for each correct selection.

Antwort:

Begründung:

Explanation:
The correct matching of the MFA factors to their examples is as follows:
* Entering a one-time security code sent to your device after logging in: Possession
* Holding your phone to your face to be recognized: Inherence
* Specifying your user name and password to log on to a service: Knowledge Here's why each factor matches the example:
* Possession: This factor is something the user has, like a mobile device. A one-time security code sent to this device falls under this category.
* Inherence: This factor is something the user is, such as a biometric characteristic. Facial recognition using a phone is an example of this factor.
* Knowledge: This factor is something the user knows, like a password or PIN.
Multi-Factor Authentication (MFA) enhances security by requiring two or more of these factors to verify a user's identity before granting access.
* Entering a one-time security code sent to your device after logging in.
* Factor: Possession
* Explanation: This factor relates to something you have, such as a device that receives a security code.
* Holding your phone to your face to be recognized.
* Factor: Inference (typically referred to as Inherence or Biometric)
* Explanation: This factor relates to something you are, such as biometric authentication like facial recognition.
* Specifying your username and password to log on to a service.
* Factor: Knowledge
* Explanation: This factor relates to something you know, such as a username and password.
* Possession Factor: This involves something the user has in their possession. Receiving a one-time security code on a device (e.g., phone) is an example of this.
* Inference Factor (Inherence/Biometric): This involves something inherent to the user, such as biometric verification (e.g., facial recognition or fingerprint scanning).
* Knowledge Factor: This involves something the user knows, such as login credentials (username and password).
References:
* Multi-Factor Authentication (MFA) Explained: MFA Guide
* Understanding Authentication Factors: Authentication Factors

63. Frage
For each statement about bandwidth and throughput, select True or False.
Note: You will receive partial credit for each correct selection.

Antwort:

Begründung:

Explanation:
* Statement 1: Low bandwidth can increase network latency.
* True: Low bandwidth can result in increased network latency because the network may become congested, leading to delays in data transmission.
* Statement 2: High levels of network latency decrease network bandwidth.
* False: High levels of network latency do not decrease the available network bandwidth, but they do affect the perceived performance and throughput of the network.
* Statement 3: You can increase throughput by decreasing network latency.
* True: Decreasing network latency can increase throughput because data can be transmitted more quickly and efficiently without delays.
* Bandwidth vs. Latency: Bandwidth refers to the maximum rate at which data can be transferred over a network path. Latency is the time it takes for a data packet to travel from the source to the destination.
* Low bandwidth can cause network congestion, which can increase latency as packets wait to be transmitted.
* High latency does not reduce the actual bandwidth but can affect the overall performance and efficiency of data transmission.
* Reducing latency can lead to higher throughput because the network can handle more data in a given period without delays.
References:
* Network Performance Metrics: Cisco Network Performance
* Understanding Bandwidth and Latency: Bandwidth vs. Latency

64. Frage
Evaluate the graphic.

While making a configuration change to Router1, a junior technician accidentally reboots the router.
Which two statements correctly describe the impact on network communication while Router1 is temporarily offline? (Choose two.)

A. PC-A and PC-B can continue communicating with one another.
B. PC-C and PC-D can still reach the file server (File-Srv).
C. The file server (File-Srv) becomes unreachable from all four PCs.
D. The file server (File-Srv) can still reach the internet.
E. All four PCs can continue communicating with one another.

Antwort: A,C

Begründung:
Correct Answers: B and C
The network diagram illustrates three distinct VLANs connected through Router1:
* VLAN 100: PC-A and PC-B - 172.100.0.0/16
* VLAN 110: PC-C and PC-D - 172.110.0.0/16
* VLAN 10: File-Srv - 10.0.0.5/16
Router1 provides Layer 3 routing between these VLANs and connectivity to the internet.
When Router1 reboots, inter-VLAN routing becomes temporarily unavailable. However, the switches can continue forwarding Ethernet frames between devices belonging to the same VLAN.
B). Correct: The file server belongs to VLAN 10, whereas the four PCs belong to VLANs 100 and 110.
Without Router1, none of the PCs can reach the file server through the illustrated network.
C). Correct: PC-A and PC-B belong to VLAN 100 and are connected to Switch1. They can continue communicating directly through Layer 2 switching without requiring Router1.
Why the other options are incorrect:
A). PC-C and PC-D require inter-VLAN routing to reach the file server.
D). Communication between VLANs 100 and 110 requires a functioning Layer 3 routing device.
E). The file server cannot access the internet because Router1 provides its upstream routing path.
Cisco ' s inter-VLAN routing documentation confirms that same-VLAN communication can occur through Layer 2 switching, while communication between different VLANs requires Layer 3 routing.
References:
Cisco Certified Support Technician Networking (100-150) - Network Infrastructure, VLANs, Switching, and Routing.
Cisco - Configure Inter-VLAN Routing with Catalyst Switches.
Cisco IOS XE LAN and WAN Configuration Guide - Configuring Routing Between VLANs.
Cisco - VLAN Roles, Layer 2 Communication and Layer 3 Routing.

65. Frage
......

Wollen Sie an Cisco 100-150 Zertifizierungsprüfung teilnehmen? Sorgen Sie sich um diese Prüfung? Wünschen Sie sich an der 100-150 Prüfung melden aber Fürchten Sie Misserfolg an dieser Prüfung? Das macht nichts, melden Sie getrost an. Wenn Sie Fast2test Prüfungsunterlagen benutzen, sind keine Probleme in Ihrer Prüfung vorhanden. Obwohl Sie keine Zuversicht dieser Prüfung haben, können Sie einmal diese Prüfung bestehen, wenn Sie 100-150 Dumps von Fast2test benutzen. Glauben Sie nicht? Kommen Sie bitte zu Fast2test und Informieren Sie sich. Außerdem können Sie einen Teil der Cisco 100-150 Dumps probieren. Damit können Sie finden, dass die Prüfungsunterlagen die Garantie für den Erfolg der Cisco 100-150 Prüfung sind.

100-150 Fragenkatalog: https://de.fast2test.com/100-150-premium-file.html

P.S. Kostenlose und neue 100-150 Prüfungsfragen sind auf Google Drive freigegeben von Fast2test verfügbar: https://drive.google.com/open?id=1Xy4QXjrlpZjO3Ti1cjxbwJdmDlVbvuhQ