2026 ITDumpsKR 최신 ClaimCenter-Business-Analysts PDF 버전 시험 문제집과 ClaimCenter-Business-Analysts 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=1taHnGT_dX5rcIDqBcj4gdj1Zo9JR5xdk
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. Guidewire인증 ClaimCenter-Business-Analysts시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITDumpsKR는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITDumpsKR의Guidewire인증 ClaimCenter-Business-Analysts덤프로 자격증을 편하게 취득하는게 어떨가요?
| Section | Objectives |
|---|---|
| ClaimCenter Financials & Operations | - Claim Lifecycle Management
|
| Guidewire InsuranceSuite Fundamentals | - Integration & Configuration
|
| Behavior Driven Development (BDD) | - BDD in Guidewire
|
| Quality Assurance & Business Analysis Fundamentals | - Quality Analyst Basics
|
>> ClaimCenter-Business-Analysts유효한 덤프 <<
ITDumpsKR에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Guidewire인증ClaimCenter-Business-Analysts시험을 패스할 수 있을 자료 등을 만들었습니다, ITDumpsKR 에서는 일년무료 업뎃을 제공하며, ITDumpsKR 의 덤프들은 모두 높은 정확도를 자랑합니다. ITDumpsKR 선택함으로 여러분이Guidewire인증ClaimCenter-Business-Analysts시험에 대한 부담은 사라질 것입니다.
질문 # 39
An Adjuster at Succeed Insurance creates a check with a partial payment of $1,200 for medical expenses payable to a claimant who was injured in a collision. The check has completed the following processing steps:
. The payment exceeded the Adjuster's authority limits, changing the status to Pending Approval.
. The Adjuster's supervisor reviewed and approved the payment, changing the status to Awaiting Submission.
. A batch process sent the check to the external check processing system, changing the status to Requested when ClaimCenter received an update from the external system.
The Adjuster received new information indicating that the check amount should be reduced to $950.
Which action should the Adjuster take?
정답：B
설명：
250 to 350 words From Exact Extract of Guidewire ClaimCenter Business Analyst documentation:
In the lifecycle of a check within Guidewire ClaimCenter, the Requested status indicates that the payment instruction has been successfully handed off to the downstream check writing or electronic funds transfer system. Once a check reaches this status, it is considered a committed financial transaction and is locked from further editing.
* Why Option A is incorrect:You cannot edit a check that is in "Requested" status. The "Edit" button will likely be disabled or the fields locked because the data has already left the system.
* Why Option C is incorrect:A "Stop" payment is typically reserved for scenarios where a physical check has been lost, stolen, or destroyedafterit was printed and mailed. While a Stop Payment does prevent the check from being cashed, it is a specific banking process often involving fees.
* Why Option D is Correct:To correct an administrative error (such as the wrong amount) for a check that has been processed but not yet negotiated (cashed), the standard procedure is toVoidthe check.
Voiding the check in ClaimCenter performs two critical functions:
* It reverses the financial T-accounts (reserves and payments) associated with the transaction, ensuring the claim financials are accurate.
* It updates the status to "Voided," effectively cancelling the payment in the system.
After voiding the incorrect check ($1,200), the Adjuster must then create anew checkfor the correct amount ($950) to pay the claimant.
질문 # 40
Which two best practices should a Business Analyst (BA) follow to be prepared for a Requirements Workshop? (Choose two.)
정답：A,B
설명：
Preparation is key to a successful Requirements Workshop (or Elaboration Workshop). The BA must enter the room with a clear understanding of the project scope and the tool's capabilities.
* Review Notes from Inception (B):TheInception Phasedefines the high-level scope, vision, and business objectives. Reviewing these notes ensures the BA understands the boundaries of the discussion (e.g., "We are doing Auto Hail damage, but not Property Hail damage yet") and the strategic goals defined by the sponsors.
* Review Base Product Functionality (C):To effectively lead the session and recommend solutions (as seen in Question 22), the BA must be familiar with how ClaimCenter handles the specific topic (e.g., Check Wizards, Coverage Verification) out-of-the-box. This allows the BA to demo standard features during the workshop to drive "Fit-to-Standard" discussions rather than starting from a blank sheet of paper.
* Why not A, D, or E?Inviting users (A) and setting agendas (E) are logistical tasks often handled by the Project Manager or shared; they are not "personal preparation" of knowledge. Acceptance Criteria (D) are typically writtenduringorafterthe workshop, not reviewed beforehand (unless refining an existing story).
질문 # 41
What is a reason to assign a unique identification number to each User Story Card in ClaimCenter implementation projects?
정답：C
설명：
In Guidewire implementation methodology (such as SurePath), traceability and organization are maintained through strict naming conventions.
* Naming Convention (Option C):A unique identification number is assigned to every User Story Card to create a consistent naming structure:Product - Theme - Subtheme - ID. (For example: CC - FNOL - Vehicle - 001).
* Purpose:This convention allows Business Analysts, Developers, and QA testers to easily reference, search, and trace requirements across different tools (e.g., from the Story Card in Excel/Jira to the code in Studio and the test cases in the testing suite).
* Why not A, B, or D?Time estimation (A) uses "Story Points," not the ID. Burndown charts (B) track velocity/points, not criteria IDs. Backlogs (D) are organized byBusiness Value/Priority, not just numerically by ID.
질문 # 42
Succeed Insurance requires that a new 'Driver under 18?' field be added to the vehicle incident screen for personal auto claims to indicate whether or not the driver of the vehicle was a minor when the loss occurred.
The field will be set by calculating the driver's age using the date of loss and the driver's date of birth.
There are two validation requirements:
* The field must be set if the 'Date of Birth' field for the driver is not null.
* No payments can be made for collision exposures if the 'Date of Birth' field for the driver of the vehicle is null.
A Business Analyst (BA) documents the validation requirements in the validation tab of the User Story Card
'Adjudicate - Update Maintain Vehicle Incident for Personal Auto Claims' as shown in the exhibit.
What information in the two validation examples is either missing or incorrectly documented? (Choose two.)
정답：A,B
설명：
The User Story Card exhibit contains several documentation errors when compared to standard Guidewire requirements gathering best practices and the specific scenario provided.
* Missing Requirement Number and Logic Gap (Option C):
* Traceability:In the second row of the exhibit (the payment validation rule), the "Requirement Number" column is completely blank. Traceability back to the original requirements document is mandatory for all entries.
* Logic Precision:The requirement explicitly states that the rule applies to"personal auto claims"
. However, the logic documented in the "Rules" column (If Exposure Type = VehicleDamage Then Block...) doesnotcheck the Policy Type. It relies solely on the Exposure Type, which could exist on Commercial Auto policies as well. To accurately reflect the business requirement, the condition If PolicyType = Personal Auto must be added (similar to how it was done in the first row).
* Missing DV/LV Context for Validation (Option D):
* UI Anchoring:The second requirement is a validation rule that triggers an error ("Driver's Date of Birth is required..."). For the system to highlight the specific field on the screen (the "Driver Date of Birth" widget) when the error occurs, the rule must be associated with the specificDetail View (DV)orList View (LV)where that field resides (e.g., VehicleIncidentDV). The exhibit lists
"Not Applicable" in the "Name of DV or LV" column. This is incorrect because providing the DV name ensures the error message is displayed contextually next to the field rather than as a generic page-level error, improving the user experience.
Why other options are incorrect:
* Option A:The LOB column is used for filtering, reporting, and release management. Even if the rule logic checks the policy type, the LOB column is required metadata and should not be removed.
* Option B:While the first requirement (the calculation) lacks a DV name (which it should have), it is a Business Rule(assignment), not a validation. Therefore, it doesnotgenerate an error or warning message for the user, so the second part of Option B is incorrect.
* Option E:The "Rules" column is exactly where the calculation logic (Date of Loss - Date of Birth) belongs. The developer needs this information to implement the automation.
질문 # 43
A claim for an auto accident in California has been assigned to an insurance Adjuster in the Midwest region for investigation and processing. The claim has been flagged as "Low Complexity" in ClaimCenter. The Adjuster has an authority limit for total reserves of $30,000 and has created reserves totaling $35,000.
What is the correct approval routing for this transaction?
정답：C
설명：
Based on theGuidewire ClaimCenter Financials and Authority Limitsdocumentation, the correct behavior for this scenario is determined by the strict enforcement ofAuthority Limits, regardless of claim complexity or geographic region.
In ClaimCenter, every user is assigned specific authority limits for various financial transactions, including reserves, payments, and recovery reserves. These limits are absolute constraints designed to control financial exposure. In the scenario provided, the Adjuster attempted to set a reserve of$35,000, which exceeds their authorized limit of$30,000.
When a user submits a financial transaction that exceeds their pre-configured authority limit, ClaimCenter automatically triggers anApproval Workflow. The system validates the transaction amount against the user's limit at the time of submission. Since the limit is breached, the transaction is not committed immediately to the database as "Submitted"; instead, it enters a"Pending Approval"status.
Routing Logic:
The standard, out-of-the-box approval routing logic in ClaimCenter follows the Group Hierarchy.
* The system identifies the group to which the Adjuster belongs.
* It creates anApproval Activity.
* This activity is assigned to theSupervisorof that group.
The Supervisor must then review the transaction. If the Supervisor has sufficient authority (greater than
$35,000), they can approve it. If the Supervisor also lacks sufficient authority, they must still "approve" it to escalate the request further up the hierarchy totheirmanager, until it reaches a user with sufficient limits.
Why other options are incorrect:
* A (Complexity):Claim complexity flags (e.g., "Low Complexity") are often used forAssignmentrules (Segment-based assignment) or straight-through processing ofdocuments, but they do not override Financial Authoritycontrols. A low-complexity claim still requires financial oversight if the dollar amount is high.
* B (Peer Approval):Approval routing is hierarchical, not peer-to-peer. It does not look for "any" team member; it looks specifically for the defined Supervisor.
* C (Region):The region mismatch might trigger an assignment rule or a validation warning depending on configuration, but the specific trigger for theapprovalhere is purely the financial discrepancy ($35k
> $30k), not the geography.
질문 # 44
......
ITDumpsKR의 Guidewire ClaimCenter-Business-Analysts 덤프로 시험을 준비하면Guidewire ClaimCenter-Business-Analysts시험패스를 예약한것과 같습니다. 가장 최근 출제된Guidewire ClaimCenter-Business-Analysts시험문제를 바탕으로 만들어진 적중율 최고인 덤프로서 간단한 시험패스는 더는 꿈이 아닙니다. 덤프는 pdf파일과 온라인서비스로 되어있는데 pdf버전은 출력가능하고 온라인버전은 휴대폰에서도 작동가능합니다.
ClaimCenter-Business-Analysts합격보장 가능 덤프자료: https://www.itdumpskr.com/ClaimCenter-Business-Analysts-exam.html
참고: ITDumpsKR에서 Google Drive로 공유하는 무료 2026 Guidewire ClaimCenter-Business-Analysts 시험 문제집이 있습니다: https://drive.google.com/open?id=1taHnGT_dX5rcIDqBcj4gdj1Zo9JR5xdk