It is well known that certificates are not versatile, but without a NSE6_EDR_AD-7.0 certification you are a little inferior to the same competitors in many ways. Compared with the people who have the same experience, you will have the different result and treatment if you have a NSE6_EDR_AD-7.0 Certification. Without doubt, you will get a higher salary if you have a NSE6_EDR_AD-7.0 certification or you can enter into a bigger company. And our NSE6_EDR_AD-7.0 exam materials can make your dream come true.
| Section | Objectives |
|---|---|
| Topic 1: Installation and Deployment | - Agent deployment and onboarding - Server and console installation requirements |
| Topic 2: FortiEDR Architecture and Components | - System architecture and deployment models - FortiEDR components overview (agents, management console, collectors) |
| Topic 3: Forensics and Investigation | - Endpoint investigation workflows - Event analysis and telemetry review |
| Topic 4: Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| Topic 5: System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Topic 6: Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
>> NSE6_EDR_AD-7.0 Exam Brain Dumps <<
Before you buy our NSE6_EDR_AD-7.0 study questions you can have a free download and tryout and you can have an understanding of our product by visiting our pages of our product on the website. The pages of our NSE6_EDR_AD-7.0 guide torrent provide the demo and you can understand part of our titles and the form of our software. On the pages of our NSE6_EDR_AD-7.0 exam torrent you can see the version of the product, the updated time, the quantity of the questions and answers, the characteristics and merits of the product, the price of the product and the discounts. The pages also list the details and the guarantee of our NSE6_EDR_AD-7.0 Exam Torrent, the methods to contact us, the evaluations of the past client on our product, the related exams and other information about our NSE6_EDR_AD-7.0 guide torrent. So before your purchase you can have an understanding of our product and then decide whether to buy our NSE6_EDR_AD-7.0 study questions or not.
NEW QUESTION # 28
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
NEW QUESTION # 29
Refer to the exhibits.
What happens when the net user command runs on an endpoint? (Choose one answer)
Answer: D
Explanation:
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========
NEW QUESTION # 30
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 31
You discovered that a newly installed collector does not display on the Inventory tab in the central manager.
Which two troubleshooting steps must you perform? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide has a specific troubleshooting section named "A FortiEDR Collector does not display in the INVENTORY tab." It states that after a Collector is first launched, it registers with the FortiEDR Central Manager and appears in the Inventory tab. If it does not appear, the first checks are to confirm that the device where the Collector is installed is powered on and has Internet connectivity, and to validate that ports 8081 and 555 are available and not blocked by another third-party product.
Option B is therefore correct in the exam sense because ports 8081 and 555 must be open for FortiEDR communication. More precisely, the Collector communicates with the Aggregator on port 8081 and the Core on port 555 , not directly to the Central Manager in every architecture. The option wording says "between the collector and the central manager," which is technically loose, but the required troubleshooting item is still the port availability.
Option C is also correct because the same guide says to check that the endpoint is powered on and connected.
In practical FortiEDR troubleshooting, this includes confirming the FortiEDR Collector service/driver are running on the endpoint; otherwise the Collector cannot register or report health.
Option A is not listed in the FortiEDR guide as a required step for this issue. Option D is not the best answer because the guide says logs are generally retrieved when Fortinet Support requests them, and Collector logs can only be exported for Collectors in Running status; a newly installed Collector that does not appear in Inventory cannot normally be selected from Central Manager for log export.
NEW QUESTION # 32
Refer to the exhibit:
You are asked to block applications based on hash attributes. Which two factors must you consider when applying the hash value? (Choose two answers)
Answer: A,D
Explanation:
The FortiEDR 7.0.0 Administration Guide states that when manually adding applications to be blocked, you can define the application using Hash or using any combination of File Name / Path / Signer attributes. This means hashes can be used independently and do not require filename, path, or signer attributes.
The guide also states that each hash is a unique identifier of an individual application, and the exhibit itself shows the hash field note: "SHA-1 or SHA-2 or MD5." Therefore, the hash must use a supported hash format, making D correct.
For multiple hash entries, the uploaded guide text says they must be comma separated , while the exhibit note says "You can enter multiple hashes comma separated." So the technically exact guide wording supports comma separation, not line separation. However, given your answer choices, A is clearly trying to test the requirement that multiple hashes must be separated correctly. The option wording says "line- separated," which is not exact against the guide; the better wording would be comma-separated . Since no
"comma-separated" option is provided, A is the intended separation-related answer, but the wording is flawed.
Option B is definitely wrong because hash mode is an alternative to attributes. Option C is also not the best answer because, although each hash uniquely identifies a file/application variant, the operational requirement is not that "hashes must be unique to each application" in the way the option implies. Hashes may represent different variants of the same application.
NEW QUESTION # 33
......
With our numerous advantages of our NSE6_EDR_AD-7.0 latest questions and service, what are you hesitating for? Our company always serves our clients with professional and precise attitudes, and we know that your satisfaction is the most important thing for us. We always aim to help you pass the NSE6_EDR_AD-7.0 Exam smoothly and sincerely hope that all of our candidates can enjoy the tremendous benefit of our NSE6_EDR_AD-7.0 exam material, which might lead you to a better future!
Exam NSE6_EDR_AD-7.0 Simulator Online: https://www.validvce.com/NSE6_EDR_AD-7.0-exam-collection.html