KoreaDumps에서는 IT인증시험에 관한 모든 덤프를 제공해드립니다. 우선 시험센터에서 정확한 시험코드를 확인하시고 그 코드와 동일한 코드로 되어있는 덤프를 구매하셔서 덤프에 있는 문제와 답을 기억하시면 시험을 쉽게 패스하실수 있습니다.API-SIEE시험은 IT인증시험중에서 많은 인기를 가지고 있는 시험입니다.API-SIEE시험을 패스하여 자격증을 취득하시면 취업이나 승진에 많은 가산점이 되어드릴것입니다.
| Certification Vendor: | American Petroleum Institute (API) |
|---|---|
| Exam Name: | Source Inspector Electrical Equipment |
| Exam Number: | API-SIEE |
| Passing Score: | Scaled score (approx. 70-75%, official value not disclosed) |
| Real Exam Qty: | 110 (100 scored, 10 unscored pretest) |
| Exam Duration: | 195 minutes |
| Related Certifications: | API-SIRE (Source Inspector Rotating Equipment) API-SIPE (Source Inspector Pressure Equipment) |
| Exam Format: | Closed-book exam, Multiple-choice questions |
| Certificate Validity Period: | 3 years |
| Available Languages: | English |
| Exam Price: | $495 - $695 USD (varies by membership status and region) |
| Recommended Training: | API SIEE Study Guide & Body of Knowledge API Training Courses |
| Exam Registration: | Pearson VUE Testing API Official Certification Portal |
| Sample Questions: | API API-SIEE Sample Questions |
| Exam Way: | Computer-based; available at test centers or remote proctored online |
| Pre Condition: | Minimum experience: 2 years electrical inspection OR 4 years electrical engineering/technology OR equivalent education + experience; prequalification required |
| Official Syllabus URL: | https://www.api.org/products-and-services/individual-certification-programs/certifications/apisiee |
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. API인증 API-SIEE시험은 인기자격증을 취득하는데 필요한 시험과목입니다. KoreaDumps는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. KoreaDumps의API인증 API-SIEE덤프로 자격증을 편하게 취득하는게 어떨가요?
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
질문 # 26
According to API 541, prior to mechanical running test, each mounting foot shall be checked for "soft feet." How is this check conducted?
정답：D
설명：
The correct answer isB. In large motor inspection practice underAPI 541, asoft footcheck is performed to confirm that all motor mounting feet sit properly on the base and that tightening or loosening the hold-down bolts does not distort the motor frame. The accepted method is to first have the mounting bolts tightened, then place adial indicator verticallyat the foot,zero the indicator, and observe the movement when the bolt torque isrelieved or loosened. If the foot lifts or the frame shifts beyond the permitted tolerance, the condition indicates soft foot and must be corrected before the mechanical running test.
This matters because soft foot can introduce frame strain, misalignment, elevated vibration, bearing loading, and unreliable mechanical test results. In source inspection, the purpose is not merely to verify bolt tightness or visible fit-up, but to confirm that the machine is mounted without distortion under actual installed clamping conditions. Option A may reveal a gap but does not fully assess frame movement under bolt load. Option C reverses the usual verification sequence. Option D is inadequate because torque and visual appearance alone do not confirm absence of soft foot.
질문 # 27
As part of a purchase order, what type of documents typically supplement industry standards?
정답：A
설명：
The correct answer isDbecause, in source inspection and procurement practice,client standardsare commonly included in or referenced by thepurchase orderto supplement generalindustry standards. Industry standards such as API, IEEE, NEMA, IEC, and NFPA establish broad technical requirements, but they often do not capture all of the purchaser's project-specific expectations. Client standards fill that gap by adding requirements for materials, testing, documentation, preservation, coating, marking, data submission, inspection hold points, and deviations or concessions.
This is a key concept in API-aligned source inspection. The source inspector does not verify equipment only against generic published standards. The inspector must verify conformance to thepurchase order, project specifications, approved drawings, applicable codes and standards, and purchaser-specific requirements. In that framework, client standards are a normal supplement to industry standards. The other options are less appropriate.Supplier quality standardsandmanufacturing standardsare usually internal vendor documents, whilematerial test reportsare records of compliance, not governing standards. Therefore, the documents that typically supplement industry standards as part of a purchase order areclient standards, makingoption Dthe verified answer.
질문 # 28
According to ANSI/NETA/ATS, when performing a dielectric withstand test on each bus section, the test voltage shall be applied for how long?
정답：A
설명：
The correct answer isB. UnderANSI/NETA/ATSpractices, adielectric withstand teston eachbus sectionis typically performed by applying the specified test voltage forone minute. This one-minute duration is the standard acceptance interval used to demonstrate that the bus insulation system can safely withstand the prescribed overvoltage without breakdown, flashover, or unacceptable leakage. It provides enough time to reveal insulation weakness while remaining within the intended non-routine high-potential test method for acceptance testing.
From a source inspection perspective, this matters because switchgear bus insulation integrity is a critical verification point during factory testing and final quality surveillance. The inspector is expected to confirm that the correct test method, voltage level, duration, and acceptance criteria are used and properly recorded in the manufacturer's test documentation. The API Guide for Source Inspection and Quality Surveillance of Electrical Equipment includesswitchgearsamong the major covered equipment categories and emphasizes verification of tests, records, and compliance with applicable standards during source inspection and surveillance. Therefore, for a dielectric withstand test on each bus section, the specified voltage is applied forone minute, makingoption Bthe verified answer.
질문 # 29
According to NEMA ICS 2, a provision for pad locking shall be provided:
정답：A
설명：
The correct answer isB. UnderNEMA ICS 2for motor controllers and combination starters, the required provision forpadlockingis associated with theexternal operating handle. This arrangement allows the disconnecting means or operating mechanism to be secured in the desired position, typically for safety isolation and lockout purposes during maintenance or inspection. It is a functional safety feature tied directly to operation of the controller, not merely to enclosure access.
The other options are not the standard requirement in this context. Padlocking thedoor,wireway, orrear doormay be used in some installations for security or restricted access, but those are not the specific NEMA ICS 2 provisions identified for the controller operating mechanism itself. The standard intent is to ensure that the operating handle can be locked so the equipment cannot be unintentionally operated while personnel are working on or near it.
From an API source inspection perspective, this falls under verification ofMCC construction details, safety features, interlocks, and compliance with applicable referenced standardsduring shop inspection and quality surveillance. Therefore, the correct answer ison the external operating handle, which makesoption Bthe verified answer.
질문 # 30
Which of the following is a typical topic for the pre-inspection meeting prior to the start of fabrication?
정답：B
질문 # 31
......
API-SIEE퍼펙트 덤프 최신 샘플: https://www.koreadumps.com/API-SIEE_exam-braindumps.html