Exam JN0-650 Fees, New JN0-650 Exam Notes

What's more, part of that GuideTorrent JN0-650 dumps now are free: https://drive.google.com/open?id=1a0D5AjLxQNtby1ktI8cdnKDjWLC7jrl_

JN0-650 exam certification is considered as a standard in measuring your professional skills in your industry. Besides, those possessing the Juniper JN0-650 certification are more likely to receive higher salaries. So it is very necessary to get JN0-650 certification. Here, GuideTorrent JN0-650 free pdf download can give you some reference. First, you should have preview about the content of JN0-650 real test. Juniper JN0-650 contains the comprehensive contents with explanations where is available. With the assist of JN0-650 training material, you will get success.

Juniper JN0-650 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: High Availability	20%	- Non-Stop Routing (NSR) - Graceful Routing Engine Switchover (GRES) - Virtual Chassis (VC) and Virtual Chassis Fabric (VCF) - Bidirectional Forwarding Detection (BFD) - Non-Stop Bridging (NSB) - IP Surveillance and Multicast RP - In-Service Software Upgrade (ISSU)
Topic 2: Network Optimization and Monitoring	15%	- OpenConfig and YANG - sFlow and Port Mirroring for traffic analysis - Class of Service (CoS) — schedulers, drop profiles, rewrite rules - Junos Analytics and Streaming Telemetry - Simple Network Management Protocol (SNMP)
Topic 3: Layer 2 Switching	15%	- Spanning Tree Protocols (STP, RSTP, MSTP) - VLANs and VLAN Trunking Protocol (VTP) - Link Aggregation (LACP) - Layer 2 Forwarding and MAC Table Management - BPDU Protection, Loop Protection
Topic 4: Services	15%	- DHCP Relay and Snooping - DNS Relay - Quality of Service (QoS) — classification, policing, shaping, queuing - Firewall Filters (ACLs) and Policers
Topic 5: Layer 3 Routing	20%	- Policy-Based Routing - IS-IS (single area, multi-area) - Load Balancing and ECMP - BGP (iBGP, eBGP, route reflectors, confederations) - Route Redistribution and Route Filtering - OSPF (Multi-area, LSA types, SPF calculation)
Topic 6: Security and Automation	15%	- MACsec (Encryption at Layer 2) - 802.1X (Port-Based Network Access Control) - Interactive CLI and scripts - Ansible and Jinja2 templating - Zero Touch Provisioning (ZTP) - Storm Control and Port Security - Junos PyFMT (Python-based automation)

>> Exam JN0-650 Fees <<

100% Pass Juniper - JN0-650 –High Pass-Rate Exam Fees

Our JN0-650 free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our JN0-650 real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing Valid JN0-650 Exam Pdf. Our JN0-650 dumps torrent contains everything you want to solve the challenge of real exam.

Juniper Enterprise Routing and Switching, Professional (JNCIP-ENT) Sample Questions (Q64-Q69):

NEW QUESTION # 64
You have a workstation and an IP phone that connect to the same physical port on your Juniper switch.
Which two statements are true? (Choose two.)

A. Different CoS properties can be configured for the voice traffic.
B. The traffic from the phone and workstation will be treated the same.
C. LLDP can be used to auto discover the phone properties.
D. The phone can program the VLAN on the switch.

Answer: A,C

NEW QUESTION # 65
Which two options are MAC limit actions? (Choose two.)

A. forwarding-class
B. drop
C. log
D. tcp-reset

Answer: B,C

NEW QUESTION # 66
Exhibit

Referring to the exhibit, what will enable active routes from both peers?

A. Configure neighbor 10.10.20.2 multipath under the ext-peers hierarchy.
B. Configure multipath under the ext-peers hierarchy
C. Configure neighbor 172.16.1.1 under the ext-peers hierarchy.
D. Configure neighbor 172.16.1.1 multipath under the ext-peers hierarchy.

Answer: B

Explanation:
The exhibit shows router1 (AS 65001) connected to router2 (AS 65002) via two parallel physical links. The show bgp summary output indicates that sessions are established with two neighbors: 10.10.10.1 and
10.10.20.1. Currently, for the second neighbor (10.10.20.1), there are 0 active routes despite having 4 accepted routes, which indicates that BGP has selected only one "best path" via the first neighbor for forwarding.
* BGP Best Path Selection: By default, BGP only selects a single best path for any given destination prefix and installs that one path into the forwarding table. In a topology with parallel links to the same AS, this leads to underutilization of available bandwidth.
* Multipath Solution (Option B): To enable active routes from both peers and allow for load-balancing (ECMP) across both links, you must enable the multipath feature.
* When the multipath statement is configured under the protocols bgp group ext-peers hierarchy, it tells Junos OS to install multiple equal-cost BGP paths into the routing table and subsequent forwarding table.
* Since both neighbors belong to the same peer group (ext-peers) and the same AS (65002), configuring multipath at the group level will apply to both sessions, allowing paths from both neighbors to be marked as "active".
* Incorrect Options:
* Option A: 172.16.1.1 is the loopback address of router2. The exhibit shows peering is currently done using physical interface addresses (10.10.10.1 and 10.10.20.1), so this address is irrelevant to the current active sessions.
* Option C: Configuring the neighbor address alone without the multipath parameter will not change the best-path selection behavior.
* Option D: 10.10.20.2 is the local interface IP of router1, not the neighbor's IP. BGP multipath must be configured to point to remote peer paths.
Configuration Example for Junos OS 24.4: To implement this, apply the following command: set protocols bgp group ext-peers multipath

NEW QUESTION # 67
Remote branches connect to the corporate WAN through access switches. The access switches connect to access ports on the WAN distribution switch, as shown in the exhibit. L2PT has previously been configured on the tunnel Layer 2 traffic across the WAN.
You decide to move the L2PT tunnel endpoints to the access switches.
When you apply the L2PT configuration to the access switches, the ports that connect the access switches to the distribution switch shut down.

Which action would solve this problem?

A. Configure a GRE tunnel to encapsulate the L2PT traffic across the WAN.
B. Disable the BPDU block function on the access switches.
C. Configure the links between the access switches and the distribution switch as a trunk port.
D. Disable the BPDU block function on the distribution switch.

Answer: C

NEW QUESTION # 68
Referring to Spanning Tree Protocol, what is the function of loop protection?

A. It introduces a time-to-live in the BPDUs.
B. It prevents a port from entering forwarding state when BPDUs are not detected on that port.
C. It sets a port to forwarding state when BPDUs are not detected on that port.
D. It sets a port to blocking state when BPDUs are detected on that port.

Answer: B

NEW QUESTION # 69
......

The data that come up with our customers who have bought our JN0-650 actual exam and provided their scores show that our high pass rate of our JN0-650 exam questions is 98% to 100%. This is hard to find and compare with in the market. And numerous enthusiastic feedbacks from our worthy clients give high praises not only on our JN0-650 study torrent, but also on our sincere and helpful 24 hours customer services online. All of these prove that we are the first-class vendor in this career and have authority to ensure your success in your first try on JN0-650 exam.

New JN0-650 Exam Notes: https://www.guidetorrent.com/JN0-650-pdf-free-download.html

BTW, DOWNLOAD part of GuideTorrent JN0-650 dumps from Cloud Storage: https://drive.google.com/open?id=1a0D5AjLxQNtby1ktI8cdnKDjWLC7jrl_