DOWNLOAD the newest Prep4pass SRAN-Radio-Network-Performance-Optimization PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1JdeU_dC7eFmZJIUC8Klh97bKBn9ihZPo
Our SRAN-Radio-Network-Performance-Optimization learning materials are known for instant download. You can get the download link and password within ten minutes after purchasing, therefore you can start your learning as quickly as possible. Besides, SRAN-Radio-Network-Performance-Optimization exam dumps contain most of knowledge points of the exam, and it will be enough for you to pass the exam, and in the process of practicing SRAN-Radio-Network-Performance-Optimization Exam Dumps, your professional ability will also be improved. We offer you free update for 365 days after purchasing. The latest version for SRAN-Radio-Network-Performance-Optimization training materials will be sent to your email automatically.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Radio Network Performance Monitoring | 20-25% | - Real-time network monitoring techniques - Threshold configuration and alerting - KPI definition and measurement - Performance monitoring tools and dashboards - Performance data collection and analysis |
| Topic 2: SRAN Architecture and Fundamentals | 15-20% | - Radio access concepts and principles - Single RAN integration principles - SRAN solution components and functions - SRAN network architecture overview |
| Topic 3: Radio Network Optimization Techniques | 25-30% | - Parameter tuning best practices - Load balancing techniques - Capacity optimization strategies - Handover optimization - Interference analysis and mitigation - Coverage optimization methods |
| Topic 4: SRAN Optimization Tools and Reports | 10-15% | - Automated optimization features - Nokia NetAct and performance tools - Report generation and interpretation - Configuration management for optimization |
| Topic 5: Performance Troubleshooting | 20-25% | - Troubleshooting tools utilization - Network failure identification and resolution - Common performance issues diagnosis - Optimization case studies - Root cause analysis methodologies |
>> SRAN-Radio-Network-Performance-Optimization Exam Introduction <<
Our company has done the research of the SRAN-Radio-Network-Performance-Optimization study material for several years, and the experts and professors from our company have created the famous SRAN-Radio-Network-Performance-Optimization learning dumps for all customers. We believe our products will meet all demand of all customers. If you long to pass the SRAN-Radio-Network-Performance-Optimization Exam and get the certification successfully, you will not find the better choice than our SRAN-Radio-Network-Performance-Optimization preparation questions. You can have a try to check it out!
NEW QUESTION # 30
Which of the following statements about CBRA , or contention-based random access , is correct?
Answer: D
Explanation:
The correct answer is B .
In contention-based random access , the UE chooses a random access preamble by itself from a configured pool of available contention-based preambles. This is typically used when the UE does not yet have a dedicated connection or when the network has not assigned a dedicated preamble.
Because multiple UEs may choose the same preamble at the same time, preamble collision is possible . That is why CBRA requires a contention resolution step.
Option C describes contention-free random access , not CBRA. In contention-free random access, the network assigns a dedicated preamble to the UE, so collision risk is avoided and contention resolution is not required.
Option A is not the correct CBRA principle being tested. RACH false detection can be a receiver/design issue, but it does not define the CBRA procedure.
Option D describes a possible NSA signaling behavior around access failure handling, but it is not the core correct definition of CBRA.
Therefore, the correct CBRA statement is:
The UE autonomously selects a preamble from the configured range and starts the random access procedure.
NEW QUESTION # 31
The slice type SST value for Extreme Broadband is typically:
Answer: A
Explanation:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
NEW QUESTION # 32
Choose the correct statement from the options below.
Answer: B
Explanation:
The correct answer is B .
Beamforming is mainly about shaping and directing radio energy toward a UE or a target area. It improves coverage, SINR, and cell-edge performance by focusing the transmitted or received signal in a specific direction.
MIMO , or Multiple Input Multiple Output , uses multiple antenna paths to improve throughput, reliability, and spectral efficiency. MIMO can be used for spatial multiplexing, diversity, or beamforming depending on the antenna system and radio configuration.
Option A is incorrect because beamforming and MIMO are related but not the same.
Option C reverses the definitions.
Option D is incorrect because beamforming and MIMO are commonly used together, especially in Massive MIMO systems.
So the correct statement is:
Beamforming focuses on directing the signal, while MIMO focuses on utilizing multiple paths for data transmission.
NEW QUESTION # 33
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: D
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 34
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?
Answer: D
Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.
NEW QUESTION # 35
......
All SRAN-Radio-Network-Performance-Optimization online tests begin somewhere, and that is what the SRAN-Radio-Network-Performance-Optimization training course will do for you: create a foundation to build on. Study guides are essentially a detailed SRAN-Radio-Network-Performance-Optimization tutorial and are great introductions to new SRAN-Radio-Network-Performance-Optimization training courses as you advance. The content is always relevant, and compound again to make you pass your SRAN-Radio-Network-Performance-Optimization Exams on the first attempt. You will frequently find these SRAN-Radio-Network-Performance-Optimization PDF files downloadable and can then archive or print them for extra reading or studying on-the-go.
New SRAN-Radio-Network-Performance-Optimization Braindumps Files: https://www.prep4pass.com/SRAN-Radio-Network-Performance-Optimization_exam-braindumps.html
P.S. Free 2026 Nokia SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1JdeU_dC7eFmZJIUC8Klh97bKBn9ihZPo