Our experts are researchers who have been engaged in professional qualification AZ-802 exams for many years and they have a keen sense of smell in the direction of the examination. Therefore, with our AZ-802 study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the AZ-802 Exam. We have free demos of the AZ-802 exam materials that you can try before payment.
| Section | Objectives |
|---|---|
| Topic 1: Secure Windows Server hybrid infrastructures | - Security configuration
|
| Topic 2: Implement and manage high availability | - Failover clustering
|
| Topic 3: Monitoring and troubleshooting | - Diagnostics
|
| Topic 4: Networking and storage infrastructure | - Storage management
|
| Topic 5: Manage hybrid compute and virtualization | - Virtual machines
|
| Topic 6: Disaster recovery and migration | - Migration scenarios
|
>> AZ-802 Valid Braindumps Pdf <<
Our AZ-802 study guide provides free trial services, so that you can gain some information about our study contents, topics and how to make full use of the software before purchasing. It’s a good way for you to choose what kind of AZ-802 test prep is suitable and make the right choice to avoid unnecessary waste. Besides, if you have any trouble in the purchasing AZ-802 practice torrent or trail process, you can contact us immediately and we will provide professional experts to help you online.
NEW QUESTION # 565
You need to create a Hyper-V hyper-converged cluster that stores virtual machines by using Storage Spaces Direct. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create a failover cluster. 2. Enable Storage Spaces Direct. 3. Create a volume.
Deploying a Hyper-V hyper-converged cluster backed by Storage Spaces Direct follows a fixed, documented order of operations. The process begins by validating the intended nodes and creating a failover cluster from them, since Storage Spaces Direct is a capability that is enabled on top of an already-existing failover cluster rather than something that can be configured before a cluster exists. Once the cluster is formed, running Enable-ClusterStorageSpacesDirect, or the equivalent Windows Admin Center wizard, pools the local disks contributed by every node in the cluster into a single software-defined storage pool that spans the cluster.
Only after that pool exists can one or more volumes actually be created from it, and those volumes become the Cluster Shared Volumes that Hyper-V virtual machines are placed on and run from. A Scale-Out File Server role and a Distributed File System namespace both belong to a converged, or disaggregated, deployment model where compute and storage live on entirely separate clusters, so neither applies to this hyper-converged design, and creating a plain file share is unnecessary since Hyper-V virtual machines are stored directly on the CSV volumes rather than accessed through a file share.
NEW QUESTION # 566
Your network contains an Active Directory Domain Services (AD DS) domain The domain contains an organizational unit (OU) named OU1 and a user named User1.
You plan to deploy a Hyper V failover cluster named Cluster1.
You need to prestage the account for Cluster! and ensure that User1 can deploy Cluster1. The solution must follow the principle of least privilege.
Which action should you perform, and which permissions should you grant to User1 for Cluster1? To answer, select the appropriate options in the answer area NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Prestaging a cluster name object involves creating a computer account for Cluster1 in AD DS and then disabling it, which lets the cluster creation process confirm during setup that the prestaged account is not already in active use before it takes ownership of it; leaving the account enabled bypasses this safety check.
To let User1 create the Hyper-V failover cluster without granting broader administrative rights, User1 is given Full Control permission specifically on that prestaged Cluster1 computer object rather than on the OU or on user rights more broadly, which satisfies the principle of least privilege while still allowing User1 to complete cluster creation. Creating a user account named Cluster1 instead of a computer account would not produce the cluster name object that cluster validation expects, and granting only Allowed to Authenticate or Create all child objects would not be sufficient for User1 to take ownership of and configure the prestaged object during cluster creation.
NEW QUESTION # 567
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. You have a Hyper-V failover cluster named Cluster1. All servers are members of the same domain. You need to ensure that you use Hyper-V Replica with Kerberos authentication on the default port to replicate virtual machines from Cluster1 to Server1. What should you do on Server1?
Answer: A
Explanation:
Hyper-V Replica supports two authentication-and-transport combinations: Kerberos authentication carried over HTTP on TCP port 80, and certificate-based authentication carried over HTTPS on TCP port 443.
Enabling Hyper-V Replica on a host creates both corresponding inbound firewall rules but leaves them disabled by default, so to actually receive replication traffic authenticated with Kerberos on its default port, an administrator must explicitly enable the Hyper-V Replica HTTP Listener (TCP-In) rule in Windows Defender Firewall with Advanced Security on Server1. Enabling the HTTPS Listener rule instead would only be correct if certificate-based authentication were being used, which is not the case here since Kerberos is specifically required. Adding primary servers to a Hyper-V Replica Broker configuration applies only to a clustered replica destination, but Server1 is a standalone Hyper-V host, not a cluster, so no broker role exists to configure. Enabling incoming and outgoing live migrations addresses live migration functionality entirely separate from Hyper-V Replica traffic. Therefore, enabling the Hyper-V Replica HTTP Listener (TCP-In) rule on Server1 is the correct action.
NEW QUESTION # 568
You have a server named Server1 that runs Windows Server and has the Hyper V server role installed.
Server1 hosts a virtual machine named VM1.
Server1 has an NVMe storage device. The device is currently assigned to VM1 by using Discrete Device Assignment.
You need to make the device available to Server1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
The Administering Windows Server Hybrid Core Infrastructure (AZ-800) study content for Hyper-V and Discrete Device Assignment (DDA) explains that devices passed through to a guest are first dismounted from the host and then attached to the VM . To return the hardware to the host you must reverse those steps in the proper order. The guide states that when reclaiming a DDA device, the VM must be powered off before removal , and you must use Remove-VMAssignableDevice to detach the device from the VM. After removal, the device remains in a host-dismounted state until you explicitly mount it back to the host with Mount-VMHostAssignableDevice . Finally, to make the hardware usable by the host OS, re-enable the device in Device Manager . This sequence is summarized in the course materials as: stop (turn off) the VM that owns the device # remove the VM assignment (Remove-VMAssignableDevice) # return it to the host (Mount-VMHostAssignableDevice) # enable the device for host use (Device Manager). This ensures the NVMe device is properly detached from VM1, made available to Server1 again, and recognized/initialized by Windows on the host for normal operation.
NEW QUESTION # 569
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You implement a central store. You create a new Group Policy Object (GPO) named GPO1. When you attempt to edit GPO1, you see that the " Administrative Templates: Policy definitions (ADMX files) retrieved from the central store " node shows only two settings (far fewer than the normal full set of Administrative Template settings). You need to ensure that all settings are available. Solution: You delete the \\contoso.
com\SYSVOL\contoso.com\Policies\PolicyDefinitions folder. Does this meet the goal?
Group Policy Management Editor showing limited Administrative Templates settings
Answer: B
Explanation:
Windows does not automatically populate the Group Policy Central Store; an administrator creates the empty PolicyDefinitions folder in SYSVOL and must manually copy the full set of ADMX/ADML administrative template files into it. Once a Central Store exists, the Group Policy Management Editor exclusively displays the ADMX files that physically exist inside that Central Store -- it never falls back to using a workstation ' s local C:\Windows\PolicyDefinitions folder as long as the Central Store is present. The fact that only two settings appear means someone created the Central Store and copied in just a couple of custom ADMX
/ADML files (evidently ActiveX-related ones) but never copied in the full default Windows ADMX/ADML set, so this is fundamentally a content problem with the store, not a problem with GPO1 itself. Deleting the PolicyDefinitions folder entirely would cause the Group Policy Management Editor to fall back to whatever ADMX files exist locally on each individual administrator ' s own workstation -- which may vary in completeness from machine to machine and defeats the entire purpose of having a centralized, consistent store
-- rather than actually restoring the complete, intended set of settings in a centralized way. Therefore, deleting the Central Store ' s PolicyDefinitions folder does not meet the goal.
NEW QUESTION # 570
......
For years our team has built a top-ranking brand with mighty and main which bears a high reputation both at home and abroad. The sales volume of the AZ-802 study materials we sell has far exceeded the same industry and favorable rate about our products is approximate to 100%. Why the clients speak highly of our AZ-802 Study Materials? Our dedicated service, high quality and passing rate and diversified functions contribute greatly to the high prestige of our products.
AZ-802 Valid Braindumps Files: https://www.getvalidtest.com/AZ-802-exam.html