2026 Latest Pass4SureQuiz NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1HF5Uk9-yzLZ0jIwA22Qcploa2nLuYnPm
This format enables you to assess your NSEI_OTS_AR-7.6 test preparation with a NSEI_OTS_AR-7.6 practice exam. You can also customize your time and the kinds of questions of the Fortinet NSEI_OTS_AR-7.6 Practice Test. This Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 practice test imitates the Fortinet NSEI_OTS_AR-7.6 real exam pattern. Thus, it helps you kill Fortinet NSE I - OT Security 7.6 Architect exam anxiety.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC - Fortinet Security Fabric for OT environments |
| Topic 2: Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
| Topic 3: Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems - Security automation and threat response |
| Topic 4: Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 |
>> NSEI_OTS_AR-7.6 PDF Cram Exam <<
You must be curious about your exercises after submitting to the system of our NSEI_OTS_AR-7.6 study materials. Now, we have designed an automatic analysis programs to facilitate your study. You will soon get your learning report without delay. Not only can you review what you have done yesterday on the online engine of the NSEI_OTS_AR-7.6 study materials, but also can find your wrong answers and mark them clearly. So your error can be corrected quickly. Then you are able to learn new knowledge of the NSEI_OTS_AR-7.6 Study Materials. Day by day, your ability will be elevated greatly. Intelligent learning helper can relieve your heavy burden. Our NSEI_OTS_AR-7.6 study materials deserve your purchasing. If you are always waiting and do not action, you will never grow up.
NEW QUESTION # 26
Refer to the exhibit.
A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)
Answer: D
Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .
NEW QUESTION # 27
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 28
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 29
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: C
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 30
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: C
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 31
......
Fortinet certification NSEI_OTS_AR-7.6 exams has a pivotal position in the IT industry, and I believe that a lot of IT professionals agree with it. Passing Fortinet certification NSEI_OTS_AR-7.6 exam has much difficulty and needs to have perfect IT knowledge and experience. Because after all, Fortinet certification NSEI_OTS_AR-7.6 exam is an authoritative test to inspect examinees' IT professional knowledge. If you have got a Fortinet NSEI_OTS_AR-7.6 Certification, your IT professional ability will be approved by a lot of IT company. Pass4SureQuiz also has a pivotal position in IT training industry. Many IT personnels who have passed Fortinet certification NSEI_OTS_AR-7.6 exam used Pass4SureQuiz's help to pass the exam. This explains why Pass4SureQuiz's pertinence training program is very effective. If you use the training material we provide, you can 100% pass the exam.
NSEI_OTS_AR-7.6 Interactive Course: https://www.pass4surequiz.com/NSEI_OTS_AR-7.6-exam-quiz.html
BTW, DOWNLOAD part of Pass4SureQuiz NSEI_OTS_AR-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1HF5Uk9-yzLZ0jIwA22Qcploa2nLuYnPm