What's more, part of that Pass4training Network-Security-Essentials dumps now are free: https://drive.google.com/open?id=1Ol6cfMnXf6p2rvYwdXoR6SEMlRZtbhx2
For candidates who are looking for Network-Security-Essentials exam braindumps, they pay much attention to the quality. With experienced experts to compile and verify, Network-Security-Essentials exam materials are high quality, and you can pass your exam and get the corresponding certification successfully. In addition, we recommend you to try free demo for Network-Security-Essentials Exam Dumps before purchasing, so that you can know what the complete version is like. We have online and offline service. If you have any questions for Network-Security-Essentials exam materials, you can consult us, and we will give you reply as quickly as we can.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Firebox Configuration and Management | 30% | - Device Setup and Administration
|
| Topic 2: Monitoring and Subscription Services | 10% | - Logging and Security Services
|
| Topic 3: VPN and Authentication | 15% | - Secure Connectivity
|
| Topic 4: Firewall Policies and Proxies | 25% | - Traffic Control
|
| Topic 5: Network and Network Security Basics | 20% | - Networking Fundamentals
|
>> New Study Network-Security-Essentials Questions <<
Standing out among all competitors and taking the top spot is difficult but we made it by our Network-Security-Essentials preparation materials. They are honored for their outstanding quality and accuracy so they are prestigious products. Our Network-Security-Essentials exam questions beat other highly competitive companies on a global scale. They provide a high pass rate for our customers as 98% to 100% as a pass guarantee. And as long as you follow with the Network-Security-Essentials Study Guide with 20 to 30 hours, you will be ready to pass the exam.
NEW QUESTION # 37
When you configure a Branch Office VPN tunnel to a third-party device, AES-GCM encryption is recommended for:
Answer: D
Explanation:
AES-GCM (Galois/Counter Mode)encryption is recommended for VPNs because it provides strong encryption with high performance and low overhead, making it an ideal choice for environments where both endpoints support it. AES-GCM combines encryption and authentication in a single step, resulting in faster processing compared to traditional encryption modes that handle these tasks separately. This mode is advantageous for maintaining high throughput in VPN tunnels, especially beneficial for branch office or inter- site VPNs where performance is critical.
NEW QUESTION # 38
When Mobile VPN is enabled, remote users receive the domain name and DNS servers from the Firebox Network Configuration by default.
Answer: A
Explanation:
Comprehensive Technical Explanation:
When configuring Mobile VPN solutions in Fireware OS (including Mobile VPN with IKEv2, SSL, and L2TP), the default name resolution behavior is inherited from the central appliance settings. In the Mobile VPN configuration dialog, the DNS and WINS settings default to: 'Assign the Network DNS/WINS settings to mobile clients.' Under this default setting, the Firebox automatically pushes the primary domain name, search domains, and DNS server IP addresses defined in the Firebox global Network Configuration (Network > Configuration > WINS/DNS) down to connected remote clients during tunnel establishment. This ensures that remote clients immediately receive the organization's internal DNS servers and local domain suffix, enabling them to resolve internal hostnames across the secure tunnel without requiring manual client-side network configuration.
While administrators have the option to override this behavior by selecting 'Assign these settings' to specify custom DNS servers dedicated exclusively to mobile users, the default behavior relies on the global Firebox network settings.
Reference: WatchGuard Network Security Essentials - Networking, Policies, and NAT: Mobile VPN Name Resolution and DNS/WINS Configuration.
##########################################################
NEW QUESTION # 39
You recently installed network monitoring software on your server and then performed a port scan for each IP address in the network. When the scan finishes, you notice that the server lost access to the Internet. What is the most likely cause of this issue? (Select one.)
Answer: D
Explanation:
When a port scan is detected, Firebox devices with default settings often include a rule to add the source IP address of the scan to the Blocked Sites list to prevent potential threats. This is a standard security measure in Firebox configurations, aimed at mitigating the risk of network scanning attempts. Consequently, if the server you used to perform the port scan was added to the Blocked Sites list, it would lose Internet access as the device blocks any outgoing connections from that IP. This behavior aligns with Firebox's handling of port scan detection through default security rules.
NEW QUESTION # 40
You routinely ship Fireboxes directly to remote offices without configuring them first. What is the zero-touch deployment method you can use to apply a configuration file after a Firebox arrives at a remote office? (Select one.)
Answer: C
Explanation:
Comprehensive Technical Explanation:
WatchGuard RapidDeploy is an automated provisioning technology designed to eliminate the requirement for skilled IT personnel to be physically present at remote branch offices during network rollout. Under the RapidDeploy workflow, a central network administrator registers the Firebox serial number in the WatchGuard Cloud / Portal and uploads a pre-authored Firebox configuration file XML or assigns a deployment template.
When the packaged, factory-default Firebox physically arrives at the target branch location, non-technical personnel simply connect interface 0 to the local ISP broadband modem or uplink switch and power the device on. During initial bootup, the Firebox obtains an IP address via DHCP on its external interface, initiates an outbound secure TLS call to the central WatchGuard RapidDeploy deployment server, authenticates its serial number and feature key, and downloads its pre-assigned configuration file automatically. Once applied, the Firebox transitions directly into production without local console access or manual Web Setup Wizard execution. Options A and B require manual on-site or routable network configuration; Option C is used for centralized management of previously deployed devices; and Option E does not exist in Fireware.
Reference: WatchGuard Network Security Essentials - Administration and Setup: Automated Provisioning and Zero-Touch RapidDeploy Methods.
##########################################################
NEW QUESTION # 41
Clients on the 10.0.10.0/24 network must connect to the server at 10.0.20.100. Based on this image, what static route must you add to the Firebox for traffic to reach the server? (Select one.)
Answer: C
Explanation:
Comprehensive Technical Explanation:
When configuring static routing on a WatchGuard Firebox, the static route table must specify a destination network or host address and the next-hop IP gateway through which that destination can be reached. The gateway must be directly reachable via an existing Firebox interface on the same broadcast subnet. In the network topology shown, the Firebox has directly connected interfaces on Eth1 (10.0.10.1/24) and Eth2 (10.0.2.1/24). The server resides behind an internal router on an indirect subnet: 10.0.20.0/24. The Firebox has no direct knowledge of 10.0.20.0/24. The intermediate router possesses an interface facing the Firebox with the IP address 10.0.2.254, which sits directly on the Firebox Eth2 subnet (10.0.2.0/24). Therefore, to steer traffic destined for 10.0.20.0/24 correctly, the Firebox administrator must configure an IPv4 static route specifying the destination network as 10.0.20.0/24 and the next-hop gateway as 10.0.2.254. Both options B and E are textually identical in the source exam, with B being the primary correct selection.
Reference: WatchGuard Network Security Essentials - Networking, Policies, and NAT: IPv4 Static Routes Configuration & Next-Hop Addressing.
##########################################################
NEW QUESTION # 42
......
At the moment you come into contact with our Network-Security-Essentials learning guide you can enjoy our excellent service. You can ask our staff about what you want to know. After full understanding, you can choose to buy our Network-Security-Essentials exam questions. If you use the Network-Security-Essentials study materials, you have problems that you cannot solve. Just contact with us via email or online, we will deal with you right away. And we offer 24/7 online service. So if you have any problem, you can always contact with us no matter any time it is.
Network-Security-Essentials Real Questions: https://www.pass4training.com/Network-Security-Essentials-pass-exam-training.html
P.S. Free & New Network-Security-Essentials dumps are available on Google Drive shared by Pass4training: https://drive.google.com/open?id=1Ol6cfMnXf6p2rvYwdXoR6SEMlRZtbhx2