P.S. Free & New NCA-7.5 dumps are available on Google Drive shared by Real4Prep: https://drive.google.com/open?id=1LM5ZrfohAlZi6vMa8QCuZa1HRO2yEGvN
It is inescapable choice to make why don't you choose our NCA-7.5 practice materials with passing rate up to 98-100 percent. You can have a sweeping through of our NCA-7.5 practice materials with intelligibly and under-stable contents. It is time to take the plunge and you will not feel depressed. All incomprehensible issues will be small problems and all contents will be printed on your minds. So even trifling mistakes can be solved by using our NCA-7.5 practice materials, as well as all careless mistakes you may make.
| Section | Objectives |
|---|---|
| Topic 1: Recognize Nutanix Solutions and Tools | - Recognize Nutanix solutions, use cases, and features of Nutanix Cloud Infrastructure (NCI) technologies - Recognize non-Nutanix Cloud Infrastructure (NCI) solutions, use cases, and features - Recognize use cases and features of Nutanix tools |
| Topic 2: Describe Nutanix Platform Administration | - Identify virtual networking tasks - Describe virtual machine tasks - Describe licensing tasks - Discuss storage operations |
| Topic 3: Describe Cluster Configuration and Maintenance | - Identify software maintenance tasks - Describe valid cluster options - Identify hardware maintenance tasks |
| Topic 4: Demonstrate and Understand Platform Health and Monitoring | - Review and interpret alerts and events - Leverage support functions - Review and interpret workload performance - Perform and interpret a health check |
Our website aimed to helping you and fully supporting you to pass NCA-7.5 actual test with high passing score in your first try. So we prepared top NCA-7.5 pdf torrent including the valid questions and answers written by our certified professionals for you. Our NCA-7.5 Practice Exam available in three modes, pdf files, and PC test engine and online test engine, which apply to any level of candidates.
NEW QUESTION # 33
Before a cluster with active licenses is decommissioned, what must be done to ensure the licenses are available to be applied to a new cluster?
Answer: C
Explanation:
The active licenses must be reclaimed before the cluster is destroyed. Reclaiming or unlicensing the cluster releases its assigned entitlement so that the available capacity can be applied to another qualified Nutanix cluster. Nutanix explicitly lists license reclamation as a prerequisite for cluster destruction.
Destroying a cluster without first reclaiming its licenses can leave the entitlement associated with a cluster that no longer exists. The licenses are not guaranteed to return automatically merely because the underlying nodes were reimaged, removed, or decommissioned. This can prevent the organization from assigning the purchased capacity to the replacement environment and may require licensing remediation.
The proper workflow is to verify the cluster's current licensing state, use License Manager to reclaim or unlicense the applicable entitlement, confirm that the capacity has returned to the available license inventory, and only then proceed with cluster destruction. Nutanix Support may assist when a cluster is already inaccessible or was destroyed without reclamation, but contacting Support is not the standard required workflow.
Nutanix licenses are generally reusable and portable according to their applicable terms, so option C is also incorrect.
NHCF/NCA reference: License reclamation, cluster decommissioning, and License Manager. Official references: Destroying a Cluster and License Manager Guide .
NEW QUESTION # 34
An administrator needs to configure cluster fault tolerance of 1N & 1D.
How many nodes must the cluster have for this task?
Answer: C
Explanation:
The 1N & 1D cluster fault-tolerance level is supported on a three-node cluster. It is designed to maintain access to data when one complete node and one additional disk fail concurrently, provided that the failures and remaining resources satisfy the documented resiliency conditions. To achieve this protection level, the platform configures replication factor 3 for the relevant data and maintains three metadata copies.
This configuration is distinct from standard 1N/1D fault tolerance, which protects against either one node failure or one disk failure and normally uses data replication factor 2. The ampersand in 1N & 1D is technically significant because it indicates simultaneous node-and-disk protection.
A two-node cluster uses a separate witness-based architecture and cannot provide this three-node 1N & 1D configuration. Nutanix documentation identifies three as both the required and supported node count for this specific fault-tolerance mode. Larger conventional clusters use their applicable fault-tolerance configurations rather than treating 1N & 1D as an arbitrary scalable setting.
Administrators must also verify that the cluster has sufficient resilient capacity before enabling the higher protection level. References: Prism 7.5 - One Node and One Disk Cluster Fault Tolerance and Cluster Fault Tolerance .
NEW QUESTION # 35
A virtual appliance provides network services required by other VMs on the same host. The VM should start before other VMs, shut down after other VMs, and remain associated with the same host during maintenance operations.
Which VM configuration best matches this requirement?
Answer: C
Explanation:
The virtual appliance should be configured as an agent VM. AHV agent VMs are intended for infrastructure or service appliances that provide host-local functionality required by ordinary guest VMs. The agent designation gives the VM specialized power-order and placement behavior: it is powered on before normal VMs, powered off after normal VMs, and is not live-migrated to another host while running.
If the host experiences an HA event or enters maintenance mode, the agent VM is powered off rather than migrated. After the host returns to normal operation, the agent VM is powered on again on that same host.
This preserves the intended host-local association of services such as network, security, monitoring, or storage appliances.
VM-Host affinity alone expresses a placement preference or requirement but does not provide the complete agent-VM startup and shutdown ordering. Nutanix Guest Tools provides guest-management and snapshot capabilities, not host-local service-appliance semantics. Disconnecting the vNIC would prevent the appliance from delivering the stated network services.
All three requirements-startup priority, delayed shutdown, and host persistence-therefore identify the agent VM configuration.
NHCF/NCA reference: AHV VM configuration, infrastructure appliances, power sequencing, and host maintenance behavior. Official references: Creating an AHV VM and Agent VM Behavior .
NEW QUESTION # 36
What would cause storage compression to become automatically disabled?
Answer: D
Explanation:
Nutanix AOS automatically disables compression when metadata usage becomes high. The Prism 7.5 storage documentation explicitly identifies this condition and states that an alert is generated when automatic disablement occurs. Consequently, option D is the verified answer, replacing the supplied answer A.
Compression requires AOS metadata resources to track compressed extents and the associated data layout. If metadata consumption reaches a protective threshold, continuing compression could place additional pressure on the metadata services required for normal storage operation. AOS therefore prioritizes platform stability and metadata availability by disabling compression and notifying the administrator. The corresponding health alert should be investigated to determine why metadata usage has increased and whether workload characteristics or another storage condition requires remediation.
High write activity may increase storage workload and influence when post-process compression can execute, but it is not the documented automatic-disable trigger in this question. High reads similarly do not directly cause compression to be disabled. High physical-capacity consumption generates its own capacity warnings and corrective requirements but is distinct from the metadata threshold governing compression.
NHCF/NCA reference: Storage Concepts-capacity optimization, compression and storage-container administration; NCA Section 2, "Discuss storage operations." Official references: Prism 7.5-Compression , Prism 7.5-Storage Alert Reference .
NEW QUESTION # 37
Which task must be performed first when preparing to upgrade an Internet-connected Nutanix cluster using Life Cycle Manager?
Answer: B
Explanation:
The administrator must first run an LCM inventory. Inventory establishes the cluster's current software and firmware state, refreshes component metadata, and obtains information about compatible updates available through the connected Nutanix source. LCM requires this baseline before it can accurately identify upgrade candidates and construct a valid update plan.
Executing an upgrade immediately is premature because LCM must first know which component versions are installed and which update combinations are supported. The upgrade workflow subsequently performs dependency evaluation and prechecks before applying selected components. Directly uploading software bundles is principally associated with dark-site or disconnected workflows. An Internet-connected cluster can retrieve the required metadata and available bundles through its configured online source. Restarting cluster services is neither the initial preparation step nor a normal manual prerequisite for LCM discovery.
Inventory also refreshes the LCM framework when required and makes the resulting component information available in the management interface. After inventory completes, the administrator reviews available updates, selects applicable components, executes prechecks, resolves reported issues, and then initiates the upgrade plan. This sequence minimizes compatibility and dependency risks.
NHCF/NCA reference: Life Cycle Manager, connected-site operation, inventory, prechecks, and upgrade planning. Official references: Performing LCM Inventory and Pre-Upgrade Configurations and Recommendations .
NEW QUESTION # 38
......
Our NCA-7.5 Research materials design three different versions for all customers. These three different versions include PDF version, software version and online version, they can help customers solve any problems in use, meet all their needs. Although the three major versions of our NCA-7.5 learning materials provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality. The most important feature of the online version of our NCA-7.5 Learning Materials are practicality. The online version is open to all electronic devices, which will allow your device to have common browser functionality so that you can open our products. At the same time, our online version of the NCA-7.5 learning materials can also be implemented offline, which is a big advantage that many of the same educational products are not able to do on the market at present.
NCA-7.5 Dumps Discount: https://www.real4prep.com/NCA-7.5-exam.html
What's more, part of that Real4Prep NCA-7.5 dumps now are free: https://drive.google.com/open?id=1LM5ZrfohAlZi6vMa8QCuZa1HRO2yEGvN