Learning knowledge is just like building a house, our JN0-352 training materials serve as making the solid foundation from the start with higher efficiency. Even if this is just the first time you are preparing for the exam, you can expect high grade. Taking full advantage of our JN0-352 Preparation exam and getting to know more about them means higher possibility of it. And if you have a try on our JN0-352 exam questions, you will love them.
| Section | Weight | Objectives |
|---|---|---|
| Layer 2 Security | 10-15% | - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Layer 2 firewall filters and security features - Port security, MAC limiting and storm control |
| OSPF | 15-20% | - Neighbor formation, area design and LSA types - Route summarization and redistribution - Configuration, verification and troubleshooting |
| High Availability and Resiliency | 5-10% | - Network resiliency design and troubleshooting - Redundancy protocols and failover mechanisms - Graceful restart and non-stop routing |
| Tunnels and Overlays | 5-10% | - Tunnel types, encapsulation and operation - GRE, IP-IP and dynamic tunnel configuration - Overlay network design and connectivity |
| IS-IS | 10-15% | - Configuration and route exchange - Scalable enterprise deployment and troubleshooting - Adjacency establishment, levels and metrics |
| IP Multicast | 5-10% | - PIM Dense Mode, Sparse Mode and RP mechanisms - IGMP operation and configuration - Multicast routing monitoring and troubleshooting |
| Layer 2 Switching and VLANs | 15-20% | - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis |
| BGP | 15-20% | - Routing policies, filtering and common troubleshooting - Route advertisement, attributes and path selection - Neighbor relationships and session establishment |
| Protocol Independent Routing | 10-15% | - Routing tables, static routes and route preference - Basic routing policy and filter operation - Routing instances and route selection criteria |
>> JN0-352 Reliable Exam Question <<
We believe that you can buy our JN0-352 demo PDF torrent without any misgivings, Firstly, we have a strong experts team who are devoted themselves to research of the technology, which ensure the high-quality of our JN0-352 Dump guide, ActualVCE offers Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-352 free Updates. It is no exaggeration to say that the value of the certification training materials is equivalent to all exam related reference books.
NEW QUESTION # 62
What determines the preferred route to a destination in an IS-IS network?
Answer: D
Explanation:
IS-IS is a link-state protocol that, like OSPF, runs Dijkstra's Shortest Path First algorithm independently on each router against its own copy of the synchronized link-state database to compute the best path toward every reachable destination. Each link within the topology carries an administrator-assigned or default metric, and as the SPF algorithm walks the topology graph from the local router outward, it sums the metrics of every link traversed along a candidate path to produce that path's total accumulated cost. Among all possible paths to a given destination prefix, IS-IS always selects and installs the path (or, in the case of equal-cost multipath, the set of paths) with the numerically lowest total accumulated metric, exactly mirroring the 'lowest cost wins' principle shared by essentially all link-state IGPs. A higher accumulated metric value is by definition a less preferred, more costly path, making that option the direct inverse of correct IS-IS behavior. Level 2 proximity to the destination has no independent bearing on path selection beyond however it happens to be reflected in the accumulated metric itself - IS-IS does not apply a separate rule preferring paths merely for passing near a Level 2 router. Likewise, LSP recency (sequence number or freshness) governs which version of a given LSP is trusted and flooded during database synchronization, ensuring the topology database itself is accurate and loop-free, but it plays no role in the SPF cost comparison once the database is synchronized and consistent. Reference topics: Junos Enterprise Routing - IS-IS, SPF Calculation and Metric-Based Path Selection.
NEW QUESTION # 63
Referring to the exhibit, which three statements are correct? (Choose three.)
Answer: B,D,E
Explanation:
The IP source guard is enabled.
The configuration shows that ip-source-guardis explicitly enabled under dhcp-security.
Dynamic ARP inspection is enabled.
The configuration also includes arp-inspectionunder dhcp-security, which indicates that Dynamic ARP Inspection (DAI) is enabled.
DHCP snooping is enabled.
DHCP snooping is implied as enabled because both IP source guard and ARP inspection are dependent on the DHCP snooping database to function properly. Even though DHCP snooping is not explicitly mentioned, its presence is required for these features to work.
NEW QUESTION # 64
Referring to the exhibit, which policy will export routes to IBGP peers?
Answer: D
NEW QUESTION # 65
Which statement describes how Rapid Spanning Tree Protocol (RSTP) identifies an alternate port?
Answer: D
Explanation:
RSTP, as defined in IEEE 802.1w, introduces explicit, well-defined port roles that go beyond legacy 802.1D STP's simpler root/designated/blocking model, and the alternate port role is one of RSTP's key refinements. An alternate port is a port that receives BPDUs from a bridge other than the one through which the local switch's actual root port reaches the root bridge -- in other words, it represents a second, redundant path toward the root bridge learned from a different upstream bridge than the one currently providing the best (root port) path. Because the existing root port already provides the lowest-cost, actively used path to the root, the alternate port is deliberately held in the discarding (non-forwarding) state during normal, stable operation, functioning purely as a pre-computed, ready-to-use backup; critically, RSTP's major performance advantage over legacy STP is that if the current root port fails, the switch can transition its alternate port directly and almost instantly into the forwarding root port role without needing to pass through the lengthy listening and learning timer-based states that classic STP required, since the alternate port's suitability as a backup was already continuously verified through ongoing BPDU reception. It is not simply 'not receiving BPDUs' (an alternate port receives BPDUs continuously, just inferior ones relative to the current root port), it is not itself the least-cost path (that describes the root port), and it does not forward based on designated-port overload, which is not a concept that exists in RSTP's port-role logic at all.
NEW QUESTION # 66
Which two statements describe OSPF DR and BDR behavior? (Choose two.)
Answer: A,D
Explanation:
The Backup Designated Router exists specifically to provide immediate failover redundancy for the Designated Router role on a multi-access broadcast or NBMA segment: the BDR maintains full adjacencies with every other router on the segment concurrently with the DR, precisely so that if the DR ever fails or is withdrawn, the BDR can be promoted directly to DR essentially instantaneously, without needing to wait through a fresh, full DR/BDR election process, and a new BDR election then takes place separately among the remaining DROther routers to fill the now-vacant backup role. This immediate promotion behavior confirms the first statement as correct. The Designated Router's other core responsibility on the segment is originating the Type
2 Network LSA, which describes the multi-access network itself as a pseudonode, listing every router attached to that segment; this LSA type exists specifically to avoid the full-mesh explosion of Router LSA adjacency listings that would otherwise be needed to describe a shared broadcast segment, and only the DR -- never the BDR, and never any DROther -- is responsible for generating and maintaining this particular LSA under normal, stable conditions, which confirms the third statement while directly ruling out the fourth. There is no such thing as the DR 'electing' an area border router; ABR status is instead a role a router acquires organically by having interfaces in more than one OSPF area, entirely independent of any DR/BDR election process on any individual segment.
NEW QUESTION # 67
......
ActualVCE's study material is available in three different formats. The reason we have introduced three formats of the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) practice material is to meet the learning needs of every student. Some candidates prefer JN0-352 practice exams and some want Real JN0-352 Questions due to a shortage of time. At ActualVCE, we meet the needs of both types of aspirants. We have Juniper JN0-352 PDF format, a web-based practice exam, and Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) desktop practice test software.
JN0-352 Dumps Questions: https://www.actualvce.com/Juniper/JN0-352-valid-vce-dumps.html