What's more, part of that Lead1Pass FlashArray-Storage-Professional dumps now are free: https://drive.google.com/open?id=1kgz_sASFzl8mGNx-YLy6WyuMy3dXwSvz
To buy after trial! Our Lead1Pass is responsible for every customer. We provide for you free demo of FlashArray-Storage-Professional exam software to let you rest assured to buy after you have experienced it. And we have confidence to guarantee that you will not regret to buy our FlashArray-Storage-Professional Exam simulation software, because you feel it's reliability after you have used it; you can also get more confident in FlashArray-Storage-Professional exam.
| Section | Objectives |
|---|---|
| Topic 1: Data Protection | - ActiveDR - ActiveCluster - Replication - Snapshots - SafeMode |
| Topic 2: FlashArray Administration | - Array Configuration and Management - Storage Concepts - FA File Services Configuration - Volume Configuration - Host Connections Configuration |
| Topic 3: Troubleshooting | - Troubleshooting Resources - Port Identification and Configuration - Incorrect Configuration - Alerts |
| Topic 4: Monitoring | - Reporting from Pure1, Graphical User Interface (GUI), and Command Line Interface (CLI) - Meta Forecasting - Pure1 Auditing and Alerts |
>> FlashArray-Storage-Professional Reliable Dumps Ppt <<
Our FlashArray-Storage-Professional practice materials are on the cutting edge of this line with all the newest contents for your reference. Free demos are understandable materials as well as the newest information for your practice. Under coordinated synergy of all staff, our FlashArray-Storage-Professional practice materials achieved to a higher level of perfection by keeping close attention with the trend of dynamic market. They eliminated stereotypical content from our Pure Certified FlashArray Storage Professional practice materials. And if you download our FlashArray-Storage-Professional practice materials this time, we will send free updates for you one year long.
NEW QUESTION # 59
An administrator is running commands to verify NVME/TCP connectivity from the hosts to the FlashArray. They use the command ping -M do -s 8972 <ip_addr> from the initiator and it fails.
What should the administrator do to resolve the issue?
Answer: A
Explanation:
When configuring NVMe/TCP (or iSCSI) for optimal performance on a Pure Storage FlashArray, configuring Jumbo Frames (an MTU of 9000) end-to-end is a standard best practice.
The command ping -M do -s 8972 <ip_addr> is specifically used to verify Jumbo Frame configuration across the network.
The -M do flag sets the "Do Not Fragment" (DF) bit, meaning the network is not allowed to break the packet into smaller pieces.
The -s 8972 flag sets the ICMP data payload to 8972 bytes. When you add the standard 8-byte ICMP header and the 20-byte IP header, the total packet size equals exactly 9000 bytes.
If this ping command fails, it indicates that somewhere along the network path between the host (initiator) and the FlashArray (target), a switch port, router, or network interface is not configured to support an MTU of 9000. The packet is being dropped because it is too large and cannot be fragmented. The administrator must verify the MTU settings on every network hop (switches, routers, and host NICs) to resolve the issue.
Here is why the other options are incorrect:
Engage support to enable NVME/ TCP services (A): The failure of a Jumbo Frame ping test is a Layer 2/Layer 3 network configuration issue, not an indicator that the NVMe/TCP storage protocol service is disabled on the array.
Run the command from the target (C): While pinging from the FlashArray back to the host is a valid secondary troubleshooting step, it will likely also fail if the network path doesn't support Jumbo Frames. The actual resolution is to fix the MTU on the network hops.
NEW QUESTION # 60
An administrator is attempting to add a volume to a volume group but it does not show up in the list of volumes available to move in, even though it does show up in the volumes pane.
Why is the volume missing?
Answer: A
Explanation:
In the Pure Storage Purity operating environment, a volume can only be a member of one Volume Group at a time.
When an administrator navigates to a Volume Group in the GUI and clicks to add members, the system filters the inventory and only displays volumes that are currently "unassigned" (not belonging to any Volume Group). If a volume is already residing inside another Volume Group, Purity intentionally hides it from this available list to prevent conflicting overlapping memberships. To resolve this, the administrator must first navigate to the volume's current Volume Group, remove the volume from that group, and then it will become available to add to the new one.
Here is why the other options are incorrect:
It is already part of a Protection Group (B): Protection Groups (pgroups) manage snapshot and replication schedules. A volume can absolutely be a standalone member of a Protection Group while simultaneously being added to a Volume Group. Being in a pgroup does not hide it from the vgroup selection list.
It is protected by SafeMode (C): SafeMode is a ransomware protection feature that prevents the manual eradication of destroyed volumes and snapshots before their retention timer expires. It does not dictate or restrict logical organizational containers like Volume Groups.
NEW QUESTION # 61
What is the Pure Storage recommended Maximum Transmission Unit (MTU) size for the replication ports on a FlashArray?
Answer: B
Explanation:
Understanding MTU: The Maximum Transmission Unit (MTU) defines the largest size of a packet or frame that can be sent in a single network transaction. The standard Ethernet MTU is 1500 bytes. Anything larger than 1500 bytes is referred to as a Jumbo Frame.
Replication Efficiency: Replication involves moving large amounts of data between arrays. Using standard 1500-byte frames results in higher overhead because the CPU must process a larger number of headers for the same amount of data. By increasing the MTU, the FlashArray can pack more data into each frame, reducing CPU interrupts and improving overall throughput.
The Pure Recommendation: Pure Storage specifically recommends an MTU of 9000 for both iSCSI and Replication traffic. This is the industry standard for Jumbo Frames that balances efficiency with compatibility across most enterprise-grade switches.
Configuration Requirements: It is critical to remember that MTU must be configured end-to-end. For an MTU of 9000 to work on the replication ports:
The FlashArray replication ports must be set to 9000.
The network switches along the path (and any routers/ISLs) must support and be configured for at least 9000.
The target array's replication ports must also be set to 9000.
Why 9216 (Option A) is incorrect: While some switches support a "Baby Giant" or slightly larger MTU like 9216 to account for VLAN tagging overhead, Pure's internal and best practice documentation specifically points to 9000 as the standard setting for the array's interface.
NEW QUESTION # 62
What is a potential indicator of incorrect configuration on a Pure Storage FlashArray?
Answer: A
Explanation:
Understanding CRC Errors: CRC (Cyclic Redundancy Check) errors occur when the data received at a port does not match the checksum sent by the initiator or switch. In a Pure Storage environment, these are tracked per port and can be viewed via the CLI (purehw list) or the GUI.
Configuration vs. Hardware: While a failing SFP or a damaged fiber cable can cause CRC errors, they are a primary indicator of configuration mismatches in the SAN fabric. Common culprits include:
Port Speed Mismatches: Manually setting a port to 16Gbps when the switch is set to "Auto" or 8Gbps.
Duplex Mismatches: Though rare in modern Fibre Channel, it is a classic Ethernet/iSCSI configuration error.
MTU Mismatches: In iSCSI or NVMe-oF environments, if the FlashArray is configured for Jumbo Frames (MTU 9000) but the switch or host is at MTU 1500, packet fragmentation or CRC-like errors/drops will occur.
Why Option A is incorrect: A blinking status LED on a controller is often part of normal operation (indicating heartbeat or activity). A solid amber LED would be an indicator of a hardware failure, not necessarily a misconfiguration.
Why Option C is incorrect: While latency spikes can be caused by misconfiguration (like incorrect MPIO settings), they are more commonly symptoms of workload changes, "noisy neighbors," or reaching the physical performance limits of the array. CRC errors are a much more specific diagnostic "smoking gun" for port and fabric configuration issues.
Best Practice: When CRC errors are detected, Pure Storage recommends first checking the physical layer (reseating SFPs/cables) and then verifying that the port speed and protocol settings on the FlashArray match the upstream switch configuration exactly.
NEW QUESTION # 63
A FlashArray is set up with LDAP authentication. A user is a member of the groups associated with both Array Admin and Storage Admin.
What experience is expected for the user?
Answer: A
Explanation:
Similar to the previous question regarding directory services, Pure Storage Purity OS handles Role-Based Access Control (RBAC) overlaps by granting the most permissive role available to the user.
When configuring LDAP or Active Directory authentication on a FlashArray, administrators map directory groups to specific FlashArray roles (Array Admin, Storage Admin, Ops Admin, Read Only). If a user happens to be a member of multiple LDAP groups that are mapped to different roles on the array, Purity evaluates all mapped roles and automatically assigns the user the highest level of privilege during their session.
Since "Array Admin" has full administrative rights over the entire array (including hardware management, directory services configuration, and firmware upgrades) and sits higher in the hierarchy than "Storage Admin" (which is restricted to provisioning and managing storage objects like volumes and hosts), the system will seamlessly grant the user Array Admin permissions.
Here is why the other options are incorrect:
User will not be able to login (B): Purity is designed to handle this exact scenario smoothly. It resolves the conflict by defaulting to the higher privilege, rather than throwing an error or denying access.
User will have Storage Admin permissions (C): The system does not default to the lowest privilege or restrict access when a higher-level group membership is present and valid.
NEW QUESTION # 64
......
As we all know, certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of FlashArray-Storage-Professional certification now is higher and higher. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our FlashArray-Storage-Professional Study Materials. Carefully written and constantly updated content can make you keep up with the changing direction of the exam, without aimlessly learning and wasting energy.
Hottest FlashArray-Storage-Professional Certification: https://www.lead1pass.com/Pure-Storage/FlashArray-Storage-Professional-practice-exam-dumps.html
BTW, DOWNLOAD part of Lead1Pass FlashArray-Storage-Professional dumps from Cloud Storage: https://drive.google.com/open?id=1kgz_sASFzl8mGNx-YLy6WyuMy3dXwSvz