ExamsReviews not only provides you with the best Huawei practice exam materials, but also with the most comprehensive service. If you buy our H19-404_V1.0 exam questions and answers, you can get the right of free update exam pdf one-year. And you can try the free demo of our braindumps before you decide to buy. You will pass H19-404_V1.0 Exam Tests with the help of our latest learning materials and top questions.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Huawei Campus Network Solutions and Products | 20% | - Xinghe Intelligent Campus Solution overview - iMaster NCE-Campus management platform - Switches, WLAN products and AR routers |
| Topic 2: Campus Network Planning and Design Fundamentals | 15% | - Service requirements and demand analysis - Campus network architecture and evolution - Network design principles and methodologies |
| Topic 3: Scenario-based Campus Network Design | 25% | - Large campus and multi-branch interconnection design - Small and medium-sized campus network design - Cloud-managed and virtualized campus network design |
| Topic 4: Solution Promotion and Project Implementation | 15% | - Solution value analysis and competitive differentiation - Deployment guidance and acceptance criteria |
| Topic 5: Campus Network Technology Design | 25% | - VLAN, IP addressing and routing design - QoS, security and high availability design - WLAN planning, coverage and roaming design |
>> H19-404_V1.0 Pass Leader Dumps <<
In fact, in real life, we often use performance of high and low to measure a person's level of high or low, when we choose to find a good job, there is important to get the H19-404_V1.0 certification as you can. Our product is elaborately composed with major questions and answers. We are choosing the key from past materials to finish our H19-404_V1.0 Guide question. It only takes you 20 hours to 30 hours to do the practice. After your effective practice, you can master the examination point from the H19-404_V1.0 test question. Then, you will have enough confidence to pass it.
NEW QUESTION # 51
Which of the following parameters is not mandatory for GRE configuration?
Answer: A
Explanation:
Enabling the GRE checksum is optional. A functional point-to-point GRE tunnel requires a tunnel interface, GRE as the tunnel protocol, and reachable source and destination tunnel endpoints. The source identifies the local interface or IP address used to construct the delivery header, while the destination identifies the remote GRE endpoint. Without these endpoint parameters, the device cannot correctly encapsulate and deliver packets to the peer.
The checksum field is controlled by the Checksum Present bit in the GRE header. When checksum processing is enabled, the sender includes a checksum covering the GRE header and payload, and the receiver verifies it.
This can provide additional corruption detection, but it increases processing and is not required for basic GRE operation. RFC 2784 explicitly labels the checksum field as optional and states that it is present only when the Checksum Present bit is set.
Huawei SD-WAN uses GRE or GRE over IPsec to establish data channels between edge devices. The essential tunnel and transport-network information is distributed through the control system, while optional GRE functions such as checksum validation may be enabled according to operational requirements.
NEW QUESTION # 52
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?
Answer: C
Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.
NEW QUESTION # 53
On a campus fabric network, which of the following methods can be used for non-authenticated terminals to access a VN?
Answer: D
Explanation:
Non-authenticated terminals can access a virtual network by using statically configured VLANs. Such terminals may include printers, cameras, sensors, industrial devices, and other dumb terminals that cannot perform 802.1X, Portal, or comparable interactive authentication. Their access interfaces and service VLANs are therefore configured in advance and mapped to the required VN.
Dynamic VLAN authorization requires a completed authentication or identification process. Normally, an authentication server returns a VLAN or other authorization attribute after validating the user or terminal.
Because the question specifically refers to non-authenticated terminals, dynamically authorizing a VLAN is not the applicable mechanism. The wired-mode and wireless-mode authorization options are likewise associated with authentication-based policy delivery rather than unconditional VN access.
Huawei's VN design guidance states that LAN-side physical interfaces and VLANs are assigned to the appropriate departments or services and then associated with corresponding VRFs or VNs. It also explains that a department may use an independent physical interface or share an interface while maintaining isolation through VLANs. Therefore, configuring a static VLAN is the correct method.
NEW QUESTION # 54
What is the function of the PROFINET DCP?
Answer: B
Explanation:
PROFINET DCP, meaning Discovery and Basic Configuration Protocol, is used during device discovery and initial network configuration. It operates at the data-link layer and enables an engineering station or PROFINET IO controller to locate devices on the local Ethernet segment, identify them by MAC address or station name, assign a PROFINET device name, and configure IP parameters such as the IP address, subnet mask, and default gateway.
DCP is therefore not responsible for normal cyclic process-data exchange. Real-time PROFINET communication performs that function after the controller and I/O device have been configured and an application relationship has been established. Alarm exchange and acyclic parameterization are also handled through other PROFINET communication relationships and services.
The distinction matters during commissioning. A new I/O device may initially have no usable IP configuration. DCP allows the controller or engineering tool to discover it at Layer 2 and provision the identity and addressing information required before higher-layer communication can begin. PROFINET documentation identifies DCP as mandatory for assigning IP addresses and configuring station names on the local network.
NEW QUESTION # 55
The CNN-based application identification technology can identify both known and unknown applications.
Answer: A
Explanation:
The statement is true in the context of Huawei's AI-assisted application-identification architecture.
Conventional identification depends mainly on predefined signatures, fixed destination addresses, port numbers, protocol fields, DNS correlation, or deep packet inspection. Huawei's standard SD-WAN process uses Service Awareness and First-Packet Identification signature databases to identify and group application traffic. These mechanisms are effective for known applications but become less reliable when traffic is encrypted, applications change versions, or previously unseen applications appear.
A CNN-based classifier learns multidimensional traffic characteristics such as packet-length sequences, timing, direction, and flow behavior. It can classify traffic matching learned application patterns and, when implemented with open-set detection, recognize flows outside known classes as unknown or zero-day applications. Commercial-grade deep-learning traffic classification research demonstrates identification of known encrypted applications together with the handling of unknown zero-day applications.
This does not mean the system automatically assigns an exact commercial name to every unseen application.
It detects that the traffic does not match established classes so that it can be investigated, labelled, and incorporated into later model updates. Therefore, the statement is True.
NEW QUESTION # 56
......
Are you still worried about your coming H19-404_V1.0 exam and have no idea what to do? Are you too busy to study with all the books and other broad exam materials which will take you a long time to prapare for your exam? You can just choose to buy our H19-404_V1.0 Exam Questions which have settle all these problems for you. And our pass rate of the H19-404_V1.0 study materials is high as 98% to 100%. Hence they are your real ally for establishing your career pathway and get your potential attested.
H19-404_V1.0 Latest Torrent: https://www.examsreviews.com/H19-404_V1.0-pass4sure-exam-review.html