According to different kinds of questionnaires based on study condition among different age groups, we have drawn a conclusion that the majority learners have the same problems to a large extend, that is low-efficiency, low-productivity, and lack of plan and periodicity. As a consequence of these problem, our H19-404_V1.0 test prep is totally designed for these study groups to improve their capability and efficiency when preparing for H19-404_V1.0 Exams, thus inspiring them obtain the targeted H19-404_V1.0 certificate successfully. Our H19-404_V1.0 question torrent can play a very important part in helping you achieve your dream.
| Section | Weight | Objectives |
|---|---|---|
| Campus Network Technology Design | 25% | - VLAN, IP addressing and routing design - QoS, security and high availability design - WLAN planning, coverage and roaming design |
| Solution Promotion and Project Implementation | 15% | - Solution value analysis and competitive differentiation - Deployment guidance and acceptance criteria |
| Campus Network Planning and Design Fundamentals | 15% | - Network design principles and methodologies - Service requirements and demand analysis - Campus network architecture and evolution |
| Scenario-based Campus Network Design | 25% | - Large campus and multi-branch interconnection design - Small and medium-sized campus network design - Cloud-managed and virtualized campus network design |
| Huawei Campus Network Solutions and Products | 20% | - iMaster NCE-Campus management platform - Switches, WLAN products and AR routers - Xinghe Intelligent Campus Solution overview |
>> H19-404_V1.0 New Dumps Sheet <<
Our Software version of H19-404_V1.0 study materials has the advantage of simulating the real exam. The timing function in this Software of our H19-404_V1.0 guide questions helps them adjust their speeds to answer the questions and the function of stimulating the H19-404_V1.0 Exam can help the learners adapt themselves to the atmosphere and pace of the exam. Thus the learners can master our H19-404_V1.0 practice engine fast, conveniently and efficiently.
NEW QUESTION # 52
It is recommended that policy association be deployed between the access and aggregation layers when distributed VXLAN gateways are used and VXLAN is deployed across the core and aggregation layers.
Answer: B
Explanation:
The statement is true. In this three-layer campus design, aggregation switches function as VXLAN edge nodes and distributed gateways, while access switches provide terminal connectivity. Policy association allows the access switches to participate in user admission and policy enforcement without requiring them to support full VXLAN functions.
The access switch collects terminal access information and associates user traffic with the appropriate service or policy. The aggregation switch, acting as the fabric edge and VXLAN tunnel endpoint, performs VXLAN encapsulation, distributed gateway forwarding, and policy-related operations. Huawei specifically states that when aggregation switches operate as edge nodes, access switches do not need to support VXLAN and can cooperate with aggregation switches through policy association. This also permits legacy access switches to be reused.
The design reduces upgrade costs and avoids extending complex overlay configurations to every access device. Huawei's automated virtual-network deployment model also explicitly includes policy association between the aggregation and access layers, allowing access switches without VXLAN capability to operate as transparent or associated access nodes. Therefore, option A is correct.
NEW QUESTION # 53
Which of the following statements are true about wireless traffic forwarding modes on a fabric wireless network?
Answer: A,B,C,D
Explanation:
All four statements correctly describe the trade-offs between direct and tunnel forwarding. With direct forwarding, an AP sends service traffic directly to the upstream network rather than encapsulating it in a CAPWAP data tunnel to the WAC. This eliminates unnecessary detours, avoids creating a WAC bandwidth bottleneck, reduces WAC load, and generally provides higher forwarding efficiency.
However, on a fabric network, Layer 3 roaming across different edge nodes may require the original edge or another designated device to remain the home agent. The resulting forwarding path and state synchronization can slightly affect roaming performance, making direct forwarding less suitable for extremely roaming- sensitive deployments. Huawei's material explains that after Layer 3 roaming in direct-forwarding mode, traffic may continue to be forwarded through the home agent.
Tunnel forwarding sends AP service traffic through CAPWAP tunnels to the WAC. This simplifies centralized policy enforcement, security control, and traffic management. Its disadvantage is that all wireless traffic may detour through the WAC, increasing forwarding pressure and potentially creating a performance bottleneck.
NEW QUESTION # 54
Which of the following capabilities were introduced with Wi-Fi 7?
Answer: B,C
Explanation:
The capabilities introduced with Wi-Fi 7 are 4096-QAM and channel bandwidth of up to 320 MHz. Wi-Fi 7, based on IEEE 802.11be Extremely High Throughput, doubles the maximum channel width available under Wi-Fi 6 and Wi-Fi 6E from 160 MHz to 320 MHz where sufficient regulatory spectrum is available. It also introduces 4096-QAM, encoding 12 bits per modulation symbol compared with 10 bits for Wi-Fi 6's 1024- QAM. This can increase peak spectral efficiency when the signal-to-noise ratio is sufficiently high.
The other options were available before Wi-Fi 7. Support for up to eight spatial streams existed in earlier IEEE 802.11 generations, and MU-MIMO was already supported before Wi-Fi 7, with major uplink and downlink enhancements delivered by Wi-Fi 6. The 6 GHz band was commercially introduced through Wi-Fi
6E. Huawei's material specifically describes Wi-Fi 6E as extending Wi-Fi 6 into the 6 GHz spectrum. Wi-Fi 7 continues using 6 GHz but did not introduce it. Therefore, only A and C are correct.
NEW QUESTION # 55
In hierarchical networking, which of the following devices is used for communication between different areas?
Answer: A
Explanation:
A border device, or more precisely a device at a border site, provides communication between different areas in a hierarchical SD-WAN topology. The hierarchical model divides a large WAN into multiple areas. Each area can independently use a hub-spoke or full-mesh topology, while selected border sites connect the local area to a centralized backbone area.
When a non-border site receives a route originating in another area, the route's next-hop site ID is changed to the border site in its own area. The local border device then forwards traffic toward the border site in the destination area or toward an interconnected hub site. Ordinary edge devices provide connectivity for their own sites but do not automatically perform cross-area transit.
Huawei describes border sites as members of both the level-2 area network and the level-1 backbone network.
These sites collectively implement interconnection between areas. Huawei further explains that inter-area routes point to border sites and recommends two border sites operating in active/standby mode for reliability.
Therefore, the correct answer is B.
NEW QUESTION # 56
Which of the following SM-series cryptographic algorithms is supported?
Answer: D
Explanation:
SM4 is the supported SM-series cryptographic algorithm intended by this question. SM4 is a standardized symmetric block cipher that uses a 128-bit block size and a 128-bit key. It is suitable for high-volume data encryption because symmetric cryptography can process service traffic efficiently compared with public-key algorithms.
Within an SD-WAN or IPsec context, the bulk traffic carried through secure data channels requires a symmetric encryption algorithm. SM4 can therefore be used as the encryption component of an approved cryptographic suite where compliance with Chinese commercial cryptography requirements is necessary.
SM2 is an asymmetric public-key cryptographic suite used for functions such as digital signatures, key exchange, and public-key encryption. It is not the bulk data-encryption algorithm requested in this item. SM1 is a restricted proprietary algorithm whose implementation details are not publicly standardized in the same manner, while SM5 is not the supported option represented by the Huawei course question.
Huawei's SD-WAN architecture uses IPsec to protect site-to-site services and supports secure GRE-over- IPsec data channels between edge devices. In the SM-series selection presented here, the correct supported traffic-encryption algorithm is SM4.
NEW QUESTION # 57
......
VCE4Plus provides Huawei H19-404_V1.0 desktop-based practice software for you to test your knowledge and abilities. The H19-404_V1.0 desktop-based practice software has an easy-to-use interface. You will become accustomed to and familiar with the free demo for Huawei H19-404_V1.0 Exam Questions. Exam self-evaluation techniques in our H19-404_V1.0 desktop-based software include randomized questions and timed tests. These tools assist you in assessing your ability and identifying areas for improvement to pass the HCSE-Presales-Campus Network Planning and Design V1.0 exam.
New H19-404_V1.0 Test Questions: https://www.vce4plus.com/Huawei/H19-404_V1.0-valid-vce-dumps.html