P.S. Free 2026 Fortinet NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by Real4test: https://drive.google.com/open?id=1r-YdcfOSVEpScTdGgsFwNd-h-76BUZ_F
The Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions are the real, valid, and updated NSEI_OTS_AR-7.6 Exam Questions that are specifically designed for quick and complete NSEI_OTS_AR-7.6 exam preparation. With Real4test Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice test questions you can start Fortinet NSEI_OTS_AR-7.6 exam preparation immediately.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Security automation and threat response - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Authentication and access policies for OT devices - Purdue Model and secure network segmentation |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
>> NSEI_OTS_AR-7.6 Latest Test Questions <<
Actually, most people do not like learning the boring knowledge. It is hard to understand if our brain rejects taking the initiative. Now, our company has researched the NSEI_OTS_AR-7.6 study materials, a kind of high efficient learning tool. Firstly, we have deleted all irrelevant knowledge, which decreases your learning pressure. Then, the difficult questions of the NSEI_OTS_AR-7.6 Study Materials will have vivid explanations. So you will have a better understanding after you carefully see the explanations.
NEW QUESTION # 57
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: C
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 58
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: A,D
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 59
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: B
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 60
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: A
Explanation:
According to the OT Security 7.6 Architect study guide regarding IEC 62443 Security Levels :
* Security Level 4 (SL 4) Definition : This level provides " Protection against intentional violation using sophisticated means with extended resources, specific skills, and high motivation " .
* Real-World Application : The study guide specifically notes: " If you are facing a syndicate of cyber extortionists with extensive resources and capabilities, then you should strive for security level 4 " .
* Comparison to other levels :
* SL 1 : Protection against " casual or unintentional system violation " .
* SL 2 : Protection against " intentional violation using simple means with low resources " .
* SL 3 : Protection against " intentional violation using sophisticated means with moderate resources " .
NEW QUESTION # 61
You want to protect OT devices that are not updated against known vulnerabilities so you apply virtual patching to the firewall policies. What must you check to confirm that the OT devices are virtually patched?
(Choose one answer)
Answer: B
Explanation:
The correct answer is C. The output of the CLI command get rule otvp status . In the Virtual Patching section, the study guide shows the workflow where FortiGate queries FortiGuard for device-specific vulnerabilities, receives OT virtual patching signatures, maps them to the device MAC address, and then explicitly displays the CLI verification command get rule otvp status together with fields such as Rule-name
, Vuln_type , and Cve . This is the direct confirmation mechanism shown in the guide for checking whether OT devices have virtual patching rules associated with them.
The other options are less accurate for confirmation. The OT View page is for Purdue-level visualization, and the Asset Identity List page shows device and asset information, but neither is presented in the guide as the command or control used to verify virtual patching status. The study guide specifically uses get rule otvp status as the status check tied to virtual patching behavior.
NEW QUESTION # 62
......
We will refund your money if you fail to pass the exam if you buy NSEI_OTS_AR-7.6 exam dumps from us, and no other questions will be asked. We are famous for high pass rate, with the pass rate is 98.75%, we can ensure you that you pass the exam and get the corresponding certificate successfully. In addition, NSEI_OTS_AR-7.6 Exam Dumps of us will offer you free update for 365 days, and our system will send the latest version of NSEI_OTS_AR-7.6 exam braindunps to your email automatically. We also have online service stuff, and if you have any questions just contact us.
NSEI_OTS_AR-7.6 Training Questions: https://www.real4test.com/NSEI_OTS_AR-7.6_real-exam.html
P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by Real4test: https://drive.google.com/open?id=1r-YdcfOSVEpScTdGgsFwNd-h-76BUZ_F