All praise and high values lead us to higher standard of NS0-522 practice engine. So our work ethic is strongly emphasized on your interests which profess high regard for interests of exam candidates. Our NS0-522 study materials capture the essence of professional knowledge and lead you to desirable results effortlessly. So let us continue with our reference to advantages of our NS0-522 learning questions.
| Section | Objectives |
|---|---|
| ONTAP SAN implementation and configuration | - Switches and host systems - Clustered storage system FCP configuration tasks - Clustered storage systems and node configuration tasks - Clustered storage system NVMe configuration tasks - Data protection - Clustered storage system iSCSI configuration tasks - Storage space utilization or management concepts - SVM configuration tasks |
| ONTAP SAN Concepts | - Storage controller configuration concepts - Switch and/or host configuration concepts - Data protection concepts - Storage space utilization or management concepts |
| ONTAP SAN solution assessment | - Configuration components using tools - Environmental or physical considerations - Solution design and hardware provisioned to meet customer requirements or expectations - Prerequisites and inventory for the installation of all SAN components during planning |
| ONTAP SAN implementation testing and troubleshooting | - Testing tasks - Troubleshooting tasks - Data migration |
>> Latest NS0-522 Test Notes <<
Therefore, make the most of this opportunity of getting these superb exam questions for the Network Appliance NS0-522 certification exam. We guarantee you that our top-rated NetApp Implementation Engineer - SAN ONTAP Exam practice exam (PDF, desktop practice test software, and web-based practice exam) will enable you to pass the Network Appliance NS0-522 Certification Exam on the very first go.
NEW QUESTION # 90
A customer has recently installed a new NetApp AFF system and Cisco Nexus 9000 Series switches for their SAN workload. The administrator is tasked with configuring interface groups for port-based load balancing.
Which two commands are required? (Choose two.)
Answer: A,C
Explanation:
ONTAP interface groups support several traffic-distribution algorithms, including port, which distributes traffic using transport-layer TCP or UDP port information. Therefore, network port ifgrp create -distr-func port establishes the corresponding ONTAP-side distribution behavior. The connected Cisco Nexus infrastructure should use a compatible port-channel hashing method; NetApp validated architectures show port-channel load-balance src-dst l4port for Nexus switches so source and destination Layer-4 ports contribute to traffic distribution. This improves utilization across member links compared with algorithms using fewer flow attributes. The original V9.02 text contained the typographical string 14port; the correct command parameter is l4port, meaning Layer 4 port. Options C and D do not establish the requested port-based load- balancing algorithm. Relevant SAN ONTAP topics include interface groups, port distribution functions, link aggregation, and Nexus port-channel hashing.
NEW QUESTION # 91
A storage administrator has just completed an ISCSI implementation in a customer environment running VMware and needs to validate that the entire network path supports jumbo frames.
Which action should be taken?
Answer: C
Explanation:
To validate that the entire network path supports jumbo frames after an iSCSI implementation, you should perform a ping test from the host with fragmentation. This involves using the ping command with specific options to test jumbo frame support:
ping -M do -s 8972 < target_IP >
In this command:
* -M do ensures the packets are not fragmented.
* -s 8972 sets the packet size to 8972 bytes (9000 bytes MTU minus 28 bytes for the ICMP header).
By confirming that the large packets are successfully transmitted without fragmentation, you can validate that the network path, including switches and adapters, supports jumbo frames.
For more details, you can check:
* NetApp Documentation - iSCSI Configuration and Best Practices ( NetApp ) ( NetApp ).
NEW QUESTION # 92
What Is modified when moving a LUN between different HA pairs in the same SVM to prevent loss of connectivity?
Answer: B
Explanation:
When moving a LUN between different HA pairs in the same SVM to prevent loss of connectivity, the reporting nodes must be modified. The reporting nodes configuration ensures that the initiator paths are properly updated to reflect the new physical location of the LUN. This prevents disruptions in connectivity by maintaining the correct pathing information for the host systems accessing the LUN.
For more details, refer to:
* NetApp Documentation on LUN Management
NEW QUESTION # 93
A customer is deploying an IP-based SAN on a NetApp AFF All SAN Array (ASA) system. A solution should be used that will increase security and improve reliability.
What is a network best practice for IP-based SAN when implementing AFF ASA infrastructure solutions?
Answer: D
Explanation:
Separate VLANs are a recommended design practice for IP-based SAN traffic because they provide logical network segmentation and enable independent broadcast domains. ONTAP VLANs can separate storage traffic by function or network path even when the underlying physical switching infrastructure is shared. For SAN redundancy, NetApp also recommends separate Ethernet networks and multiple paths so that failure of one network does not eliminate storage connectivity. VLAN separation additionally limits unnecessary broadcast-domain exposure and provides clearer operational boundaries for iSCSI or NVMe/TCP traffic. An MTU of 1500 is supported but does not inherently provide the requested security and reliability improvement, while simply using routed networking is not the relevant SAN best practice. Therefore, separate VLANs provide the appropriate segmentation and path-isolation characteristics for an AFF ASA IP SAN design.
NEW QUESTION # 94
A customer Is deploying a new 8-node NetApp ONTAP cluster for their SAN workloads using FCP, NVMe
/FC, and NVMe/TCP.
In this scenario, which statement is true?
Answer: C
Explanation:
In a NetApp ONTAP cluster using FCP, NVMe/FC, and NVMe/TCP, it is important to understand that NVMe
/FC and FCP require different FC ports. This separation is necessary because the protocols, while both running over Fibre Channel, have different configurations and operational characteristics.
For more information, refer to:
* NetApp Documentation on NVMe Configuration
* NetApp Best Practices for SAN
NEW QUESTION # 95
......
The supremacy of ITExamDownload in the tech sector solely relies on its competency to offer its users updated and real NS0-522 exam dumps. Our dedicated team takes feedback from experts all around the world to update its NS0-522 actual dumps. This practice material will make your preparation for the Network Appliance NS0-522 examination super easy and effective.
Test NS0-522 Centres: https://www.itexamdownload.com/NS0-522-valid-questions.html