あなたは弊社の商品を買ったら一年間に無料でアップサービスが提供されたAPI-SIEE認定試験に合格するまで利用しても喜んでいます。もしテストの内容が変われば、すぐにお客様に伝えます。弊社はあなた１００％API-SIEE合格率を保証いたします。
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
当社APIが採用した「小利益」の方針により、すべてのお客様と当社の間で双方に有利な状況を達成することを目指しているため、API-SIEEのすべてのお客様の信頼を獲得することができました。 当社CertJukenが長年にわたってこのAPI-SIEE試験問題の分野で業界のリーダーになっており、当社のAPI-SIEE試験のSource Inspector Electrical Equipment教材が世界中でこんなに迅速に販売されているにもかかわらず、手頃な価格を維持しているのはそのためです。 すべてのお客様向けのAPI-SIEE学習ガイドであり、有名なブランドを活用したくない。
質問 # 38
According to ANSI/IEEE C37.20.2, wiring across a hinge shall be all of the following except:
正解：D
解説：
The correct answer isBbecause ANSI and IEEE requirements for control wiring that passes across hinged doors or panels in metal-enclosed switchgear emphasizemechanical flexibility, proper looping, securement, and suitable conductor stranding, not installation in a flexible non-metallic conduit with a separate grounding conductor as described in option B. The standard intent is to ensure that repeated opening and closing of doors does not damage the conductor strands or insulation, and that stress is not transmitted beyond the supported points. That is why optionsAandCreflect accepted requirements: the wiring must be flexible enough for repeated motion and arranged in a formed loop with proper securement. OptionDis also consistent with switchgear wiring practice, where conductor size and stranding class are specified to provide durability under mechanical movement.
OptionBadds conditions that are not the stated requirement for wiring across a hinge in ANSI/IEEE C37.20.2.
In source inspection, this distinction matters because inspectors must verify wiring methods against the actual standard requirement rather than accept added but non-required installation details.
質問 # 39
What standard defines the maximum number of conductors permitted in outlets, devices and junction boxes, and conduit bodies?
正解：D
解説：
The correct answer isAbecauseNFPA 70, the National Electrical Code, is the standard that defines conductor fill requirements foroutlet boxes, device boxes, junction boxes, and conduit bodies. These rules are commonly calledbox filland are intended to prevent overcrowding, overheating, insulation damage, and unsafe bending or termination conditions inside enclosures. NFPA 70 provides the method for determining how many conductors are permitted based on conductor size, internal volume, devices, fittings, equipment grounding conductors, and similar factors. This is exactly the type of requirement a source inspector or quality- surveillance professional must verify when reviewing fabricated electrical assemblies and associated installation details.
The other options do not fit this requirement.IEEE 112relates to electric motor testing,IEC 60079 seriesapplies to explosive atmospheres and hazardous locations, andNEMA 250covers enclosure classifications and environmental protection types rather than conductor-fill limits. In API-aligned inspection practice, the inspector confirms that junction boxes and related electrical assemblies comply with the applicable governing codes and referenced standards. For conductor count limits in boxes and conduit bodies, the governing standard isNFPA 70.
質問 # 40
Which of the following tools is used for inspection of coating?
正解：C
解説：
The correct answer isAbecause the most common and direct inspection instrument used for acoating after applicationis thedry film thickness DFT gauge. In source inspection and quality surveillance, coating verification typically includes checking whether the applied paint or protective coating has achieved the specified thickness range. That is a fundamental acceptance point because coating that is too thin may fail prematurely, while coating that is too thick may crack, blister, or cure improperly. In practical inspection language, the option says "Dry film thickness DFT," but it clearly refers to theDFT measuring gauge/toolused by inspectors.
The other options are related but not the best answer. Adigital surface profile gaugeandsurface profile replica tapeare mainly used to evaluate thesurface profile of blasted steel before coating, not the final dry coating thickness itself. Anultrasonic thickness meteris generally used for base material wall thickness measurement, not routine paint-coating inspection. The API guide covers source inspection and surveillance of manufacturing activities and stresses verification against specifications, records, and inspection points for covered equipment.
質問 # 41
According to API 541, totally enclosed machines TEFC, TEPV, TEWAC, and TEAAC are equipped with which of the following?
正解：D
解説：
The correct answer isA. Under API 541,totally enclosed machinessuch asTEFC, TEPV, TEWAC, and TEAACare required to have alow-point drain. This requirement exists because enclosed motors can accumulatecondensation or moistureinside the housing due to temperature changes, shutdown periods, ambient humidity, or cooling system operation. If that moisture is not removed, it can degrade insulation, promote corrosion, contaminate internal parts, and shorten motor life. The low-point drain provides a controlled path for accumulated liquid to escape from the lowest part of the enclosure.
The other options are not universally required for all these enclosure types. Aheat exchanger cooling fanmay apply only to certain cooling arrangements, not to every totally enclosed machine listed.Bearing RTDsmay be specified for monitoring on many large motors, but they are not the defining common feature identified by this question.Surge protectorsare auxiliary protective devices and are not the standard enclosure-related requirement here. In source inspection practice, the inspector should verify that the motor enclosure includes the requireddrain provisions, that they are properly located, and that they conform to the approved design and specification.
質問 # 42
Inspections, examinations, and tests must be performed in accordance with the source Inspection Test Plan, project specification, applicable codes and standards and meet:
正解：C
解説：
The correct answer isCbecause inspections, examinations, and tests are only meaningful when their results are evaluated against definedacceptance criteria. In source inspection, the Source Inspection Test Plan, project specification, purchase order requirements, and applicable codes and standards establish not only what must be inspected or tested, but also the exact criteria that determine whether the item is acceptable. Without acceptance criteria, inspection results cannot be dispositioned objectively as pass, fail, conforming, or nonconforming.
The other options are not sufficient.Published catalog datamay provide general product information, but it is not always the contractual or governing basis for acceptance. Amanufacturer's standardmay be used internally, but it cannot override purchaser requirements or applicable codes unless specifically approved.
Commonly accepted industry practicemay guide methods, but acceptance decisions must still be based on the specified requirements and stated limits. The API guide emphasizes that it is focused onsource inspection and quality surveillance activitiesand on verification against applicable requirements rather than informal judgment alone. Therefore, inspections and tests must meetthe applicable acceptance criteria, makingoption Cthe verified answer.
質問 # 43
......
API-SIEEガイドトレントの3つの異なるバージョンの中で最も普及しているのはPDFバージョンであり、APIは特に適切であり、若者に歓迎されていることは間違いありません。このバージョンにはいくつかの機能があります。まず、API-SIEE準備ガイドのPDFバージョンを紙に印刷できます。ただし、メモを作成して重要な試験ポイントを強調することができます。前述のように、API-SIEE試験トレントサポート無料のデモダウンロードに加えて、API-SIEE準備ガイドを十分に理解し、適切で満足できる場合は購入することが理想的です。
API-SIEE的中率: https://www.certjuken.com/API-SIEE-exam.html