NRN-522최신덤프자료완벽한덤프공부문제

Fast2test사이트에서 제공해드리는 Nokia NRN-522덤프는 실러버스의 갱신에 따라 업데이트되기에 고객님께서 구매한Nokia NRN-522덤프가 시중에서 가장 최신버전임을 장담해드립니다. Nokia NRN-522덤프의 문제와 답을 모두 기억하시면Nokia NRN-522시험에서 한방에 패스할수 있습니다.시험에서 불합격 받으시면 결제를 취소해드립니다.

Nokia NRN-522 Exam Syllabus Topics:

SectionObjectives
Topic 1: Configuration Management- Parameter Administration
  • 1. Applying standard parameter configuration changes
  • 2. Remote configuration management
Topic 2: 5G RAN Products and Solutions Management- Network Connectivity and Access
  • 1. Connecting to Nokia 5G RAN products
  • 2. Accessing and managing network elements remotely
Topic 3: Fault and Alarm Management- Monitoring and Troubleshooting
  • 1. Retrieving faults and alarms
  • 2. Analyzing operational issues
  • 3. Performing corrective actions
Topic 4: Software Management- Base Station Software Operations
  • 1. Software maintenance and updates
  • 2. Managing 5G base station software
Topic 5: Remote Operations of 5G Radio Access Networks- 5G RAN Operations Center Procedures
  • 1. Operational workflows in a Network Operations Center
  • 2. Remote network operations concepts

>> NRN-522최신 덤프자료 <<

Nokia NRN-522덤프공부자료, NRN-522최신 덤프문제보기

Fast2test의Nokia NRN-522시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷합니다. 우리의 짧은 학습가이드로 빠른 시일 내에 관련지식을 터득하여 응시준비를 하게 합니다. 우리는 우리의Nokia NRN-522인증시험덤프로 시험패스를 보장합니다.

최신 Nokia 5G NRN-522 무료샘플문제 (Q109-Q114):

질문 # 109
Within NetAct, which functional module is primarily responsible for planning, distributing, and activating software packages across base stations?

정답：C

설명：
The Software Management (SWM) module within NetAct is the centralized functional area responsible for the end-to-end software lifecycle of base stations and other network elements, including planning software deployment campaigns, distributing (downloading) software packages to target network elements, scheduling and triggering activation, and monitoring the success or failure of these operations across potentially large numbers of sites. This is distinct from Fault Management (FM), which handles alarms and fault conditions; Performance Management (PM), which handles KPI and counter-based performance data; and Configuration Management (CM), which handles parameter and configuration provisioning. While these modules may interact - for example, a software activation might generate alarms visible in FM, or a software change might necessitate subsequent configuration adjustments via CM - the core responsibility for managing software packages, versions, and activation campaigns rests specifically with SWM, making it the primary tool a NOC engineer would use for software lifecycle activities.


질문 # 110
How is the Cell Availability KPI typically calculated for a reporting period, and what does this KPI primarily reflect?

정답：B

설명：
Cell Availability is an Availability-category KPI that measures the proportion of a given reporting period during which a cell was operationally able to carry traffic - that is, unlocked, in service, and not blocked by a fault. It is calculated as the ratio of the time the cell was actually available to the total duration of the reporting period, expressed as a percentage. Periods of planned maintenance (administrative locking) are sometimes excluded or tracked separately from unplanned outages, depending on operator reporting policy, since the two have different operational implications. This KPI is critical for service level agreement (SLA) reporting and for identifying cells with recurring stability issues such as repeated automatic resets, hardware faults, or transport outages. It is distinct from throughput-based, handover-based, or alarm-count-based ratios, which belong to other KPI categories and answer different operational questions.


질문 # 111
A NOC engineer is preparing to remotely change a cell's duplex mode configuration from FDD to TDD. What critical dependency must be verified before this change can be successfully applied?

정답：A

설명：
TDD (Time Division Duplex) operation requires precise time synchronization between cells, because uplink and downlink transmissions share the same frequency but are separated in time according to a coordinated frame structure. If neighboring TDD cells are not tightly synchronized, their uplink and downlink slots can overlap, causing severe cross-interference between cells. Before converting a cell's duplex mode to TDD, it is therefore critical to verify that the site has access to a reliable, accurate timing/synchronization reference - typically GNSS (such as GPS) or a network-based reference distributed via PTP (Precision Time Protocol) - and that the synchronization source is stable and within required accuracy limits. FDD (Frequency Division Duplex), by contrast, uses separate frequencies for uplink and downlink and does not have this same stringent synchronization dependency. SFTP connectivity, PLMN matching, and alarm acknowledgment status, while operationally relevant in general, are not the critical technical dependency specific to a duplex mode change.


질문 # 112
In NetAct Performance Management, what is a 'measurement job'?

정답：C

설명：
In NetAct Performance Management, a 'measurement job' is a configured task that specifies which performance counters or KPIs should be collected, from which network elements (such as specific base stations or cells), and at what collection interval - for example, every 15 minutes or hourly. These jobs are the mechanism by which raw counter data is gathered from the RAN and made available for KPI calculation, reporting dashboards, and threshold-based alerting. Without properly configured measurement jobs covering the relevant counters and elements, the performance data needed to assess network health and detect KPI degradation would simply not be collected. This is distinct from a field technician's scheduled maintenance task, a software upgrade package (a Software Management concept), or a user account (an access control concept) - a measurement job specifically governs the automated, ongoing collection of performance statistics within the PM functional area.


질문 # 113
Which NetAct functional area provides tools that allow an operator to apply the same parameter change consistently to multiple AirScale base stations or cells in a single operation?

정답：C

설명：
NetAct's Configuration Management (CM) area provides bulk/mass update capabilities that let an operator define a parameter change once - such as updating a neighbor relation, adjusting a power parameter, or enabling a feature - and apply it consistently across many base stations or cells in a single, auditable operation. This is fundamental to standard provisioning tasks covered in remote operations, allowing large- scale configuration rollouts without logging into each element individually, while maintaining consistency and an audit trail of who changed what and when. Fault Management focuses on collecting, displaying, and correlating alarms rather than making configuration changes. Performance Management focuses on collecting and reporting KPI/counter data. Software Management can distribute and activate software packages across multiple base stations, but it does not handle parameter and configuration provisioning, which is the specific domain of Configuration Management's bulk operations tools.


질문 # 114
......

여러분은 우리. Fast2test의Nokia NRN-522시험자료 즉 덤프의 문제와 답만 있으시면Nokia NRN-522인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. Fast2test의 덤프를 장바구니에 넣으세요. 그리고 Fast2test에서는 무료로 24시간 온라인상담이 있습니다.

NRN-522덤프공부자료: https://kr.fast2test.com/NRN-522-premium-file.html