Perhaps you are in a bad condition and need help to solve all the troubles. Don’t worry, once you realize economic freedom, nothing can disturb your life. Our Implementing and Operating Cisco Wireless Core Technologies study materials can help you out. Learning is the best way to make money. So you need to learn our 350-101 study materials carefully after you have paid for them. As long as you are determined to change your current condition, nothing can stop you. Once you get the 350-101 certificate, all things around you will turn positive changes. Never give up yourself. You have the right to own a bright future.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
>> Reliable 350-101 Test Practice <<
Our website offer standard 350-101 practice questions that will play a big part in the certification exam. Valid 350-101 exam answers and questions are fully guaranteed and enough for you to clear test easily. Free demo of 350-101 Dumps PDF allowing you to try before you buy and one-year free update will be allowed after purchased. Please feel free to contact us if you have any questions about our dumps files.
NEW QUESTION # 59
What is used for measuring gain on a Wi-Fi antenna?
Answer: A
Explanation:
Wi-Fi antenna gain is measured in dBi, meaning decibels referenced to an isotropic radiator.
Cisco's Wireless RF Reference Guide states that antennas have gain measured in decibels relative to isotropic gain, or dBi, and further explains that antenna gain is a ratio comparing the gain of a specific antenna to a theoretical isotropic antenna. Cisco's RF design documentation also defines dBi as the power gain rating of antennas, where real antennas are compared to an isotropic antenna that radiates the same power density equally in all directions.
Option B is therefore the correct selection, although the technically precise phrase is decibels relative to isotropic, abbreviated dBi. Antenna length can influence resonance and design, but it is not the measurement unit for gain. Voltage against dBm is incorrect because dBm references absolute power relative to 1 milliwatt, not antenna gain. Analog/digital signal blending is unrelated to RF antenna performance.
NEW QUESTION # 60
A network administrator at a marketing company manages a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The WLAN named XYZ-Guest is set up for visitors, and the administrator wants to implement a web authentication (WebAuth) portal using an external server to manage guest access. To ensure seamless and secure guest authentication, the controller must be configured to use an external WebAuth server for the WLAN. The administrator must configure the XYZ-Guest WLAN to use an external WebAuth server with a parameter map named webauth-ext. Which set of Cisco IOS XE commands must be used?
Answer: D
Explanation:
On a Cisco Catalyst 9800 WLC, the WLAN is entered with the wlan command, and the WebAuth parameter map is applied under the WLAN using the security web-auth parameter-map command so the guest WLAN uses the configured external WebAuth portal settings.
NEW QUESTION # 61
Refer to the exhibit.
A network administrator is working on a WLC to enable user access for contractor desktops using WPA2- Enterprise using EAP-TTLS. The administrator verified the external authentication configuration and now must test network connectivity. Which code snippet must be added to the box in the code to complete the configuration on the WLC that supports authentication with an external server?
Answer: D
Explanation:
The missing command must create the RADIUS server group context before the existingserver name external- radiuscommand can bind the defined RADIUS server into that group. Cisco's Catalyst 9800 802.1X configuration workflow shows the exact CLI sequence: define the RADIUS server, then enteraaa group server radius < radius-grp-name > , then addserver name < radius-server-name > . The Catalyst 9800 configuration guide likewise states that the RADIUS server-group identification is created withaaa group server radius server-group, followed by the server name assignment.
In this exhibit,external-radiusis already declared underradius server, andaaa authentication dot1x CLIENT_GROUP group RADIUS-GRPalready points the 802.1X method list to the server group namedRADIUS-GRP. Therefore, the box must containaaa group server radius RADIUS-GRPso thatserver name external-radiusis syntactically valid and functionally associates the external server with the group. Cisco also identifies dot1x authentication lists as the AAA method type used for 802.1X SSIDs, with "group" directing authentication to an external RADIUS server. Reference topics:Client Connectivity Configuration
- WPA2-Enterprise, 802.1X/EAP, AAA method lists, RADIUS server groups, and Catalyst 9800 WLAN security
NEW QUESTION # 62
Exhibit:
Refer to the exhibit. A network administrator is working on a WLC to enable user access for employee tablets using PEAP-MSCHAPv2 with a RADIUS backend. The administrator verifies the external authentication configuration and plans to test network connectivity. Which code snippet must be added to the configuration for the WLC to support authentication with an external server?
Answer: A
Explanation:
The missing command isradius server external-radius. On a Catalyst 9800 WLC, the external RADIUS server object must be declared first with radius server < server-name > . The following lines, address ipv4
10.10.10.100 auth-port 1812 acct-port 1813 and key radiuskey, are subcommands entered under that RADIUS server configuration mode. Cisco's Catalyst 9800 802.1X configuration workflow starts by declaring the RADIUS server, then adding it to a RADIUS server group, then creating the authentication method list, and finally mapping that list to the WLAN. Cisco's configuration guide example uses the same IOS XE structure:
radius server < name > , followed by address ipv4 ... auth-port 1812 acct-port 1813 and key ....
The server group later references server name external-radius, so the RADIUS server object must be namedexternal-radiusexactly. Option C would incorrectly create a server named RADIUS-GRP, which is already the AAA server group name, not the RADIUS server object. Options B and D are invalid IOS XE syntax. PEAP-MSCHAPv2 itself is handled through the 802.1X/EAP exchange with the RADIUS server; the WLC acts as the authenticator and forwards authentication requests through the configured AAA method list.
Reference topic:Client Connectivity Configuration - WPA2-Enterprise, 802.1X, RADIUS server objects, AAA groups, and WLAN authentication-list binding.
NEW QUESTION # 63 
A network administrator is working on a Cisco Catalyst 9800 WLC running Cisco IOS XE Software to enable user access for staff smartphones using WPA2-Enterprise with RADIUS. The administrator verifies the external authentication configuration and plans to test network connectivity. Which configuration command must be added to the box in the code to configure the WLC to support authentication with an external server?
Answer: D
Explanation:
To enable WPA2-Enterprise with RADIUS authentication on a Cisco Catalyst 9800 WLC, the WLAN configuration must specify the use of 802.1X as the authentication mechanism. The commandsecurity wpa wpa2 akm dot1xexplicitly instructs the WLAN to use WPA2 encryption with the 802.1X authentication key management (AKM), which leverages the configured RADIUS server group for client authentication. Option B (security dot1x authentication-list) and Option C (security dot1x method-list) are legacy or IOS-style commands that define AAA method lists but do not directly bind the WLAN to WPA2-Enterprise security.
Option A (security wpa enable) only enables WPA but does not define the authentication mode or RADIUS integration, which is insufficient for WPA2-Enterprise deployments. Cisco Wireless design guides emphasize that for staff or enterprise-class WLANs using external RADIUS servers, the WLAN's security profile must use WPA2 with AKM set to 802.1X. This ensures clients perform EAP authentication with the external server, supporting secure credential exchange and proper authorization. Correctly applyingsecurity wpa wpa2 akm dot1xin the WLAN configuration guarantees the WLC enforces encryption and authentication policies in line with enterprise security requirements. Reference topics:Client Connectivity Configuration - WPA2- Enterprise, 802.1X, AKM, RADIUS integration on Cisco WLCs.
NEW QUESTION # 64
......
The Fast2test Implementing and Operating Cisco Wireless Core Technologies (350-101) exam dumps are being offered in three different formats. All these three 350-101 exam dumps formats contain the real Cisco 350-101 exam questions that will help you to streamline the 350-101 Exam Preparation process. The Fast2test Cisco 350-101 PDF dumps file is a collection of real, valid, and updated 350-101 practice questions that are also easy to install and use.
New 350-101 Exam Questions: https://www.fast2test.com/350-101-premium-file.html