Latest Nokia SRAN-Radio-Network-Performance-Optimization Exam Pass4sure - SRAN-Radio-Network-Performance-Optimization Accurate Prep Material

P.S. Free 2026 Nokia SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by EduDump: https://drive.google.com/open?id=1RDAmoJuGIETqYs6rNXzm_8vQ2_pm9LCi

As the authoritative provider of SRAN-Radio-Network-Performance-Optimization learning materials, we can guarantee a high pass rate compared with peers, which is also proved by practice. Our good reputation is your motivation to choose our learning materials. We guarantee that if you under the guidance of our SRAN-Radio-Network-Performance-Optimization learning materials step by step you will pass the exam without a doubt and get a certificate. Our learning materials are carefully compiled over many years of practical effort and are adaptable to the needs of the exam. We firmly believe that you cannot be an exception. Choosing our SRAN-Radio-Network-Performance-Optimization Study Material actually means that you will have more opportunities to be promoted in the near future.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

Section	Weight	Objectives
Advanced Optimization and SON Features	10%	- Self-Organizing Networks (SON) use cases and optimization - Energy saving and advanced features
Coverage and Capacity Optimization	30%	- Interference analysis and mitigation techniques - Capacity planning, load balancing and optimization - Coverage analysis, tuning and optimization
SRAN Performance Optimization Fundamentals	25%	- Key performance indicators (KPIs) definition and measurement - Performance optimization principles and methodology - Network performance monitoring and analysis tools
Mobility and Handover Optimization	20%	- Handover parameters and algorithms - Mobility robustness and optimization - Inter-RAT mobility and optimization
Quality of Service and Resource Management	15%	- QoS parameters, scheduling and admission control - Radio resource management and optimization

>> Latest Nokia SRAN-Radio-Network-Performance-Optimization Exam Pass4sure <<

SRAN-Radio-Network-Performance-Optimization Accurate Prep Material & Examcollection SRAN-Radio-Network-Performance-Optimization Free Dumps

Consistent practice with it relieves exam stress and boosts self-confidence. The web-based SRAN-Radio-Network-Performance-Optimization practice exam does not require additional software installation. All operating systems also support this MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) practice test. We update our MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) pdf format regularly so keep calm because you will always get updated MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) questions.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q11-Q16):

NEW QUESTION # 11
What is the role of admission control in 5G networks ?

A. To check whether there are enough resources for new connections
B. To manage the modulation schemes
C. To increase the spectral efficiency
D. To optimize the downlink throughput

Answer: A

NEW QUESTION # 12
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?

A. 0
B. 1
C. 2
D. 3

Answer: D

Explanation:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.

NEW QUESTION # 13
During an intra-gNB DU handover , what is the role of the RRC Reconfiguration message sent by the gNB- CU to the UE?

A. It transfers user-plane resources and allocates a dedicated preamble index.
B. It confirms admission control and suspends UE scheduling in the source cell.
C. It reestablishes the RLC layer and recovers PDCP PDUs for uplink data.
D. It instructs the UE to perform handover to the target PCell and provides measurement configuration.

Answer: D

Explanation:
The correct answer is A .
During an intra-gNB DU handover , the UE is moved from one cell/DU resource to another under the same gNB-CU control. The gNB-CU coordinates the handover preparation and sends an RRC Reconfiguration message to the UE.
The role of this message is to provide the UE with the required handover command information, such as:
Target PCell configuration
Radio resource configuration
Mobility control information
Random access configuration, when needed
Measurement or reconfiguration-related information
After receiving the RRC Reconfiguration , the UE performs the handover execution procedure toward the target cell and later responds with RRC Reconfiguration Complete .
Option B is incorrect because admission control and source-cell scheduling suspension are internal network- side procedures, not the UE-facing role of the RRC Reconfiguration message.
Option C is not the best answer because user-plane resource transfer is handled between gNB-CU/gNB-DU functions, while dedicated preamble allocation may be part of the configuration but is not the main purpose of the message.
Option D is incorrect because RLC reestablishment and PDCP recovery are lower-layer/user-plane handling actions, not the primary purpose of the RRC Reconfiguration message.
Therefore, the correct role is:
It instructs the UE to perform handover to the target PCell and provides measurement/configuration information.

NEW QUESTION # 14
Consider that the UE is performing handover from LTE to NR with the help of features CB007742 / CB008731 . Referring to the picture below, at what stage can the handover be triggered from LTE to NR?

A. From Stage 3
B. From Stage 2
C. From Stage 4
D. None of the above

Answer: A

Explanation:
The correct answer is C: From Stage 3 .
In LTE-to-NR mobility, the handover or redirection decision is normally based on a combination of:
LTE serving-cell signal level becoming weak enough, and
NR neighbor-cell signal level becoming strong enough.
From the diagram:
In Stage 1 , LTE is still good and NR is still weak, so LTE-to-NR HO should not be triggered.
In Stage 2 , the NR neighbor signal is improving, but the required combined LTE/NR mobility condition is not yet fully satisfied.
In Stage 3 , the NR neighbor signal has crossed the required NR threshold, while the LTE serving-cell signal has degraded enough to justify moving the UE from LTE to NR. This is the first valid stage where LTE-to- NR HO can be triggered.
In Stage 4 , NR is already clearly strong, but the handover could already have been triggered earlier in Stage 3.

NEW QUESTION # 15
Evaluate the impact of extended FR2 cell range on power consumption.

A. It reduces power consumption by optimizing beamforming.
B. It has no impact on power consumption.
C. It increases power consumption because UEs need more energy to transmit uplink signals.
D. It decreases power consumption due to better radio conditions.

Answer: C

Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.

NEW QUESTION # 16
......

EduDump is committed to offering the best value for your investment. For this purpose, EduDump is offering a 100 percent SRAN-Radio-Network-Performance-Optimization Exams passing money-back guarantee. Whether you buy MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 SRAN-Radio-Network-Performance-Optimization Pdf Dumps file, desktop practice test software, and web-based practice test software or all formats, your investment is secured.

SRAN-Radio-Network-Performance-Optimization Accurate Prep Material: https://www.edudump.com/exams/Nokia/SRAN-Radio-Network-Performance-Optimization/

2026 Latest EduDump SRAN-Radio-Network-Performance-Optimization PDF Dumps and SRAN-Radio-Network-Performance-Optimization Exam Engine Free Share: https://drive.google.com/open?id=1RDAmoJuGIETqYs6rNXzm_8vQ2_pm9LCi