100-150 Prüfungsguide: Cisco Certified Support Technician (CCST) Networking & 100-150 echter Test & 100-150 sicherlich-zu-bestehen

Laden Sie die neuesten ZertFragen 100-150 PDF-Versionen von Prüfungsfragen kostenlos von Google Drive herunter: https://drive.google.com/open?id=1hXmRh62JHLHJPVI3E_qdfelQmxTnptpG

Mit Hilfe der Schulungsunterlagen zur Cisco 100-150 Zertifizierungsprüfung können Sie ganz schnell und leicht die Prüfung bestehen. Das haben viele Kandidaten uns gesagt. Mit den Schulungsunterlagen zur Cisco 100-150 Zertifizierungsprüfung können Sie Ihre Gedanken ordnen und sich ganz gelassen auf die Prüfung vorbereiten. Das reduziert nicht nur Stress, sonder hilft Ihnen, die Cisco 100-150 Prüfung zu bestehen. ZertFragen hat auch kostenlose Fragen und Antworten als Probe. Meines Erachtens nach können Sie die Demo zuerst benutzen, dann wird sie Ihnen ganz passen. Sie werden selber ihre Wirkung kennen.

Cisco 100-150 Prüfungsplan:

ThemaEinzelheiten
Thema 1
  • Infrastructure: Covers hands-on identification of Cisco hardware, physical cabling in network setups, port types, and the basic concepts behind routing and switching.
Thema 2
  • Standards and Concepts: Covers foundational networking models, terminology, network types, cloud service models, and common application-layer protocols.
Thema 3
  • Security: Covers firewall traffic filtering, core security principles including CIA and AAA, and basic wireless security configuration on home routers.
Thema 4
  • Addressing and Subnet Formats: Covers the distinction between public and private IP addressing, IPv4 subnetting, and IPv6 address and prefix formats.

>> 100-150 Testfagen <<

100-150 Musterprüfungsfragen - 100-150Zertifizierung & 100-150Testfagen

ZertFragen steht Ihnen ein umfassendes und zuverlässiges Konzept zur Cisco 100-150 Zertifizierungsprüfung zur Verfügung. Unser Konzept bietet Ihnen eine 100%-Pass-Garantie. Außerdem bieten wir Ihnen einen einjährigen kostenlosen Update-Service. Sie können im Internet kostenlos die Software und Prüfungsfragen und Antworten zur Cisco 100-150 Zertifizierungsprüfung als Probe herunterladen.

Cisco Certified Support Technician (CCST) Networking 100-150 Prüfungsfragen mit Lösungen (Q88-Q93):

88. Frage
Hotspot Question
For each statement about bandwidth and throughput, select True or False.
Note: You will receive partial credit for each correct selection.

Antwort:

Begründung:

Explanation:
Bandwidth is the network's capacity, while latency is the delay in transmission, so low bandwidth does not by itself increase latency. High latency does not change the actual bandwidth of a link, but it can reduce how efficiently data is delivered. Reducing latency can improve the rate of successful data delivery, which increases throughput.


89. Frage
Your company has 20 Cisco switches throughout its building.
You need to view the configuration of each switch from the command line.
Which protocol should you use?

Antwort: C

Begründung:
SNMP is an application-layer protocol used to monitor and manage network devices, including routers, switches, firewalls, and wireless access points.
SNMP operates using three primary components: an SNMP manager, an SNMP agent, and a Management Information Base (MIB).
An administrator can query multiple Cisco switches using SNMP-compatible command-line utilities or a centralized Network Management System (NMS).
SNMP supports retrieving device information, monitoring interface statistics, examining operational parameters, and verifying selected configuration attributes through MIB objects.
However, an important distinction applies: SNMP does not provide an interactive Cisco IOS command-line session. If the requirement is to log in to every switch and execute show running-config, SSH is the appropriate secure remote-access protocol. SSH is not offered among the answer choices.
Why the other options are incorrect:
B). RDP: Provides graphical remote desktop access rather than native Cisco IOS CLI access.
C). SMTP: Handles email transmission between mail systems.
D). FTP: Transfers files, including exported configurations, but does not provide interactive switch management.
Therefore, A is the closest intended answer, provided that viewing configuration means retrieving management information through SNMP. For direct command-line configuration inspection, the question should offer SSH.
Cisco Learning Network+1
References:
Cisco CCST Networking (100-150) Official Cert Guide - Chapter 21: Troubleshooting Methods; Chapter
23: Network Device Command-Line Tools.
Cisco CCST Networking Exam Topics - Objective 5.4: Remote Access and Network Management Systems.
Cisco Management Configuration Guide - Simple Network Management Protocol.
Cisco Catalyst Security Configuration Guide - Configuring Secure Shell (SSH).


90. Frage
DRAG DROP
Move each protocol from the list on the left to its correct example on the right.

Antwort:

Begründung:

Explanation:
The correct matching of the protocols to their examples is as follows:
DHCP: Assign the reserved IP address 10.10.10.200 to a web server at your company.
DNS: Perform a query to translate companypro.net to an IP address.
ICMP: Perform a ping to ensure that a server is responding to network connections.
Here's how each protocol corresponds to its example:
DHCP (Dynamic Host Configuration Protocol) is used to assign IP addresses to devices on a network.
In this case, DHCP would be used to assign the reserved IP address 10.10.10.200 to a web server.
DNS (Domain Name System) is used to translate domain names into IP addresses. Therefore, to translate companypro.net to an IP address, DNS would be utilized.
ICMP (Internet Control Message Protocol) is used for sending error messages and operational information indicating success or failure when communicating with another IP address. An example of this is using the ping command to check if a server is responding to network connections.
These protocols are essential for the smooth operation of networks and the internet.
Perform a query to translate companypro.net to an IP address.
DNS (Domain Name System): DNS is used to resolve domain names to IP addresses.
Assign the reserved IP address 10.10.10.200 to a web server at your company.
DHCP (Dynamic Host Configuration Protocol): DHCP is used to assign IP addresses to devices on a network.
Perform a ping to ensure that a server is responding to network connections.
ICMP (Internet Control Message Protocol): ICMP is used by network devices to send error messages and operational information, and it is the protocol used by the ping command.
DNS (Domain Name System): DNS translates human-friendly domain names like "companypro.net" into IP addresses that computers use to identify each other on the network.
DHCP (Dynamic Host Configuration Protocol): DHCP automatically assigns IP addresses to devices on a network, ensuring that no two devices have the same IP address.
ICMP (Internet Control Message Protocol): ICMP is used for diagnostic or control purposes, and the ping command uses ICMP to test the reachability of a host on an IP network.
Reference: DNS Basics: What is DNS?
DHCP Overview: What is DHCP?
ICMP and Ping: Understanding ICMP


91. Frage
HOTSPOT
You purchase a new Cisco switch, turn it on, and connect to its console port. You then run the following command:

For each statement about the output, select True or False. Note: You will receive partial credit for each correct selection.

Antwort:

Begründung:

Explanation:
The two interfaces are administratively shut down:
False: The output does not show any "shutdown" command under the interfaces, which would indicate that they are administratively shut down. Therefore, they are likely in their default state, which is administratively up.
The two interfaces have default IP addresses assigned:
False: The output does not show any IP address configuration. In the default state, interfaces do not have IP addresses assigned unless explicitly configured.
The two interfaces can communicate over Layer 2:
True: By default, interfaces on a switch are Layer 2 interfaces capable of forwarding Ethernet frames. As there is no configuration provided that changes this, it can be assumed they can communicate over Layer 2.
Interface Status: The absence of the "shutdown" command means the interfaces are not administratively shut down.
IP Address Assignment: There is no evidence in the output that IP addresses have been assigned to the interfaces, which would typically be shown as "ip address" entries.
Layer 2 Communication: Switch interfaces in their default state operate at Layer 2, enabling them to forward Ethernet frames and participate in Layer 2 communication.
Reference: Cisco IOS Interface Configuration: Cisco Interface Configuration
Understanding Cisco Switch Interfaces: Cisco Switch Interfaces


92. Frage
Move the protocols on the left to their characteristics on the right. Each protocol may be used once, more than once, or not at all.
Note: You will receive credit for each correct answer.

Antwort:

Begründung:

Explanation:
* SFTP
* SFTP
* TFTP
* TFTP
1. SFTP - SSH Key Authentication
Secure File Transfer Protocol (SFTP) operates over Secure Shell (SSH). It supports cryptographic authentication using SSH keys. Server host-key verification helps clients authenticate the intended server and detect impersonation attempts. Public-key authentication can also verify client identities before access is granted.
2. SFTP - Secure File Transfers Using Port 22
SFTP commonly uses TCP port 22, the default port for SSH. It protects transferred information through encryption and cryptographic integrity mechanisms. These protections help prevent unauthorized disclosure and detect data modification during transmission.
Unlike ordinary FTP or TFTP, SFTP provides secure file transfer through an authenticated SSH connection.
3. TFTP - Network Configuration Backups Using UDP
Trivial File Transfer Protocol (TFTP) is a lightweight file transfer protocol commonly used for transferring router and switch configuration files.
Cisco IOS supports transferring configurations to a TFTP server for backup purposes.
For example:
copy running-config tftp:
TFTP uses UDP and provides no built-in encryption or user authentication, making it suitable primarily for trusted, controlled environments.
Cisco
4. TFTP - Small File Transfers Using Port 69
TFTP uses UDP port 69 for initial file transfer requests. Subsequent data exchanges use UDP transfer identifiers negotiated for the session.
Its simple design makes TFTP useful for transferring configuration files, firmware images, and boot files.
Cisco
References:
Cisco Certified Support Technician Networking (100-150) - Network Fundamentals, Common Network Protocols.
Cisco IOS XE Secure Shell Configuration Guide - Secure Shell Version 2.
Cisco - Understand How to Backup and Restore Configuration Files.
Cisco Catalyst 2960-X Configuration Guide - Working with Configuration Files Using TFTP.
Cisco IOS XR System Security Configuration Guide - Implementing Secure Shell.


93. Frage
......

Jede Version der Cisco 100-150 Prüfungsunterlagen von uns hat ihre eigene Überlegenheit. PDF Version hat keine Beschränkung für Anlage, deshalb können Sie irgendwo die Unterlagen lesen. Wenn Sie Internet benutzen können, die Online Test Engine der Cisco 100-150 können Sie sowohl mit Windows, Mac als auch Android, iOS benutzen. Mit Simulations-Software können Sie die Prüfungsumwelt der Cisco 100-150 erfahren und bessere Kenntnisse darüber erwerben. Übrigens, Sie dürfen die Prüfungssoftware irgendwie viele Male installieren.

100-150 Buch: https://www.zertfragen.com/100-150_prufung.html

Außerdem sind jetzt einige Teile dieser ZertFragen 100-150 Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=1hXmRh62JHLHJPVI3E_qdfelQmxTnptpG