If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. Lead2PassExam site has always been committed to provide candidates with a real Microsoft AZ-802 Certification Exam training materials. The Lead2PassExam Microsoft AZ-802 Certification Exam software are authorized products by vendors, it is wide coverage, and can save you a lot of time and effort.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Secure Windows Server on-premises and hybrid infrastructures | 10% | - Manage access control and permissions - Implement security baselines and hardening - Configure Windows Defender and audit policies |
| Topic 2: Manage virtual machines and containers | 15% | - Configure Azure Arc-enabled servers and VMs - Deploy and manage containers and Kubernetes on Windows Server - Deploy and manage Hyper-V virtual machines |
| Topic 3: Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Configure IP addressing, DNS, and DHCP - Secure network traffic in hybrid environments - Implement hybrid network connectivity - Configure software-defined networking |
| Topic 4: Implement high availability and disaster recovery | 5% | - Implement backup and recovery solutions - Perform server and workload migrations - Use Azure Site Recovery for hybrid workloads - Monitor and troubleshoot Windows Server environments - Configure failover clustering |
| Topic 5: Manage Windows Servers and workloads in a hybrid environment | 20% | - Configure remote management and secure administration - Deploy servers using Windows Admin Center and Azure Arc - Implement hybrid identity solutions - Manage updates and patches across hybrid servers |
| Topic 6: Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Install and configure domain controllers - Manage FSMO roles and replication - Implement and manage Group Policy Objects - Integrate AD DS with Azure AD and Azure Arc |
| Topic 7: Manage storage and file services | 15% | - Integrate on-premises storage with Azure Storage - Configure file servers and shares - Implement Storage Spaces and Storage Spaces Direct - Configure data deduplication and replication |
As the old saying goes people change with the times. People must constantly update their stocks of knowledge and improve their practical ability. Passing the test AZ-802 certification can help you achieve that and buying our AZ-802 test practice dump can help you pass the test smoothly. Our AZ-802 study question is superior to other same kinds of study materials in many aspects. Our products’ test bank covers the entire syllabus of the test and all the possible questions which may appear in the test. Each question and answer has been verified by the industry experts. The research and production of our AZ-802 Exam Questions are undertaken by our first-tier expert team.
NEW QUESTION # 44
Your network contains two Active Directory Domain Services (AD DS) forests named contoso.com and adatum.com. A two-way external trust exists between contoso.com and adatum.com. The forests contain the servers shown in the following table: DC1 (contoso.com, hosts all FSMO roles), DC2 (adatum.com, hosts all FSMO roles), SRV1 (adatum.com, file server), SRV2 (adatum.com, file server). You need to ensure that users from contoso.com can access only shared resources hosted on SRV1. The solution must meet the following requirements: * Ensure that users from adatum.com can access the resources hosted in contoso.com (unrestricted, as today). * Prevent the contoso.com users from accessing any other resources in adatum.com.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Modify the trust on: DC2. Modify the permissions for the: Computer object of SRV1.
By default, an external trust grants every authenticated user in the trusted domain (contoso.com, from adatum.
com ' s perspective) the implicit right to attempt authentication against any computer in the trusting domain (adatum.com), with actual access then governed only by each resource ' s own ACLs -- there is no built-in restriction limiting which specific computers users can even attempt to authenticate against. Selective Authentication is the trust setting that changes this: once enabled on the trust from the perspective of the domain being accessed, authenticating users from the other side must be explicitly granted the " Allowed to Authenticate " permission on the specific computer object(s) they should be allowed to reach; without that permission, authentication is denied outright, regardless of any file/share-level permissions. Because the goal is to restrict contoso.com users specifically -- without restricting the reverse direction (adatum.com users accessing contoso.com resources, which must remain unrestricted) -- Selective Authentication must be enabled only on the adatum.com side of the trust, which is configured on DC2, the domain controller hosting the FSMO roles (and by extension the trust configuration) for adatum.com; enabling it on DC1 or on both would risk also restricting the other direction. Once Selective Authentication is enabled on that side, the " Allowed to Authenticate " permission must then be granted specifically on SRV1 ' s own computer object (not on DC1 ' s, and not merely on SRV1 ' s file shares, since Selective Authentication is enforced at the computer- object authentication level, before any share-level permission is even evaluated) for the relevant contoso.com users or groups.
NEW QUESTION # 45
Your network contains an Active Directory Domain Services (AD DS) domain named adatum.com. The domain contains a server named Server1 and the users shown in the following exhibit (User1: member of Group1; User2: member of Group2; User3: member of Group3). Server1 contains a folder named D:\Folder1.
The advanced security (NTFS) permissions for Folder1 are: Administrators (SERVER1\Administrators) - Full control; Group1 (ADATUM\Group1) - Read; Group2 (ADATUM\Group2) - Write. Folder1 is shared as Share1 (FolderEnumerationMode: Unrestricted). The share permissions for Share1 are: Group1 - Allow Change; Group3 - Allow Full Control. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
D:\Folder1 NTFS permissions: Administrators=Full control, Group1(ADATUM)=Read, Group2(ADATUM)
=Write.
Answer:
Explanation:
Explanation:
User1 can read the files in Share1: Yes. User3 can delete files in Share1: No. If User2 connects to \\Server1.
adatum.com from File Explorer, Share1 will be listed: Yes.
When a folder is accessed across the network through its share, the effective permission is always the more restrictive of the NTFS permission and the share permission evaluated together. User1 belongs to Group1, which has NTFS Read and share-level Change; the combined effective permission is Read, so User1 can indeed read the files in Share1. User3 belongs to Group3, which has no NTFS permission entry at all on D:
\Folder1 (only Administrators, Group1, and Group2 appear in the NTFS ACL, with no inheritance from a parent granting Group3 access), even though Group3 holds Full Control at the share level; because NTFS grants nothing to Group3, the combined effective permission is no access whatsoever, so User3 cannot delete, read, or otherwise touch the files, regardless of the generous share permission. The third statement concerns Access-Based Enumeration (ABE), which Windows exposes on a share through its folder enumeration mode:
Share1 ' s FolderEnumerationMode is set to Unrestricted, meaning ABE is disabled for this share. With ABE disabled, every share is listed to every user browsing \\Server1.adatum.com regardless of that user ' s actual access rights, so Share1 will appear in the listing when User2 (Group2, which has no share permission entry and effectively no access to the share ' s contents at all) browses to the server, even though User2 could not open the share ' s contents once inside. ABE only hides shares from users with zero effective access when it is explicitly enabled (AccessBased mode), which is not the case here.
NEW QUESTION # 46
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You configure the DHCP scope options for Scope1. Does this meet the requirement?
Answer: B
Explanation:
DHCP scope options configure settings that are delivered to every client that obtains a lease from that scope -- for example, the default gateway, DNS servers, or WINS servers a client should use. Scope options apply uniformly (or via policy-based conditional matching) to leases in general; they have no mechanism for pinning one specific client ' s MAC address to one specific, unchanging IP address. Configuring scope options does nothing to ensure that any particular printer, or any particular device at all, receives the same IP address on every renewal -- a printer could still be issued a different available address from the scope ' s pool at any lease renewal, especially if its previous address had already been reassigned during a period when the printer was offline. The mechanism that actually pins a specific device to a specific address in DHCP is a reservation, which binds a chosen IP address to that device ' s MAC address so the DHCP server always offers that same address to that specific client. Since scope options do not provide this per-client binding capability at all, configuring the DHCP scope options for Scope1 does not meet the requirement that the five printers always receive the same IP address.
NEW QUESTION # 47
You have an Azure subscription that contains the virtual networks shown in the following table: VNet1 (Subnet11, Subnet12, West US), VNet2 (Subnet21, West US), VNet3 (Subnet31, Central US). You deploy a virtual machine named VM1 that runs Windows Server. VM1 is connected to Subnet11. You plan to add an additional network interface named NIC1 to VM1. To which subnets can NIC1 be attached?
Virtual network/subnet/region table
Answer: E
Explanation:
All network interfaces attached to a single Azure VM must belong to the same virtual network as each other -- Azure does not permit a multi-NIC VM to have its NICs spread across different virtual networks, even if those networks are peered or located in the same region. NICs on the same VM can, however, be placed in different subnets within that one shared virtual network. Since VM1 ' s existing NIC is connected to Subnet11, which is part of VNet1, any additional NIC (NIC1) added to VM1 must also be created within VNet1 -- meaning it can be placed in either Subnet11 or Subnet12, both of which belong to VNet1. VNet2 ' s Subnet21, despite being in the same West US region as VNet1, is a separate virtual network and therefore not a valid target for a second NIC on VM1 (VNet peering enables routed connectivity between VNets, but it does not let a VM ' s NIC be provisioned inside a peered VNet ' s subnet). VNet3 ' s Subnet31 is both a different virtual network and a different region (Central US), making it even less eligible. Therefore, NIC1 can only be attached to Subnet11 or Subnet12, both within VM1 ' s existing virtual network, VNet1.
NEW QUESTION # 48
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a server named Server1.
Server1 hosts an IIS website that has Windows Authentication enabled and Negotiate configured as an authentication provider.
The IIS application pool runs as CONTOSO\WebAppSvc, and Kerberos uses the application pool identity.
You
discover that users cannot use Kerberos authentication to access http://server1.contoso.com.
A network trace shows that a client computer named Client1 requested a service ticket for HTTP/server1.
contoso.com, and the Key Distribution Center (KDC) returned KDC_ERR_S_PRINCIPAL_UNKNOWN.
You need to restore Kerberos authentication. The application pool identity must remain unchanged.
What should you modify?
Answer: C
Explanation:
Kerberos authentication relies on Service Principal Names (SPNs) to identify the service account associated with a requested network service. The KDC_ERR_S_PRINCIPAL_UNKNOWN error indicates that the Key Distribution Center cannot find the requested SPN in Active Directory.
Because the IIS application pool runs under CONTOSO\WebAppSvc and Kerberos uses that identity, HTTP
/server1.contoso.com must be registered against the WebAppSvc account.
Administrators can use setspn -S HTTP/server1.contoso.com CONTOSO\WebAppSvc to register the SPN while checking for duplicates.
Modifying time synchronization does not resolve a missing SPN. Changing DNS records or firewall rules also does not correct the Kerberos service-account mapping. Registering the SPN against Server1 ' s computer account would be inappropriate when the configured Kerberos identity is WebAppSvc.
Therefore, option B is correct.
NEW QUESTION # 49
......
It is universally acknowledged that the pass rate is the most persuasive evidence to prove how useful and effective a kind of AZ-802 practice test is. In terms of our AZ-802 training materials, the pass rate is one of the aspects that we take so much pride in because according to the statistics from the feedbacks of all of our customers, under the guidance of our AZ-802 Preparation materials, the pass rate among our customers has reached as high as 98% to 100%, which marks the highest pass rate in the field. So just feel rest assured to buy our AZ-802 study guide!
Exam AZ-802 Collection Pdf: https://www.lead2passexam.com/Microsoft/valid-AZ-802-exam-dumps.html