DOWNLOAD the newest PremiumVCEDump 300-715 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1zfhcZhXoCGj1FW1dAQJKLlqnlayjc5rS
If you do not quickly begin to improve your own strength, the next one facing the unemployment crisis is you. The time is very tight, and choosing our 300-715 study materials can save you a lot of time. And our 300-715 Exam Questions can really save you time and efforts. If you study with our 300-715 learning guide for 20 to 30 hours, then you will be able to pass the exam and get the certification.
| Section | Weight | Objectives |
|---|---|---|
| Architecture and Deployment | 10% | - Configure personas - Describe deployment options - Describe zero-touch provisioning - Describe hardware and virtual machine performance specifications |
| Network Access Device Administration | 10% | - Compare AAA protocols - Configure TACACS+ device administration and command authorization |
| Web Auth and Guest Services | 15% | - Configure sponsor and guest portals - Configure web authentication - Configure guest access services |
| Endpoint Compliance | 10% | - Configure posture conditions, policies and client provisioning - Configure compliance module - Describe endpoint compliance, posture services and client provisioning - Configure posture agents and operational modes |
| Profiler | 15% | - Configure endpoint identity management - Implement profiler services - Implement probes - Implement Change of Authorization (CoA) |
| BYOD | 15% | - Configure BYOD device onboarding - Describe Cisco BYOD functionality, use cases and components - Configure certificates for BYOD - Configure endpoint block list/allow list |
| Policy Enforcement | 25% | - Configure native AD and LDAP integration - Configure wireless network access using 802.1X - Configure authentication and authorization policies - Configure wired network access using 802.1X and IBNS 2.0
- Configure Cisco TrustSec - Describe identity store options
|
A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable. Imagine, if you're using a 300-715 practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the 300-715 test material can avoid these risks very well.
NEW QUESTION # 278
Which two default endpoint identity groups does Cisco ISE create? (Choose two )
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html Default Endpoint Identity Groups Created for Endpoints Cisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group. These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
Workstation-An identity group that contains all the profiled workstations on your network.
NEW QUESTION # 279
What does the dot1x system-auth-control command do?
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/XE3-8-0E/15-
24E/configuration/guide/xe-380-configuration/dot1x.html
NEW QUESTION # 280
A network engineer must create a new sponsored guest portal in Cisco ISE to provide secure wireless access for company guests. All required SSL certificates, external identity sources, and identity source sequences have already been configured. Drag and drop the remaining settings into the correct configuration sequence.
Answer: A,B,C,D
Explanation:
The sponsored guest portal must first be created so that Cisco ISE has a portal object whose authentication, customization, and authorization settings can be configured. After creation, the engineer configures the Sponsor Change Password Settings option, which defines whether sponsored users must change an assigned password and controls related credential behavior. The Post-Login Banner Settings page is then configured to determine the information displayed after successful guest authentication. Finally, the sponsored guest portal must be authorized through the applicable Cisco ISE authorization profile and policy rule so that matching guest sessions are redirected to or permitted through the portal. Authorization cannot logically occur before the portal exists. The sequence therefore follows object creation, credential configuration, user-interface customization, and policy enforcement: D, B, C, and A.
NEW QUESTION # 281
What are the three default behaviors of Cisco ISE with respect to authentication, when a user connects to a switch that is configured for 802.1X, MAB, and WebAuth? (Choose three)
Answer: A,D,E
Explanation:
MAB traffic uses internal endpoints for retrieving identity. MAB (MAC Authentication Bypass) is an authentication method that grants network access to specific MAC addresses regardless of
802.1X capability or credentials. Cisco ISE uses internal endpoints to store and retrieve MAC address information for MAB authentication.
Dot1X traffic uses a user-defined identity store for retrieving identity. Dot1X is a port-based authentication protocol that uses EAP (Extensible Authentication Protocol) to authenticate clients to a network. Cisco ISE uses a user-defined identity store to retrieve identity information for Dot1X authentication. This identity store can be a RADIUS server, Active Directory, or another type of identity store.
Unmatched traffic is dropped because of the Reject/Reject/Drop action that is configured under Options. By default, Cisco ISE is configured to drop unmatched traffic. This means that any traffic that does not match a known authentication method (e.g., MAB, Dot1X, WebAuth) will be dropped.
NEW QUESTION # 282
Which two default endpoint identity groups does Cisco ISE create? (Choose two )
Answer: B,C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE
* redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.
NEW QUESTION # 283
......
Society will never welcome lazy people, and luck will never come to those who do not. We must continue to pursue own life value, such as get the test Cisco certification, not only to meet what we have now, but also to constantly challenge and try something new and meaningful. For example, our 300-715 prepare questions are the learning product that best meets the needs of all users. There are three version of our 300-715 training prep: PDF, Soft and APP versions. And you can free download the demo of our 300-715 learning guide before your payment. Just rush to buy our 300-715 exam braindump!
New 300-715 Test Materials: https://www.premiumvcedump.com/Cisco/valid-300-715-premium-vce-exam-dumps.html
P.S. Free 2026 Cisco 300-715 dumps are available on Google Drive shared by PremiumVCEDump: https://drive.google.com/open?id=1zfhcZhXoCGj1FW1dAQJKLlqnlayjc5rS