You only need 20-30 hours to learn our NS0-522 Test Braindumps and then you can attend the exam and you have a very high possibility to pass the exam. For many people whether they are the in-service staff or the students they are busy in their job, family lives and other things. But you buy our NS0-522 prep torrent you can mainly spend your time energy and time on your job, the learning or family lives and spare little time every day to learn our NetApp Implementation Engineer - SAN ONTAP Exam exam torrent. Owing to the superior quality and reasonable price of our exam materials, our exam torrents are not only superior in price than other makers in the international field, but also are distinctly superior in many respects.
| Section | Objectives |
|---|---|
| ONTAP SAN implementation testing and troubleshooting | - Troubleshooting tasks - Data migration - Testing tasks |
| ONTAP SAN Concepts | - Storage space utilization or management concepts - Storage controller configuration concepts - Data protection concepts - Switch and/or host configuration concepts |
| ONTAP SAN solution assessment | - Solution design and hardware provisioned to meet customer requirements or expectations - Environmental or physical considerations - Configuration components using tools - Prerequisites and inventory for the installation of all SAN components during planning |
| ONTAP SAN implementation and configuration | - Clustered storage system FCP configuration tasks - Storage space utilization or management concepts - Clustered storage system iSCSI configuration tasks - Data protection - Switches and host systems - SVM configuration tasks - Clustered storage system NVMe configuration tasks - Clustered storage systems and node configuration tasks |
>> Reliable NS0-522 Exam Practice <<
All our team of experts and service staff are waiting for your mail on the NS0-522 exam questions all the time. As long as you encounter obstacles in the learning process on our NS0-522 training guide, send us an email and we will solve it for you at the first time. Please believe that NS0-522 Learning Materials will be your strongest backing from the time you buy our NS0-522 practice braindumps to the day you pass the exam.
NEW QUESTION # 86
A customer is using a new two-node NetApp All SAN Array (ASA) configuration with SnapMirror active sync. To verify that everything is set up correctly, the customer is reviewing the number of paths on the ESXi hosts.
How many paths should the customer see?
Answer: B
Explanation:
Eight Active/Optimized paths and zero Active/Unoptimized paths is the correct result for the described ASA configuration. NetApp All SAN Array systems use symmetric active-active multipathing, under which all valid paths to a LUN are presented as active and optimized. NetApp's VMware guidance likewise states that ESXi recognizes ASA storage as symmetric and uses the active paths with round-robin multipathing. With SnapMirror active sync and the host connected through the intended redundant paths, the expected path presentation therefore does not contain the Active/Unoptimized paths characteristic of asymmetric access on non-ASA configurations. The key distinction is that ASA pathing is designed to avoid waiting for an ALUA transition after a controller failure. Relevant SAN ONTAP topics are ASA symmetric active-active, ALUA, ESXi multipathing, SnapMirror active sync, and redundant SAN paths.
NEW QUESTION # 87
When using SnapMirror active sync between two clusters, which NetApp service orchestrates failover in case the primary storage system fails?
Answer: A
Explanation:
ONTAP Mediator provides the quorum and health information required for automated failover in a SnapMirror active sync configuration. It operates as an independent third party that monitors communication with both participating ONTAP clusters and provides information that enables ONTAP to determine whether the primary system is unavailable. During an automatic unplanned failover, ONTAP uses Mediator-assisted quorum information before allowing the surviving cluster to serve the protected workload. The Mediator does not carry application data and is not equivalent to MetroCluster Tiebreaker. Active IQ provides monitoring and analytics, while SANtricity manages E-Series storage. NetApp requires a properly configured Mediator for automated failover functionality in applicable SnapMirror active sync configurations. Relevant SAN ONTAP topics include SnapMirror active sync, ONTAP Mediator, quorum, automated unplanned failover, and synchronous replication.
NEW QUESTION # 88
During maintenance of A NetApp AFF ONTAP cluster, which two steps are needed to move the SAN UFs to new nodes that are members of a portset? (Choose two.)
Answer: A,B
Explanation:
To move SAN LIFs to new nodes that are members of a portset during maintenance of a NetApp AFF ONTAP cluster, you should take the following steps:
* Remove the LIF from the portset: This ensures that the LIF is no longer associated with the current node, preparing it for the move to the new node.
* Take the SAN LIF offline: This step is necessary to make configuration changes without causing disruption to the SAN hosts. Once offline, the LIF can be moved to the new node and reconfigured as needed.
These actions help maintain the integrity and performance of the SAN environment during the migration of LIFs.
For more details, see:
* NetApp Documentation on Moving SAN LIFs
* NetApp Community on Moving LIFs
NEW QUESTION # 89
An engineer is troubleshooting FC connectivity issues on a customer's system and sees the following output from the network fcp adapter show command:
According to the output, what is the domain ID of the switch that is connected to port 2a of node n2?
Answer: A
Explanation:
The port address shown for node n2, adapter 2a is 10020. ONTAP reports the FC host port address as a hexadecimal fabric address. Fibre Channel port addresses are interpreted as a 24-bit FC address; when the displayed value is zero-padded to six hexadecimal digits, 10020 becomes 010020. The high-order byte is therefore 01, identifying switch domain ID 1. NetApp's network fcp adapter show command reference confirms that the command reports the Host Port Address and also exposes a domain-id field for the connected fabric. The other choices do not match the domain portion of this FC address. Therefore, the V9.02 supplied answer of D is incorrect for the displayed output. Relevant SAN ONTAP topics are FCP adapter diagnostics, FC port addresses, domain IDs, and fabric connectivity.
NEW QUESTION # 90
A customer Is deploying a new 8-node NetApp ONTAP cluster for their SAN workloads using FCP, NVMe
/FC, and NVMe/TCP.
In this scenario, which statement is true?
Answer: A
Explanation:
In a NetApp ONTAP cluster using FCP, NVMe/FC, and NVMe/TCP, it is important to understand that NVMe
/FC and FCP require different FC ports. This separation is necessary because the protocols, while both running over Fibre Channel, have different configurations and operational characteristics.
For more information, refer to:
* NetApp Documentation on NVMe Configuration
* NetApp Best Practices for SAN
NEW QUESTION # 91
......
The Network Appliance NS0-522 certification exam and this will assist you to take the right decision for your career. The right decision is to enroll in the Network Appliance NS0-522 exam and start preparation with top-notch Network Appliance NS0-522 Exam Dumps. All Network Appliance NS0-522 practice test questions formats are ready for quick download.
Test NS0-522 Practice: https://www.getcertkey.com/NS0-522_braindumps.html