DOWNLOAD the newest Dumps4PDF VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1Zp17Q9hzQcNVVAsVhm7qpyH5PY1YQ0Ue
Now in such society with a galaxy of talents, stabilizing your job position is the best survival method. But stabilizing job position is not so easy. When others are fighting to improve their vocational ability, if you still making no progress and take things as they are, then you will be eliminated. In order to stabilize your job position, you need to constantly improve your VNX301 professional ability and keep up with the pace of others to let you not fall far behind others.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
The language in our VNX301 test guide is easy to understand that will make any learner without any learning disabilities, whether you are a student or a in-service staff, whether you are a novice or an experienced staff who has abundant experience for many years. It should be a great wonderful idea to choose our VNX301 Guide Torrent for sailing through the difficult test. On the whole, nothing is unbelievable, to do something meaningful from now, success will not wait for a hesitate person, go and purchase!
NEW QUESTION # 47
In an HA active-active deployment, one device has two WAN networks, INET-1 and MPLS-1 , and its peer also has two WAN networks, INET-2 and MPLS-2 . In this scenario, how many subinterfaces will be created on the cross-connect link between the devices by an HA active-active workflow?
Answer: A
Explanation:
The correct answer is D . In a Versa HA active-active branch deployment, the cross-connect link between the two CPE devices is used to extend WAN transport reachability between the peers. Versa SD-WAN design documentation explains that, in an HA active-active design, a cross-connect cable between the two devices extends one device's transport VR to the other device and vice versa. For example, the documentation describes the cross-connect as extending the MPLS-Transport-VR to one device and the Internet- Transport-VR to the peer device.
In the question, there are four total WAN networks across the HA pair: INET-1 , MPLS-1 , INET-2 , and MPLS-2 . The HA active-active workflow must create separate logical subinterfaces on the cross-connect link for each WAN network so that each transport segment can be extended and kept logically separated across the two appliances. Therefore, the number of subinterfaces created on the cross-connect link equals the total number of WAN networks across the HA pair, which is four .
Options A, B, and C are incorrect because they undercount the number of required transport extensions. Two subinterfaces would only account for two WAN networks, but this design has four separate WAN transport networks.
NEW QUESTION # 48
Examine the exhibit below.
You are deploying Versa Secure SD-WAN and require high availability for the Versa Directors. You configured the Versa Director high availability parameters shown in the exhibit. With the parameters shown, which two statements are true? (Choose two.)
Answer: C,D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From Versa Networks SDWAN Topics:
The correct answers are B and D . In the exhibit, Enable Auto Switchover is not selected. However, the Failover Timeout value is configured as 300 seconds . Versa Director HA documentation states that the Failover Timeout is the timeout period before the standby Director node can promote itself to become the active Director node. Therefore, if the active or primary Director fails, the backup Director can automatically assume the active role after the failover condition and timeout are met.
The important distinction is that Auto Switchover controls revertive behavior after recovery, not the initial standby takeover during failure. Versa documentation explains that Director HA is non-revertive by default.
This means that when the designated master or primary Director comes back online after recovery, it is not automatically promoted back to active unless automatic switchover is enabled. To make the designated active Director automatically reclaim the active state after recovery, Enable Auto Switchover must be selected and the Auto Switchover Timeout must expire.
NEW QUESTION # 49
A branch uses a template variable for the WAN VLAN ID. During deployment, Branch-A receives VLAN
100 and Branch-B receives VLAN 200 from device bind data while using the same template. Which statement is correct?
Answer: B
Explanation:
The correct answer is A . Versa template-based provisioning is designed to separate common configuration from site-specific values. A device template can define common interface, service, routing, and SD-WAN behavior, while variables and device bind data provide unique values for each appliance. This allows the same template to be reused across many branches while assigning different WAN IP addresses, gateways, VLAN IDs, circuit names, or other per-site parameters during onboarding.
In this scenario, Branch-A and Branch-B use the same template but receive different WAN VLAN IDs from bind data. That is normal and expected in a scalable SD-WAN deployment. Without variables, administrators would need to create a separate template for every site, which would be operationally inefficient and increase configuration drift.
The Controller does not automatically rewrite VLAN IDs after IPsec comes up; VLAN IDs must be part of the generated device configuration. It is also not required to duplicate the device template for each branch. The correct Versa design is reusable templates plus unique bind-data values.
NEW QUESTION # 50
Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?
Answer: B
Explanation:
The correct answer is A . The exhibit shows that the IPsec VPN is being configured with Tunnel Routing Instance: XIAN-Control-VR . However, the question states that the tunnel is toward a non-SD-WAN site over the INET-Transport-VR . For a site-to-site IPsec tunnel, the tunnel routing instance must match the routing instance used to reach the peer public IP address. In this case, the remote non-SD-WAN peer is
10.1.1.1 , and the intended underlay transport is INET-Transport-VR , not the Control VR.
Versa troubleshooting documentation explains that routing instances are used to define where traffic is sourced and forwarded. For example, configuration examples select routing instances when enabling services or initiating tests, and traffic must use the correct WAN or transport routing instance to reach the remote endpoint. Versa branch troubleshooting also emphasizes that after transport connectivity is available, the branch establishes IKE-based IPsec connectivity; if that connectivity fails, the IPsec-related interface remains down.
Changing the routing instance to global would not be correct because the intended path is specifically INET-Transport-VR. A higher precedence value is not required to establish the tunnel. The policy selector shown already defines local-to-remote interesting traffic, and the key failure is the incorrect tunnel routing instance.
NEW QUESTION # 51
Examine the exhibit below.
As an administrator of a Versa Secure SD-WAN, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but the Director is not displaying any information for the WAN circuits.
In this scenario, what should be done to get the graph populated for all WAN circuits?
Answer: D
Explanation:
The correct answer is B . The exhibit shows the branch interface summary in Versa Director with a Live Data column. To populate real-time bandwidth graphs for WAN circuits, the administrator must select Live Data for the WAN interfaces that need to be monitored. Versa monitoring documentation states that, from a Director node, you can monitor VOS devices and organizations, and that Director, together with Versa Analytics, can poll VOS devices in real time to understand what is happening on the devices. This real-time information can be displayed to assist with troubleshooting.
Because the question asks for the current bandwidth of each WAN circuit, historical analytics alone is not sufficient. The dashboard must poll live statistics from the selected WAN circuits. In the exhibit, not all WAN interfaces appear to have Live Data selected; therefore, the graph is not populated for all circuits. Refreshing the page does not enable polling and will not solve the missing data condition.
Selecting only MPLS would populate only the MPLS circuit, not all WAN circuits. Unselecting and reselecting only the INET circuit would affect only that one interface. Therefore, Live Data must be selected for all WAN circuits whose current bandwidth should be displayed.
NEW QUESTION # 52
......
When you decide to pass VNX301 exam, you must want to find a good study materials to help you prepare for your exam. It is evident to all that the VNX301 test torrent from our company has a high quality all the time. A lot of people who have bought our products can agree that our VNX301 Test Questions are very useful for them to get the certification. There have been 99 percent people used our VNX301 exam prep that have passed their exam and get the certification, more importantly, there are signs that this number is increasing slightly.
Best VNX301 Vce: https://www.dumps4pdf.com/VNX301-valid-braindumps.html
BONUS!!! Download part of Dumps4PDF VNX301 dumps for free: https://drive.google.com/open?id=1Zp17Q9hzQcNVVAsVhm7qpyH5PY1YQ0Ue