Prepare with Actual CKS Exam Questions to Get Certified in First Attempt

DOWNLOAD the newest Dumpexams CKS PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1sfZTjly0dOvzVuyrLvy8-5DQrzshF-aH

As this version is called software version or PC version, maybe many candidates may think our CKS PC test engine may just be used on personal computers. At first, it can be only used on PC. But with our IT staff's improvement, now our Linux Foundation CKS PC test engine can be installed on all electronic products. You can copy to your mobile, Ipad or others. No matter anywhere or any time you want to learn CKS PC test engine, it is convenient for you. For busy workers, you can make the best of your time on railway or bus, mastering one question and answers every time will be great.

Linux Foundation CKS Exam Syllabus Topics:

SectionWeightObjectives
Supply Chain Security20%- Image scanning and verification
- Secure CI/CD practices
Cluster Setup15%- Secure installation configuration
- Hardening cluster components
Minimizing Microservice Vulnerabilities20%- Pod security standards
- Container isolation and security contexts
Cluster Hardening15%- API server security
- Authentication and authorization
Monitoring, Logging and Runtime Security15%- Runtime threat detection
- Audit logging and monitoring
System Hardening15%- Host security controls
- Kernel and node security configuration

>> CKS Latest Exam Questions <<

CKS Real Testing Environment | Latest CKS Braindumps Files

Our PDF version of our CKS exam practice guide is convenient for the clients to read and supports the printing. If the clients use our PDF version they can read the PDF form conveniently and take notes. The CKS quiz prep can be printed onto the papers. If the clients need to take note of the important information they need they can write them on the papers to be convenient for reading or print them on the papers. The clients can read our CKS Study Materials in the form of PDF or on the printed papers. Thus the clients learn at any time and in any place and practice the CKS exam practice guide repeatedly.

Linux Foundation Certified Kubernetes Security Specialist (CKS) Sample Questions (Q59-Q64):

NEW QUESTION # 59
Cluster: admission-cluster
Master node: master
Worker node: worker1
You can switch the cluster/configuration context using the following command:
[desk@cli] $ kubectl config use-context admission-cluster
Context:
A container image scanner is set up on the cluster, but it's not yet fully integrated into the cluster's configuration. When complete, the container image scanner shall scan for and reject the use of vulnerable images.
Task:
You have to complete the entire task on the cluster's master node, where all services and files have been prepared and placed.
Given an incomplete configuration in directory /etc/Kubernetes/config and a functional container image scanner with HTTPS endpoint https://imagescanner.local:8181/image_policy:
1. Enable the necessary plugins to create an image policy
2. Validate the control configuration and change it to an implicit deny
3. Edit the configuration to point to the provided HTTPS endpoint correctly Finally, test if the configuration is working by trying to deploy the vulnerable resource /home/cert_masters/test-pod.yml Note: You can find the container image scanner's log file at /var/log/policy/scanner.log

Answer:

Explanation:
[master@cli] $ cd /etc/Kubernetes/config
1. Edit kubeconfig to explicity deny
[master@cli] $ vim kubeconfig.json
"defaultAllow": false # Change to false
2. fix server parameter by taking its value from ~/.kube/config
[master@cli] $cat /etc/kubernetes/config/kubeconfig.yaml | grep server
server:
3. Enable ImagePolicyWebhook
[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml
- --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this
- --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Explanation
[desk@cli] $ ssh master
[master@cli] $ cd /etc/Kubernetes/config
[master@cli] $ vim kubeconfig.json
{
"imagePolicy": {
"kubeConfigFile": "/etc/kubernetes/config/kubeconfig.yaml",
"allowTTL": 50,
"denyTTL": 50,
"retryBackoff": 500,
"defaultAllow": true # Delete this
"defaultAllow": false # Add this
}
}

Note: We can see a missing value here, so how from where i can get this value
[master@cli] $cat ~/.kube/config | grep server
or
[master@cli] $cat /etc/kubernetes/manifests/kube-apiserver.yaml

[master@cli] $vim /etc/kubernetes/config/kubeconfig.yaml

[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml - --enable-admission-plugins=NodeRestriction # Delete This - --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this - --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Reference: https://kubernetes.io/docs/reference/access-authn-authz/admission-controllers/
- --enable-admission-plugins=NodeRestriction # Delete This
- --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this
- --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this
[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml - --enable-admission-plugins=NodeRestriction # Delete This - --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this - --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Reference: https://kubernetes.io/docs/reference/access-authn-authz/admission-controllers/


NEW QUESTION # 60
Cluster: dev
Master node: master1 Worker node: worker1
You can switch the cluster/configuration context using the following command: [desk@cli] $ kubectl config use-context dev Task: Retrieve the content of the existing secret named adam in the safe namespace.
Store the username field in a file names /home/cert-masters/username.txt, and the password field in a file named /home/cert-masters/password.txt.
1. You must create both files; they don't exist yet. 2. Do not use/modify the created files in the following steps, create new temporary files if needed.
Create a new secret names newsecret in the safe namespace, with the following content: Username: dbadmin Password: moresecurepas Finally, create a new Pod that has access to the secret newsecret via a volume:
Namespace: safe
Pod name: mysecret-pod
Container name: db-container
Image: redis
Volume name: secret-vol
Mount path: /etc/mysecret

Answer:

Explanation:




NEW QUESTION # 61
You need to create a Kubernetes secret that stores a password and use that secret to access a private Docker registry during pod deployment. Describe the steps you would take to create the secret and deploy a pod using the secret to pull an image from the private registry.

Answer:

Explanation:
Solution (Step by Step) :
1. Create the Secret:
- Create a secret using 'kubectl create secret docker-registry my-docker-secret -docker-server-my-private-registry.com -docker-username-your-
username --docker-password=your-password --docker-email=your-email'
- Replace 'my-private-registry-com', 'your-username', 'your-password' , and 'your-email" with your actual registry credentials.
2. Define the Pod Deployment:
- Define a pod deployment YAML file that references the newly created secret for pulling the image from the private registry:

- Replace 'my-private-registry-commy-image:latests with the actual image name and tag from your private registry. 3. Deploy the Pod: - Apply the deployment YAML using 'kubectl apply -f my-pod.yamr. 4. Verify the Pod: - Check the pod status using 'kubectl get pods' to confirm that the pod is running and using the secret to pull the image from the private registry.


NEW QUESTION # 62
SIMULATION

Context
This cluster uses containerd as CRI runtime.
Containerd's default runtime handler is runc. Containerd has been prepared to support an additional runtime handler, runsc (gVisor).
Task
Create a RuntimeClass named sandboxed using the prepared runtime handler named runsc.
Update all Pods in the namespace server to run on gVisor.

Answer:

Explanation:
See the Explanation below
Explanation:









NEW QUESTION # 63
Fix all issues via configuration and restart the affected components to ensure the new setting takes effect.
Fix all of the following violations that were found against the API server:- a. Ensure the --authorization-mode argument includes RBAC b. Ensure the --authorization-mode argument includes Node c. Ensure that the --profiling argument is set to false Fix all of the following violations that were found against the Kubelet:- a. Ensure the --anonymous-auth argument is set to false.
b. Ensure that the --authorization-mode argument is set to Webhook.
Fix all of the following violations that were found against the ETCD:-
a. Ensure that the --auto-tls argument is not set to true
Hint: Take the use of Tool Kube-Bench

Answer:

Explanation:
API server:
Ensure the --authorization-mode argument includes RBAC
Turn on Role Based Access Control. Role Based Access Control (RBAC) allows fine-grained control over the operations that different entities can perform on different objects in the cluster. It is recommended to use the RBAC authorization mode.
Fix - Buildtime
Kubernetes
apiVersion: v1
kind: Pod
metadata:
creationTimestamp: null
labels:
component: kube-apiserver
tier: control-plane
name: kube-apiserver
namespace: kube-system
spec:
containers:
- command:
+ - kube-apiserver
+ - --authorization-mode=RBAC,Node
image: gcr.io/google_containers/kube-apiserver-amd64:v1.6.0
livenessProbe:
failureThreshold: 8
httpGet:
host: 127.0.0.1
path: /healthz
port: 6443
scheme: HTTPS
initialDelaySeconds: 15
timeoutSeconds: 15
name: kube-apiserver-should-pass
resources:
requests:
cpu: 250m
volumeMounts:
- mountPath: /etc/kubernetes/
name: k8s
readOnly: true
- mountPath: /etc/ssl/certs
name: certs
- mountPath: /etc/pki
name: pki
hostNetwork: true
volumes:
- hostPath:
path: /etc/kubernetes
name: k8s
- hostPath:
path: /etc/ssl/certs
name: certs
- hostPath:
path: /etc/pki
name: pki
Ensure the --authorization-mode argument includes Node
Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the --authorization-mode parameter to a value that includes Node.
--authorization-mode=Node,RBAC
Audit:
/bin/ps -ef | grep kube-apiserver | grep -v grep
Expected result:
'Node,RBAC' has 'Node'
Ensure that the --profiling argument is set to false
Remediation: Edit the API server pod specification file /etc/kubernetes/manifests/kube-apiserver.yaml on the master node and set the below parameter.
--profiling=false
Audit:
/bin/ps -ef | grep kube-apiserver | grep -v grep
Expected result:
'false' is equal to 'false'
Fix all of the following violations that were found against the Kubelet:- Ensure the --anonymous-auth argument is set to false.
Remediation: If using a Kubelet config file, edit the file to set authentication: anonymous: enabled to false. If using executable arguments, edit the kubelet service file /etc/systemd/system/kubelet.service.d/10-kubeadm.conf on each worker node and set the below parameter in KUBELET_SYSTEM_PODS_ARGS variable.
--anonymous-auth=false
Based on your system, restart the kubelet service. For example:
systemctl daemon-reload
systemctl restart kubelet.service
Audit:
/bin/ps -fC kubelet
Audit Config:
/bin/cat /var/lib/kubelet/config.yaml
Expected result:
'false' is equal to 'false'
2) Ensure that the --authorization-mode argument is set to Webhook.
Audit
docker inspect kubelet | jq -e '.[0].Args[] | match("--authorization-mode=Webhook").string' Returned Value: --authorization-mode=Webhook Fix all of the following violations that were found against the ETCD:- a. Ensure that the --auto-tls argument is not set to true Do not use self-signed certificates for TLS. etcd is a highly-available key value store used by Kubernetes deployments for persistent storage of all of its REST API objects. These objects are sensitive in nature and should not be available to unauthenticated clients. You should enable the client authentication via valid certificates to secure the access to the etcd service.
Fix - Buildtime
Kubernetes
apiVersion: v1
kind: Pod
metadata:
annotations:
scheduler.alpha.kubernetes.io/critical-pod: ""
creationTimestamp: null
labels:
component: etcd
tier: control-plane
name: etcd
namespace: kube-system
spec:
containers:
- command:
+ - etcd
+ - --auto-tls=true
image: k8s.gcr.io/etcd-amd64:3.2.18
imagePullPolicy: IfNotPresent
livenessProbe:
exec:
command:
- /bin/sh
- -ec
- ETCDCTL_API=3 etcdctl --endpoints=https://[192.168.22.9]:2379 --cacert=/etc/kubernetes/pki/etcd/ca.crt
--cert=/etc/kubernetes/pki/etcd/healthcheck-client.crt --key=/etc/kubernetes/pki/etcd/healthcheck-client.key get foo failureThreshold: 8 initialDelaySeconds: 15 timeoutSeconds: 15 name: etcd-should-fail resources: {} volumeMounts:
- mountPath: /var/lib/etcd
name: etcd-data
- mountPath: /etc/kubernetes/pki/etcd
name: etcd-certs
hostNetwork: true
priorityClassName: system-cluster-critical
volumes:
- hostPath:
path: /var/lib/etcd
type: DirectoryOrCreate
name: etcd-data
- hostPath:
path: /etc/kubernetes/pki/etcd
type: DirectoryOrCreate
name: etcd-certs
status: {}
Explanation:







NEW QUESTION # 64
......

You can conveniently test your performance by checking your score each time you use our Linux Foundation CKS practice exam software (desktop and web-based). It is heartening to announce that all Dumpexams users will be allowed to capitalize on a free Linux Foundation CKS Exam Questions demo of all three formats of Linux Foundation CKS practice test.

CKS Real Testing Environment: https://www.dumpexams.com/CKS-real-answers.html

P.S. Free & New CKS dumps are available on Google Drive shared by Dumpexams: https://drive.google.com/open?id=1sfZTjly0dOvzVuyrLvy8-5DQrzshF-aH