There are three different versions of our NSE7_FSN_AR-7.6 study materials including PDF, App and PC version. Each version has the suitable place and device for customers to learn anytime, anywhere. In order to give you a basic understanding of our various versions, each version offers a free trial. The PDF version of NSE7_FSN_AR-7.6 study materials supports download and printing, so its trial version also supports. You can learn about the usage and characteristics of our NSE7_FSN_AR-7.6 Study Materials in various trial versions, so as to choose one of your favorite in formal purchase. In fact, all three versions contain the same questions and answers.
| Section | Objectives |
|---|---|
| Topic 1: Enterprise Firewall | - Security Fabric integration - Advanced firewall deployment - Routing and advanced networking - Authentication and identity - Centralized management and analytics - VPN technologies - Troubleshooting - High availability |
| Topic 2: SD-WAN | - Application steering - Overlay VPN - SD-WAN architecture - Deployment and troubleshooting - SD-WAN routing - Performance SLA |
>> New NSE7_FSN_AR-7.6 Practice Materials <<
The system of NSE7_FSN_AR-7.6 study materials is very smooth and you don't need to spend a lot of time installing it. We take into account all aspects on the NSE7_FSN_AR-7.6 exam braindumps and save you as much time as possible. After the installation is complete, you can devote all of your time to studying NSE7_FSN_AR-7.6 Exam Questions. And a lot of our worthy customers always praise the high-efficiency of our NSE7_FSN_AR-7.6 learning guide. If you buy it, i guess you will love it as well.
NEW QUESTION # 80
Refer to the exhibit.
The modified output of live routing kemel is shown
Which two statements about the output are (rue? (Choose two.)
Answer: C,D
Explanation:
We must analyze the flags (*, > , S, O, B) and Administrative Distances (AD) shown in the get router info routing-table database exhibit to determine the correct statements.
Analysis for Option A (The BGP route to 10.0.4.0/24 is not in the forwarding information base):
True. Look at the entry for 10.0.4.0/24.
There is an OSPF route: O * > 10.0.4.0/24 [110/2]. The * indicates it is in the FIB, and > indicates it is the selected route.
There is a BGP route: B 10.0.4.0/24 [200/10]. This line lacks the * flag.
Reason: The OSPF route has an Administrative Distance of 110. The BGP route (iBGP) has an AD of 200.
Since 110 is lower than 200, OSPF wins, and the BGP route is not installed in the Forwarding Information Base (FIB).
Analysis for Option B (The default static route through 10.200.1.254 is in the forwarding information base):
True. Look at the 0.0.0.0/0 entries.
The first entry is S * > 0.0.0.0/0 [10/0] via 10.200.1.254.
The * flag confirms this specific route is installed in the FIB.
The second static route (via 10.200.2.254) has a higher distance ([20/0]) and no * flag, so it is inactive.
Why C is False: ECMP (Equal Cost Multi-Path) requires routes to have the same cost/priority. Here, one static route has AD 10 and the other has AD 20. They are not equal, so ECMP is not performed.
Why D is False: The routing table database shows active routes, not the raw Link State Advertisement (LSA) database. You cannot determine the number of LSAs received solely from this output.
Reference:
FortiGate Security 7.6 Study Guide (Routing): " The routing table database displays all known routes... The * indicates the route is in the FIB... Lower Administrative Distance is preferred. "
NEW QUESTION # 81
Refer to the exhibit.
Which Iwo statements about FortiGate behavior relating to this session are correct? (Choose two.)
Answer: A,D
Explanation:
The session output includes the flags:
* state=redir local may_dirty ...
* npu_state=00000000
* offload=0/0
The 7.6 study guide explains these flags directly:
* local = "Session is to/from local stack"
* redir = "Session is being processed by an application layer proxy"
* may_dirty = "Session is allowed by a firewall policy"
This makes C correct, because the local flag means the session either originates from FortiGate or terminates on FortiGate . The FortiOS administration guide states the same meaning: "Session is originated from or destined for local stack." This also makes A correct. The redir flag means the session is handled by an application-layer proxy .
FortiOS documents explain that proxy-based inspection buffers traffic on the FortiGate and inspects it there, and that proxy-based processing is CPU and memory-intensive Since the session also shows no NPU offload (npu_state=00000000, offload=0/0), this traffic is being handled in software/CPU, not by the NPU.
Why the other options are wrong:
* B is wrong because the redir flag proves the session is not passing without inspection; it is being processed by an application-layer proxy
* D is wrong because there is no authentication flag in this session. In Fortinet examples of captive portal/authentication-related sessions, the session state includes auth or authed flags. The study guide shows: "Any session for traffic coming from an authenticated user contains the authed flag." This exhibit does not show auth or authed, so there is no basis to conclude the client was redirected to a captive portal for authentication.
NEW QUESTION # 82
Exhibit.
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
Answer: C,D
Explanation:
From the exhibit, you can observe that the debug output captures an IKEv1 negotiation in aggressive mode.
Let ' s break down the supporting details in line with official Fortinet IPsec VPN troubleshooting resources and debug guides:
For Option B:
The very first line of the debug output shows:
comes 10.0.0.2:500- > 10.0.0.1:500, ifindex=7.
This indicates the traffic direction-from the remote IP (10.0.0.2) with port 500 to the local IP (10.0.0.1) with port 500. According to Fortinet ' s documentation, the right side of the arrow always represents the local FortiGate gateway. Thus, 10.0.0.1 is the local gateway IP address.
For Option D:
You see the statement:
negotiation result " remote "
and
received peer identifier FQDNCE88525E7DE7F00D6C2D3C00000000
Official debug documentation describes that the " peer identifier " or peer ID sent by the initiator is displayed here. In the context of IKE/IPsec negotiation, this value is used as the IPsec peer ID for authentication and identification purposes. The initiator is providing " remote " as the peer ID for its connection.
Why Not A or C:
Perfect Forward Secrecy (PFS): The debug does not show any DH group negotiation in phase 2 (no reference to group2, group5, etc., for phase 2), so you cannot deduce the presence of PFS solely from this output.
Phase 2 negotiation: The log focuses on IKE (phase 1) negotiation and establishment; there's no reference to ESP protocol, Quick Mode, or other identifiers that would show phase 2 SA negotiation and establishment.
This interpretation aligns with the explanation in the FortiOS 7.6.4 Administration Guide ' s VPN section and the official debug command output samples published in Fortinet's documentation. It demonstrates how to distinguish between local and remote addresses and how to identify the use of peer IDs.
References:
FortiOS 7.6.4 Administration Guide: IPsec VPN and Debugging VPNs
Technical Support Resources on interpreting IKE debug output and peer ID roles
NEW QUESTION # 83
Which three common FortiGate-to-collector-agent connectivity issues can you identify using the FSSO real- time debug? (Choose three.)
Answer: B,C,E
Explanation:
The diagnose debug authd fsso server command is the primary tool for troubleshooting communication between the FortiGate and the FSSO Collector Agent. This debug output reveals the status of the connection and the reasons for failure. The three most common connectivity issues identified by this debug are:
FortiGate cannot reach the IP address of the collector agent (Option C): The debug will show connection timeouts or " host unreachable " errors if the Layer 3 connectivity is missing.
The connection was refused / Port mismatch (Option B): If the FortiGate can reach the IP but the Collector Agent is not listening on the specified port (default 8000), the debug will display " Connection refused. " This often happens if the port configured on the FortiGate does not match the listening port on the agent.
The pre-shared key does not match (Option D): If the IP and Port are correct, the next step is authentication. If the password configured on the FortiGate does not match the one on the Collector Agent, the debug will explicitly show an " Authentication failed " or " password mismatch " error during the handshake.
Note on other options: Option A (SSL) is less common than basic connectivity/auth mismatches. Option E (Group filters) relates to user processing logic, which occurs after connectivity is established.
Reference:
FortiGate Security 7.6 Study Guide (FSSO Troubleshooting): " Troubleshooting FSSO... Check connectivity (IP/Port) and authentication (Password). "
NEW QUESTION # 84
Refer to the exhibit.
The output from a collector agent log is shown. The collector agent is showing the status of a workstation as Not Verified . What are two common causes for this message? (Choose two.)
Answer: A,C
Explanation:
The correct answers are B and C .
The study guide has a section titled "Not Verified Status on the Collector Agent" and states:
"The collector agent cannot verify if the user is still logged in" and lists these common causes :
* "A firewall is blocking traffic to port 139 and 445"
* "The workstation remote registry service is not running"
The guide also explains the verification method:
"For WMI polling mode, the collector agent checks the WMI service. For all the other modes, the collector agent checks the HKEY_USERS hive through remote registry services." If the workstation does not respond to these checks, the status can become not verified An additional requirements slide in the same study guide confirms:
* "TCP ports 139 and 445 must be open between the collector agent and all workstations"
* "Remote registry service must be up and running on each workstation"
Why the other options are wrong:
* A is wrong because the study guide mentions a workstation coming out of hibernate mode under a different problem: "No Internet After IP Address Change" , not as a common cause of Not Verified status
* D is wrong because DNS resolution issues are also discussed under the IP address change scenario, where the collector agent uses DNS to resolve the workstation name after an IP change. That is separate from the Not Verified causes listed for this log message So the verified answers are: B, C .
NEW QUESTION # 85
......
The passing rate of our NSE7_FSN_AR-7.6 study materials is the issue the client mostly care about and we can promise to the client that the passing rate of our product is 99% and the hit rate is also high. Our NSE7_FSN_AR-7.6 study materials are selected strictly based on the real NSE7_FSN_AR-7.6 exam and refer to the exam papers in the past years. Our expert team devotes a lot of efforts on them and guarantees that each answer and question is useful and valuable. We also update frequently to guarantee that the client can get more NSE7_FSN_AR-7.6 learning resources and follow the trend of the times. So if you use our study materials you will pass the test with high success probability.
NSE7_FSN_AR-7.6 New Learning Materials: https://www.it-tests.com/NSE7_FSN_AR-7.6.html