ExamPassdump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Fortinet NSE6_FNC_AD-7.6시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ExamPassdump에서는 무료로 24시간 온라인상담이 있으며, ExamPassdump의 덤프로Fortinet NSE6_FNC_AD-7.6시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
| Section | Weight | Objectives |
|---|---|---|
| Integration | 25% | - MDM and third-party device integration - Integration with FortiGate/FortiOS - FortiNAC-F Manager configuration - Syslog and SNMP trap integration |
| Deployment and Provisioning | 30% | - Security policies and enforcement - High Availability (HA) setup and monitoring - Security automation configuration - Access control and logical networks |
| Concepts and Initial Configuration | 25% | - Isolation networks and configuration wizard - Model and organize infrastructure devices - FortiNAC-F architecture and concepts |
| Network Visibility and Monitoring | 20% | - Device profiling and classification - Logging and reporting - Troubleshooting network and device status - Guest and contractor management |
>> Fortinet NSE6_FNC_AD-7.6최신 덤프문제 <<
Fortinet인증 NSE6_FNC_AD-7.6시험을 가장 빠른 시일내에 가장 쉬운 방법으로 패스하는 방법을 고심초사한끝에 ExamPassdump에서 연구해 내었습니다. 그건 바로ExamPassdump의Fortinet인증 NSE6_FNC_AD-7.6덤프로Fortinet인증 NSE6_FNC_AD-7.6시험에 대비하는것입니다. ExamPassdump의Fortinet인증 NSE6_FNC_AD-7.6덤프품질을 검증하려면 구매사이트의 무료샘플을 체험해보시면 됩니다.자격증을 많이 취득하여 멋진 IT전문가로 되세요.
질문 # 55
Refer to the exhibit.
An administrator wants to ensure that guest accounts created from this template are not allowed network access outside of the designated times.
To achieve this, all necessary configurations must be made to force isolation of hosts in which state?
정답：D
설명：
The correct answer is C . The exhibit shows a guest template with Login Availability set to Specify Time , allowing login only Monday through Friday from 6:00 AM to 7:00 PM . The study guide explains that the Account Duration and Login Availability fields define when the account is deleted from the database or what days and times the account is enabled. Therefore, outside the allowed login window, the guest cannot authenticate successfully using that guest account.
To stop network access outside those permitted times, FortiNAC-F must isolate hosts that are in the Not Authenticated state. The guide maps the Authentication captive network to hosts in the Not Authenticated state, and the isolation logic table shows that hosts in the Not Authenticated state are moved to the Authentication network when the point of connection is in the Forced Authentication group.
Option A is wrong because At-risk hosts are isolated to remediation/quarantine due to compliance or security posture problems, not because a guest login is outside allowed hours. Option B is wrong because Disabled hosts are intentionally disabled and sent to the dead-end network; the account here is time-restricted, not necessarily disabled. Option D is wrong because Rogue applies to unregistered or unclassified devices, while this scenario is about a known guest account that is not allowed to authenticate outside its login schedule.
질문 # 56
Refer to the exhibit. An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization. Each building uses its own local VLAN for printers.
Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?
정답：D
설명：
The FortiNAC-F Logical Network feature is specifically designed to provide an abstraction layer between high-level security policies and the underlying physical network infrastructure. In large- scale deployments where different physical locations (like Building 1, 2, and 3 in the exhibit) use different local VLAN IDs for the same type of device (e.g., VLAN 10, 20, and 30 for printers), managing separate policies for each building would create significant administrative overhead.
By using a Logical Network, an administrator can create a single entity--for example, a logical network named "Printers"--and use it as the "Access Value" in a single Network Access Policy.
The mapping of this logical label to a specific physical VLAN occurs at the Model Configuration level for each network device. When a printer connects to a switch in Building 1, FortiNAC-F evaluates the policy, identifies that the printer should be in the "Printers" logical network, and checks the Model Configuration for that specific switch to see which VLAN ID is mapped to that label (VLAN 10). If the same printer moves to Building 3, the same single policy applies, but FortiNAC-F provisions it to VLAN 30 based on the local mapping for that building's switch.
This architectural approach ensures that policies remain consistent and easy to manage regardless of the complexity or variations in the local network topology.
"Logical Networks provide a way to define a network access requirement once and apply it across many different network devices that may use different VLAN IDs for that access... Each managed device can use different VLAN IDs for the same Logical Network label. You can define the Logical Networks based on requirements and then associate the network to a VLAN ID when the managed device is configured in the Model Configuration."
질문 # 57
Where should you configure MAC notification traps on a supported switch?
정답：B
설명：
In FortiNAC-F,MAC notification traps(also known as MAC Move or MAC Change traps) are essential for achieving real-time visibility of endpoint connections and disconnections. When a device connects to a switch port, the switch generates an SNMP trap that informs FortiNAC-F of the new MAC address on that specific interface. This allows FortiNAC-F to immediately initiate the profiling and policy evaluation process without waiting for the next scheduled L2 poll.
According to theFortiNAC-F Administration GuideandSwitch Integrationdocumentation, MAC notification traps should be configured onall ports except uplink ports. Uplink ports are the interfaces that connect one switch to another or to the core network. Because these ports see the MAC addresses of every device on the downstream switches, enabling MAC notification on uplinks would cause the switch to send a massive volume of redundant traps to FortiNAC-F every time any device anywhere in the downstream branch moves or reconnects. This can overwhelm the FortiNAC-F process queue and degrade system performance.
By only enabling these traps on " edge " or " access " ports-where individual endpoints like PCs, printers, and VoIP phones connect-FortiNAC-F receives precise data regarding exactly where a device is physically located. Uplinks should be identified in the FortiNAC-F inventory as " Uplink " or " Learned Uplink, " which tells the system to ignore MAC data seen on those specific ports.
" To ensure accurate host tracking and optimal system performance, SNMP MAC notification traps must be enabled on all access (downlink) ports.Do not enable MAC notification traps on uplink ports, as this will result in excessive and unnecessary trap processing. Uplink ports should be excluded to prevent the system from attempting to map multiple downstream MAC addresses to a single infrastructure interface. " - FortiNAC-F Administration Guide: SNMP Configuration for Network Devices.
질문 # 58
An administrator manages a corporate environment where all users log into the corporate domain each time they connect to the network. The administrator wants to leverage login scripts to use a FortiNAC-F agent to enhance endpoint visibility. Which agent can be deployed as part of a login script?
정답：C
설명：
The Passive Agent is the agent specifically associated in the FortiNAC-F 7.6 curriculum with domain login
/logoff scripts . The Study Guide states that the Passive Agent is "deployed by a login/logoff script" and is designed to register and scan Windows endpoints joined to a domain when a domain user logs in .
The administrator places the Passive Agent executable in a user-accessible location, such as SYSVOL , configures the FortiNAC-F server information through administrative templates, and invokes the executable through the domain controller ' s login/logoff scripts. This allows FortiNAC-F to obtain endpoint information and track users without requiring interactive installation by the user. Passive Agent configurations can register the user and associated host, perform compliance scanning if configured, and track login/logout activity.
The Administration Guide reinforces this workflow by specifying GPO User Configuration > Windows Settings > Scripts (Logon/Logoff) and using the Passive Agent with -logon and -logoff parameters.
Therefore, the exam-specific answer is Passive Agent .
Study Guide Reference: Identification and Classification of Rogues # Passive Agent , pp. 125-126 .
질문 # 59
Which two things must be done to allow FortiNAC to process incoming syslog messages from an unknown vendor? (Choose two.)
정답：B,C
질문 # 60
......
ExamPassdump는IT업계전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다. 우리는 꼭 한번에Fortinet NSE6_FNC_AD-7.6시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은Fortinet NSE6_FNC_AD-7.6시험자료 구매로 제일 정확하고 또 최신시험버전의 문제와 답을 사용할 수 있습니다. Pass4Tes의 인증시험적중 율은 아주 높습니다. 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다.
NSE6_FNC_AD-7.6퍼펙트 최신버전 공부자료: https://www.exampassdump.com/NSE6_FNC_AD-7.6_valid-braindumps.html