Reliable NSE6_SDW_AD-7.6 Test Questions - New NSE6_SDW_AD-7.6 Exam Pdf

P.S. Free & New NSE6_SDW_AD-7.6 dumps are available on Google Drive shared by PrepAwayETE: https://drive.google.com/open?id=12x5gd3I6pN-r2UqG6ECUds0pMUS_kxs0

PrepAwayETE is continuing to provide the candidates with Fortinet certification exam-related reference materials for years. PrepAwayETE is the website that is validated by all the NSE6_SDW_AD-7.6 test-takers, which can provide all candidates with the best questions and answers. PrepAwayETE comprehensively ensures the interests of all candidates, which enjoys immense praise of the candidates. Moreover PrepAwayETE is the most trusted website on the current market.

Fortinet NSE6_SDW_AD-7.6 Exam Syllabus Topics:

Section	Weight	Objectives
Centralized Management and Orchestration	15%	- SD-WAN Manager and overlay orchestration - Deploy and manage SD-WAN via FortiManager - Monitoring, logging and reporting - Branch configuration deployment and templates
SD-WAN Rules and Traffic Steering	20%	- Design application-based and performance-based rules - SD-WAN routing and path selection logic - Configure traffic steering policies - High availability and load balancing
SD-WAN Troubleshooting and Optimization	15%	- Resolve ADVPN and connectivity problems - Performance optimization and error correction - Troubleshoot SD-WAN rules and session behavior - Diagnose routing and path selection issues
SD-WAN Setup and Configuration	20%	- Quality of Service (QoS) integration - Design SD-WAN members, zones and interfaces - Implement Performance SLAs and link monitoring - Configure SD-WAN settings and profiles
Advanced IPsec and Topologies	15%	- ADVPN configuration and operation - Multihub, multiregion and large-scale deployments - Hub-and-spoke and full-mesh IPsec architectures - IPsec security and encryption settings
SD-WAN Fundamentals and Architecture	15%	- Application-aware networking concepts - Underlay vs Overlay networks - Enterprise SD-WAN architecture and components - Deployment models and design principles

>> Reliable NSE6_SDW_AD-7.6 Test Questions <<

100% Pass Quiz Trustable NSE6_SDW_AD-7.6 - Reliable Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Test Questions

The PrepAwayETE is committed to ace your Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator (NSE6_SDW_AD-7.6) exam preparation and ensure your success on the first attempt. To achieve this objective the PrepAwayETE is offering top-rated, real, and updated Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator (NSE6_SDW_AD-7.6) exam questions in three different formats. The names of these formats are NSE6_SDW_AD-7.6 PDF dumps file, desktop practice test software, and web-based practice test software.

Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Sample Questions (Q79-Q84):

NEW QUESTION # 79
Refer to the exhibit. The administrator used the SD-WAN overlay template to prepare an IPsec tunnels configuration for a hub-and-spoke SD-WAN topology. The exhibit shows the FortiManager installation preview for one FortiGate device.
Based on the exhibit, which statement best describes the configuration applied to the FortiGate device?

A. It is a spoke device that establishes dynamic IPsec tunnels to the hub It can send ADVPN shortcut requests.
B. It is a spoke device that establishes dynamic IPsec tunnels to the hub. The local subnet range is
10.10.128.0/23.
C. It is a hub device. It will automatically discover the spoke devices and add them to the SD-WAN topology.
D. It is a hub device. It can send ADVPN shortcut offers.

Answer: D

Explanation:
The phase1-interface shows set type dynamic, set peertype any, and set mode-cfg enablewith an address pool (ipv4-start-ip, ipv4-end-ip, ipv4-netmask). Those are dial-up server settings-i.e., a hub handing out virtual IPs to spokes. It also has set auto- discovery-sender enable, allowing the hub to participate in ADVPN shortcut negotiation (sending offers).

NEW QUESTION # 80
Refer to the exhibits. The first exhibit shows the SD-WAN zone HUB1 and SD-WAN member configuration from an SD-WAN template, and the second exhibit shows the output of command diagnose sys sdwan membercollected on a FortiGate device.
Which statement best describes what the diagnose output shows?

A. The diagnose output does not correspond to a device configured with the SD-WAN template shown in the exhibit.
B. The diagnose output was collected on the device branch1_fgt.
C. The diagnose output shows that HUB1-VPN1 and all HUBx-VPNy members are dead.
D. The diagnose output was collected on the device branch2_fgt.

Answer: B

Explanation:
The diagnose output lists SD-WAN members 4(HUB1-VPN1), 5(HUB1-VPN2), 7(HUB2-VPN1),
8(HUB2-VPN2), and 9(HUB2-VPN3). It does not include member 6 (HUB1-VPN3). From the template, HUB1-VPN3 is installed only on branch2_fgt and branch3_fgt - not on branch1_fgt.
Therefore, the output must be from branch1_fgt.

NEW QUESTION # 81
Refer to the exhibit.

The exhibit shows the health-check configuration on a FortiGate device used as a spoke. You notice that the hub FortiGate doesn't prioritize the traffic as expected.
Which two configuration elements should you check on the hub? (Choose two.)

A. The performance SLA has the parameter priority-out-sla configured.
B. The performance SLA uses the same criteria.
C. The performance SLA is configured with set embedded-measure accept.
D. This performance SLA uses the same members.

Answer: A,B

NEW QUESTION # 82
Refer to the exhibit that shows a diagnose output on FortiGate.

Based on the output shown in the exhibit, what can you say about the device role and how it handles health checks?

A. The device is a spoke. It receives health-check measures for the tunnels of another spoke.
B. The device is a hub. It receives embedded health-check measures for each tunnel from the spoke.
C. The device is a spoke. It provides embedded health-check measures for each tunnel to the hub.
D. The device is a hub. It receives health-check measures for the tunnels of a spoke.

Answer: A

NEW QUESTION # 83
Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over HUB1- VPN1. However, the traffic is routed over HUB1-VPN3.
Based on the output shown in the exhibit, which two reasons, individually or together, could explain the observed behavior? (Choose two.)

A. HUB1-VPN3 has a higher member configuration priority than HUB1-VPN1.
B. The traffic matches a regular policy route configured with HUB1-VPN3 as the outgoing device.
C. HUB1-VPN1 does not have a valid route to the destination.
D. HUB1-VPN3 has a lower route priority value (higher priority) than HUB1-VPN1.

Answer: B,C

Explanation:
A policy route takes precedence over SD-WAN rules when it matches the traffic, so if a policy route is configured to use HUB1-VPN3, the traffic will bypass the expected SD-WAN rule and be forced onto that interface. In addition, HUB1-VPN1 does not have a valid route for the 10.0.0.0/8 destination in the routing table, which prevents SD-WAN from selecting it as a viable path, resulting in traffic being sent through HUB1-VPN3 instead.

NEW QUESTION # 84
......

Are you still hesitating about which kind of NSE6_SDW_AD-7.6 exam torrent should you choose to prepare for the exam in order to get the related certification at ease? I am glad to introduce our NSE6_SDW_AD-7.6 study materials to you. Our company has already become a famous brand all over the world in this field since we have engaged in compiling the NSE6_SDW_AD-7.6 practice materials for more than ten years and have got a fruitful outcome. In order to let you have a general idea about our NSE6_SDW_AD-7.6 training materials, we have prepared the free demo in our website for you to download.

New NSE6_SDW_AD-7.6 Exam Pdf: https://www.prepawayete.com/Fortinet/NSE6_SDW_AD-7.6-practice-exam-dumps.html

BTW, DOWNLOAD part of PrepAwayETE NSE6_SDW_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=12x5gd3I6pN-r2UqG6ECUds0pMUS_kxs0