New Cisco 350-501 Study Materials - 350-501 Updated CBT

P.S. Free 2026 Cisco 350-501 dumps are available on Google Drive shared by Itbraindumps: https://drive.google.com/open?id=1pxyc-NUbOH6iqLL0jAT6Cc6ADmd7eWvC

Laziness will ruin your life one day. It is time to have a change now. Although we all love cozy life, we must work hard to create our own value. Then our 350-501 training materials will help you overcome your laziness. Study is the best way to enrich your life. On one hand, you may learn the newest technologies in the field with our 350-501 Study Guide to help you better adapt to your work, and on the other hand, you will pass the 350-501 exam and achieve the certification which is the symbol of competence.

Cisco 350-501 Exam Syllabus Topics:

Section	Weight	Objectives
Automation and Assurance	20%	- Describe the programmable, software-defined network - Describe telemetry - Implement network assurance with Cisco DNA Center - Configure and verify NETCONF/RESTCONF - Describe Cisco NSO - Configure and verify YANG models - Describe automation and assurance tools
Core Architecture	15%	- Describe service provider virtualization - Describe Cisco network software architecture - Describe management plane security - Describe service provider architectures - Configure and verify control plane security - Implement data plane security - Describe QoS architecture
Services	20%	- Implement multicast services - Describe broadband subscriber services - Implement QoS services - Describe VPN technologies - Configure L2VPN and Carrier Ethernet - Configure L3VPN
Networking	25%	- Describe BGP path selection algorithm - Describe IPv6 transition - Implement BGP - Troubleshoot routing protocols - Implement OSPF - Implement routing policy language and route maps - Implement segment routing - Implement IS-IS - Implement MPLS
MPLS and Segment Routing	20%	- Implement MPLS Layer 3 VPNs - Implement segment routing - Describe MPLS OAM - Implement segment routing traffic engineering (SR-TE) - Implement MPLS Layer 2 VPNs - Describe EVPN

>> New Cisco 350-501 Study Materials <<

Famous 350-501 Exam Guide: Implementing and Operating Cisco Service Provider Network Core Technologies Bring You Pass-Guaranteed Training Dumps - Itbraindumps

Our 350-501 exam materials have helped many people improve their soft power. They are now more efficient than their colleagues, so they have received more attention from their leaders. We are all ordinary professional people. We must show our strength to show that we are worth the opportunity. Using 350-501 practice engine may be the most important step for you to improve your strength. You know, like the butterfly effect, one of your choices may affect your life. And our 350-501 Exam Questions will be the right exam tool for you to pass the 350-501 exam and obtain the dreaming certification.

Cisco Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions (Q409-Q414):

NEW QUESTION # 409
Refer to the exhibit. CE1 and CE2 require connectivity to the internet through the ISP connected to PE3. What should an engineer configure to complete this task?

A. CE1 and CE2 must be configured to use a static default route with a next-hop of PE3 to reach internet routes.
B. PE2 must be configured to serve as a route reflector for PE3 routes learned from the internet. PE2 then shares the routes with CE1 and CE2.
C. PE1 must be configured with an import route target in the CE1 VRF that matches the export route target for the internet VRF on PE3.
D. CE1 and CE2 must be configured with a route distinguisher in the PE1 VRF that dynamically imports the route from the internet.

Answer: B

NEW QUESTION # 410
Refer to the exhibit. OSPF is running in the given network. R1 was previously running EIGRP on a standalone network, and a network engineer just migrated it to OSPF. The R1 peering with R2 has come up. Which additional action must the engineer take so that R2 receives routes from Area 1 and Area 0 but it is prevented from receiving routes from Area 2?

A. Implement a route map that matches R2's interface to R3 and R4, and then attach the route map to an inbound distribute list on R2.
B. Implement a route map that matches R1's next-hop address, and then attach the route map to an outbound distribute list on R2.
C. Implement a route map that matches the routes from Area 2 in a prefix list, and then attach the route map to an outbound distribute list on R2.
D. Implement a route map that matches the routes in an ACL from Area 2, and then attach the route map to an inbound distribute list on R2.

Answer: D

Explanation:
To stop R2 from installing routes learned from Area 2 while still allowing routes from Area 0 and Area 1, the correct method is to filter OSPF routes on R2 as they are learned. This is done with an inbound distribute-list that references a route map which matches the specific prefixes originating from Area 2 using an access control list.

NEW QUESTION # 411
Refer to the exhibit. Router R1 is reporting that its BGP neighbor adjacency to router R2 is down, but its state is Active as shown.
Which configuration must be applied to routers R1 and R2 to fix the problem?

Answer: A

NEW QUESTION # 412
What is a constraint of Cisco MPLS TE tunnel configurations?

A. Tunnels cannot span multiple OSPF areas.
B. QoS-aware tunneling is not supported.
C. With ISIS as an IGP. only older-style metrics are used.
D. Tunnels cannot be configured over IP unnumbered links.

Answer: D

NEW QUESTION # 413

Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise then into OSPF area 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default router 0.0.0.0/0 is still missing. Which configuration must an engineer apply to resolve this problem?

A. Option A
B. Option D
C. Option B
D. Option C

Answer: A

Explanation:
The issue of the OSPF domain receiving only the 172.17.1.0/24 route and not the default route 0.0.0.0/0 can be resolved by configuring OSPF to propagate default routes. Let's take a look at the options:
* Option A: The configuration includes the following commands:
* router ospf 1
* default-information originate
* end
This configuration generates a default route into the OSPF domain, which is missing in this scenario.

NEW QUESTION # 414
......

Based on high-quality products, our 350-501 guide torrent has high quality to guarantee your test pass rate, which can achieve 98% to 100%. 350-501 study tool is updated online by our experienced experts, and then sent to the user. So you don’t need to pay extra attention on the updating of study materials. The data of our 350-501 Exam Torrent is forward-looking and can grasp hot topics to help users master the latest knowledge. If you are not reconciled and want to re-challenge yourself again, we will give you certain discount.

350-501 Updated CBT: https://www.itbraindumps.com/350-501_exam.html

P.S. Free 2026 Cisco 350-501 dumps are available on Google Drive shared by Itbraindumps: https://drive.google.com/open?id=1pxyc-NUbOH6iqLL0jAT6Cc6ADmd7eWvC