JN0-364최신인증시험자료 & JN0-364인증시험덤프자료

그리고 Fast2test JN0-364 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1z1-CR-5k1XJZkVb4GvQnhEFyxhpa3lmm

Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Juniper인증JN0-364시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: MPLS and Service Provider Technologies- MPLS fundamentals
  • 1. Label switching and forwarding
    • 2. LDP operations
      - VPN services
      • 1. Layer 3 VPN concepts
        • 2. Layer 2 VPN overview
          Topic 2: OSPF and IS-IS Routing Protocols- IS-IS operation in service provider networks
          • 1. LSP and SPF calculation
            • 2. Levels and routing hierarchy
              - OSPF configuration and troubleshooting
              • 1. Adjacency and neighbor states
                • 2. Areas and LSAs
                  Topic 3: Troubleshooting and Operations- Performance and monitoring
                  • 1. Traffic analysis basics
                    • 2. System logging and alarms
                      - Network troubleshooting methodology
                      • 1. Junos operational commands
                        • 2. Protocol verification tools
                          Topic 4: Service Provider Architecture & Junos Fundamentals- Service provider network design basics
                          • 1. Core, edge, and access architecture
                            • 2. Scalability considerations
                              - Junos OS routing fundamentals
                              • 1. Routing table and forwarding concepts
                                • 2. Junos CLI and configuration hierarchy
                                  Topic 5: BGP and Routing Policy- BGP fundamentals
                                  • 1. Attributes and path selection
                                    • 2. eBGP and iBGP operations
                                      - Routing policy control
                                      • 1. Route filtering and manipulation
                                        • 2. Import/export policies

                                          >> JN0-364최신 인증시험자료 <<

                                          JN0-364인증시험 덤프자료, JN0-364높은 통과율 시험공부

                                          불과 1,2년전만 해도 Juniper JN0-364덤프를 결제하시면 수동으로 메일로 보내드리기에 공휴일에 결제하시면 덤프를 보내드릴수 없어 고객님께 페를 끼쳐드렸습니다. 하지만 지금은 시스템이 업그레이드되어Juniper JN0-364덤프를 결제하시면 바로 사이트에서 다운받을수 있습니다. Fast2test는 가면갈수록 고객님께 편리를 드릴수 있도록 나날이 완벽해질것입니다.

                                          최신 JNCIS-SP JN0-364 무료샘플문제 (Q39-Q44):

                                          질문 # 39
                                          You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured. Which statement is true in this scenario?

                                          정답:B

                                          설명:
                                          The root bridge in a spanning-tree network is the bridge with the smallest or the lowest bridge ID.
                                          In the absence of a manually configured priority, the Spanning Tree Protocol (STP) elects the root bridge based on the lowest bridge ID, which is a combination of the priority and the MAC address.
                                          The device with the lowest MAC address will have the lowest bridge ID and thus be elected as the root bridge.


                                          질문 # 40
                                          You are configuring BGP for IPv6 operations. In this scenario, which two statements are correct? (Choose two.)

                                          정답:A,D

                                          설명:
                                          When implementingMultiprotocol BGP (MP-BGP)for IPv6, several architectural constants remain consistent with the original BGP design, while others have evolved to accommodate larger network scales.
                                          Router ID (Option C):
                                          A critical point in Juniper's Service Provider documentation is that theBGP Router IDremains a32-bit value, even when the protocol is carrying 128-bit IPv6 prefixes. The Router ID is typically represented in dotted- quad notation (e.g., 192.168.1.1). In an IPv6-only environment, a Juniper router cannot automatically derive this ID from an interface address, so it must be manually defined under [edit routing-options]. This 32-bit ID is essential for BGP tie-breaking and loop prevention within the AS.
                                          Autonomous System Number (Option D):
                                          TheAutonomous System Number (ASN)was originally a 16-bit value (0 to 65535). However, to address the exhaustion of available ASNs, the standard was extended to32-bit ASNs(documented in RFC 6793). In Junos OS, you can configure BGP using either the older 16-bit format or the newer 32-bit format (often represented in "asplain" or "asdot" notation). While the question mentions a 64-bit value, there is currently no standard for a 64-bit ASN in BGP; the transition from 16-bit to 32-bit satisfies current global scalability needs. Therefore, Option D is the most accurate within the context of current networking standards, as it acknowledges the coexistence of different ASN lengths.


                                          질문 # 41
                                          You are designing an MPLS network and want to ensure that traffic traverses an LSP between PE routers that follow an explicit path through the core. Which protocol would accomplish this task?

                                          정답:D

                                          설명:
                                          In a Juniper Networks MPLS environment, the selection of a signaling protocol depends heavily on the requirement for traffic engineering and path control. To satisfy the requirement for anexplicit path-where the network architect defines specific hop-by-hop routers that the traffic must traverse-theResource Reservation Protocol (RSVP)is the necessary choice.
                                          According to Juniper documentation, RSVP (specifically RSVP-TE) supports the use ofExplicit Route Objects (EROs). When you configure an LSP in Junos OS, you can define a path consisting of a series of IP addresses (strict or loose hops). RSVP then signals the LSP along that exact sequence of routers, reserving resources and establishing labels as it goes. This allows for precise control over the network's traffic patterns, enabling administrators to steer traffic away from congested links or toward specific high-bandwidth paths.
                                          In contrast,LDP (Label Distribution Protocol)(Option D) is a "best-effort" signaling protocol. LDP strictly follows the Interior Gateway Protocol (IGP) shortest path. It does not support explicit paths or traffic engineering constraints; it simply builds a "mesh" of labels based on the existing routing table.IS-IS(Option C) is an IGP used to populate the routing table and TED but does not signal labels.BGP(Option A) is used for service delivery (like L3VPNs) but relies on an underlying transport LSP (built by RSVP or LDP) to reach its next hop. Therefore, only RSVP provides the mechanism for explicit path manipulation.


                                          질문 # 42
                                          You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)

                                          정답:A,C

                                          설명:
                                          In Junos OS, traffic engineering extensions for OSPF, which are required for an LSP to use the OSPF link state database for path computations, are not enabled by default. They must be explicitly enabled in the OSPF configuration. Therefore, answer C is correct. Answer B is incorrect and contradicts C. The 'no-cspf' command would disable CSPF (Constrained Shortest Path First), which is used for path computations in MPLS traffic engineering, so it should not be used if you want the LSP to utilize OSPF's link state database for path computations. Therefore, answer A is incorrect. The 'policing' parameter is not relevant to enabling traffic engineering extensions in OSPF, so answer D is incorrect.


                                          질문 # 43
                                          Click the Exhibit button. A router called R6 is the ingress router for an LSP called R6_TO_R10_700m.
                                          Referring to the exhibit, which statement is correct about the bandwidth reservation across this entire path?

                                          정답:C

                                          설명:
                                          The output shows the LSP bandwidth is 700 Mbps and its RSVP priorities are set with a setup priority of 2 and a holding priority of 1. Bandwidth admission and reservation along the path are evaluated using the setup priority, so the 700 Mbps is accounted against the unreserved bandwidth buckets for setup priority 2 and all lower-preference priorities below it.


                                          질문 # 44
                                          ......

                                          IT업계에 계속 종사할 의향이 있는 분들께 있어서 국제공인 자격증 몇개를 취득하는건 반드시 해야하는 선택이 아닌가 싶습니다. Juniper JN0-364 시험은 국제공인 자격증시험의 인기과목으로서 많은 분들이 저희Juniper JN0-364덤프를 구매하여 시험을 패스하여 자격증 취득에 성공하셨습니다. Juniper JN0-364 시험의 모든 문제를 커버하고 있는 고품질Juniper JN0-364덤프를 믿고 자격증 취득에 고고싱~!

                                          JN0-364인증시험 덤프자료: https://kr.fast2test.com/JN0-364-premium-file.html

                                          그 외, Fast2test JN0-364 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1z1-CR-5k1XJZkVb4GvQnhEFyxhpa3lmm