What's more, part of that Prep4SureReview CWNA-109 dumps now are free: https://drive.google.com/open?id=1U9Msk5WlGaYL-BvmpO0iKgeoBBWEkSy8
As is known to us, a suitable learning plan is very important for all people. For the sake of more competitive, it is very necessary for you to make a learning plan. We believe that the Software version of our CWNA-109 actual exam will help you make a good learning plan which is a model test in limited time simulating the Real CWNA-109 Exam, if you finish the model CWNA-109 test, our system will generate a report according to your performance.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> Reliable CWNA-109 Exam Simulations <<
Before the clients purchase our CWNA-109 study materials, they can have a free trial freely. The clients can log in our company’s website and visit the pages of our products. The pages of our products lists many important information about our CWNA-109 study materials and they include the price, version and updated time of our products, the exam name and code, the total amount of the questions and answers, the merits of our CWNA-109 Study Materials and the discounts. You can have a comprehensive understanding of our CWNA-109 study materials after you see this information. Then you can look at the free demos and try to answer them to see the value of our CWNA-109 study materials and finally decide to buy them or not.
NEW QUESTION # 169
What is required when operating 802.11ax APS in the 6 GHz band using passphrase-based authentication?
* VHT PHY
Answer: B
Explanation:
SAE (Simultaneous Authentication of Equals) is required when operating 802.11ax APs in the 6 GHz band using passphrase-based authentication. SAE is a secure and robust authentication method that is defined in the IEEE 802.11s amendment and is also known as WPA3-Personal or WPA3-SAE. SAE is based on a cryptographic technique called Dragonfly Key Exchange, which allows two parties to establish a shared secret key using a passphrase, without revealing the passphrase or the key to an eavesdropper or an attacker. SAE also provides forward secrecy, which means that if the passphrase or the key is compromised in the future, it does not affect the security of past communications.
SAE is required when operating 802.11ax APs in the 6 GHz band using passphrase-based authentication because of the new regulations and standards that apply to this band. The 6 GHz band is a new frequency band that was opened for unlicensed use by the FCC and other regulatory bodies in 2020. The 6 GHz band offers more spectrum and less interference than the existing 2.4 GHz and 5 GHz bands, which can enable higher performance and efficiency for Wi-Fi devices. However, the 6 GHz band also has some restrictions and requirements that are different from the other bands, such as:
* The 6 GHz band is divided into two sub-bands: U-NII-5 (5925-6425 MHz) and U-NII-7 (6525-6875 MHz). The U-NII-5 sub-band is subject to DFS (Dynamic Frequency Selection) rules, which require Wi-Fi devices to monitor and avoid using channels that are occupied by radar systems or other primary users. The U-NII-7 sub-band is not subject to DFS rules, but it has a lower maximum transmit power limit than the U-NII-5 sub-band.
* The Wi-Fi devices that operate in the 6 GHz band are called 6E devices, which stands for Extended Spectrum. 6E devices must support 802.11ax technology, which is also known as Wi-Fi 6 or High Efficiency (HE). 802.11ax is a new standard that improves the performance and efficiency of Wi-Fi networks by using features such as OFDMA (Orthogonal Frequency Division Multiple Access), MU-MIMO (Multi-User Multiple Input Multiple Output), BSS Coloring, TWT (Target Wake Time), and HE PHY and MAC enhancements.
* The 6E devices that operate in the 6 GHz band must also support WPA3 security, which is a new security protocol that replaces WPA2 and provides stronger encryption and authentication for Wi-Fi networks. WPA3 has two modes: WPA3-Personal and WPA3-Enterprise. WPA3-Personal uses SAE as its authentication method, which requires a passphrase to establish a secure connection between two devices. WPA3-Enterprise uses EAP (Extensible Authentication Protocol) as its authentication method, which requires a certificate or a credential to authenticate with a server.
Therefore, SAE is required when operating 802.11ax APs in the 6 GHz band using passphrase-based authentication because it is part of WPA3-Personal security, which is mandatory for 6E devices in this band.
References: , Chapter 3, page 120; , Section 3.2
9of30
NEW QUESTION # 170
Which 802.11 frame type is used by a station to request permission from an AP to leave power save mode and retrieve buffered frames?
Answer: A
Explanation:
A PS-Poll (Power Save Poll) frame is a control frame sent by a client station operating in legacy power save mode to request that the AP deliver any buffered unicast frames that arrived while the station was asleep. The AP announces buffered frames for sleeping stations using the Traffic Indication Map (TIM) field within its Beacon frames. Newer power management mechanisms, such as U-APSD and TWT, provide more efficient alternatives to the legacy PS-Poll mechanism.
NEW QUESTION # 171
You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?
Answer: A
Explanation:
A 5 GHz channel should be used for this AP because channels 1 and 6 are 2.4 GHz channels and they have no impact on the decision. The 5 GHz frequency band offers more non-overlapping channels than the 2.4 GHz frequency band, which reduces interference and improves performance. The 5 GHz frequency band also supports higher data rates and wider channel bandwidths than the 2.4 GHz frequency band, which increases capacity and throughput. The 5 GHz frequency band also has less interference from other devices and sources than the 2.4 GHz frequency band, which enhances reliability and quality of service. Therefore, it is recommended to use the 5 GHz frequency band for WLANs whenever possible. Channels 1 and 6 are two of the three non-overlapping channels in the 2.4 GHz frequency band (the other one is channel 11). They are used by a neighbor network in this scenario, but they do not affect the channel selection for this AP because they operate in a different frequency band than the 5 GHz frequency band. Channel 6 is not always best to use; it depends on the interference and congestion level in the environment. Channel 1 is not best to use because it has a lower frequency than channel 6; frequency does not determine channel quality or performance. Channel
11 is not best to use because it is also a 2.4 GHz channel and it may interfere with channels 1 and
6. References: CWNA-109 Study Guide, Chapter 4: Antenna Systems and Radio Frequency (RF) Components, page 113
NEW QUESTION # 172
You are implementing a VHT-capable AP. Which one of the following channels is available in the 802.11-
2016 standard that was not available before the ratification of 802.11 ac?
Answer: C
Explanation:
Channel 144 is a new channel that was added to the 5 GHz band by the 802.11ac amendment, which defines the VHT (Very High Throughput) PHY for WLANs. Channel 144 has a center frequency of 5720 MHz and a bandwidth of 20 MHz. It can also be combined with adjacent channels to form wider channels of 40 MHz, 80 MHz, or 160 MHz. Channel 144 is available in some regions, such as North America and Europe, but not in others, such as Japan and China . References: [CWNA-109 Study Guide], Chapter 3: Antennas and Accessories, page 121; [CWNA-109 Study Guide], Chapter 3: Antennas and Accessories, page 115;
[Wikipedia], List of WLAN channels.
NEW QUESTION # 173
What term describes the physical coverage area of a single access point, within which a client station can successfully communicate with that specific AP?
Answer: C
Explanation:
The Basic Service Area (BSA) refers to the physical RF coverage area of a single access point, meaning the geographic region within which client stations can successfully associate and communicate with that AP. This differs from the Basic Service Set (BSS), which refers to the logical grouping of the AP and its associated stations, rather than the physical coverage area itself. Multiple overlapping BSAs, each belonging to a different AP, together make up the coverage area of an Extended Service Set.
NEW QUESTION # 174
......
As we all know that, first-class quality always comes with the first-class service. There are also good-natured considerate after sales services offering help on our CWNA-109 study materials. All your questions about our CWNA-109 practice braindumps are deemed as prior tasks to handle. So if you have any question about our CWNA-109 Exam Quiz, just contact with us and we will help you immediately. That is why our CWNA-109 learning questions gain a majority of praise around the world.
Vce CWNA-109 Torrent: https://www.prep4surereview.com/CWNA-109-latest-braindumps.html
BONUS!!! Download part of Prep4SureReview CWNA-109 dumps for free: https://drive.google.com/open?id=1U9Msk5WlGaYL-BvmpO0iKgeoBBWEkSy8