What's more, part of that BraindumpsVCE CWNA-109 dumps now are free: https://drive.google.com/open?id=1tge-V6p2zeOJ9_ei6GHh3WLNQJgLEFU-
BraindumpsVCE's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers. These study questions are most likely to appear in the actual exam. The Certification exams are actually set randomly from the database of CWNA-109. Thus most of the questions are repeated in CWNA-109 Exam and our experts after studying the previous exam have sorted out the most important questions and prepared dumps out of them. Hence BraindumpsVCE's dumps are a special feast for all the exam takers and sure to bring them not only exam success but also maximum score.
| Section | Weight | Objectives |
|---|---|---|
| WLAN Network Security | 15% | - Security threats and mitigation
|
| WLAN Protocols and Devices | 20% | - Wireless hardware and software
|
| WLAN Regulations and Standards | 15% | - Regulatory bodies and frequency bands
|
| Radio Frequency (RF) Technologies | 20% | - Antenna concepts and types
|
| WLAN Troubleshooting and Management | 15% | - Performance and connectivity issues
|
| WLAN Network Architecture and Design Concepts | 15% | - Network design principles
|
>> CWNA-109 Latest Dumps Book <<
The BraindumpsVCE recognizes that CWNP CWNA-109 aspirants are constantly juggling multiple responsibilities, so questions are ideal for quick preparation. Applicants can access these questions anywhere and at any time, using any smart device, which allows them to learn at their own pace. The CWNP Wireless Network Administrator (CWNA) (CWNA-109) Questions are portable and you can also print them.
NEW QUESTION # 126
You are attempting to locate the cause of a performance problem in two WLAN cells in a mostly overlapping coverage area. You note that one AP is on channel 1 and the other is on channel 2. When you document your findings, what term do you use to describe the problem in this configuration?
Answer: C
NEW QUESTION # 127
You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day. You analyze the workspace outside of business hours and detect a strong signal with a typical noise floor at the client location. During working hours, the user works with a laptop in the area and uses an external USB hard drive for continuous data access. The user also states that the laptop works as expected on her home network. The user working approximately 8 feet away from this client experiences no problems.
Based on this information, what is the likely cause of the problem?
Answer: D
Explanation:
The likely cause of the problem is that the external hard drive is USB 3.0 and is causing a significant increase in the noise floor when in use. USB 3.0 devices are known to generate radio frequency interference (RFI) in the 2.4 GHz band due to their high data transfer rates and harmonics. This RFI can increase the noise floor and degrade the signal-to-noise ratio (SNR) of WLAN devices operating in the same band. This can result in lower data rates, reduced throughput, increased retransmissions, and poor performance. The problem may not occur outside of business hours or on the user's home network because of different usage patterns or environmental factors. References: [CWNP Certified Wireless Network Administrator Official StudyGuide:
ExamCWNA-109], page 527; [CWNA: Certified Wireless Network Administrator Official Study Guide:
ExamCWNA-109], page 497.
NEW QUESTION # 128
You are attempting to locate the cause of a performance problem in two WLAN cells in a mostly overlapping coverage area. You note that one AP is on channel 1 and the other is on channel 2.
When you document your findings, what term do you use to describe the problem in this configuration?
Answer: C
Explanation:
In this scenario, you have two access points (APs) on channels 1 and 2, which are adjacent channels. This configuration results in Adjacent Channel Interference (ACI) because adjacent channels (e.g., 1 and 2) cause interference when used in the same or overlapping coverage areas.
NEW QUESTION # 129
Three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. Assuming no other APs are in the vicinity, is CCI still a possibility in this network and why?
Answer: B
Explanation:
CCI is still a possibility in this network because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP. CCI stands for co-channel interference, which is a type of interference that occurs when two or more devices transmit on the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium, which leads to retransmissions and delays. CCI can be mitigated by increasing physical separation between devices using the same channel or byreducing transmit power levels to limit coverage area. In this scenario, three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. However, this does not prevent CCI from occurring between their client devices that are connected on channel 1. For example, if a client device connected to one of the channel 1 APs sends a frame to another device on the wired network or on another wireless network (such as an Internet server or a VoIP phone), that frame will be heard by both channel 1 APs as well as any other client devices connected to either of them on channel 1. This will cause CCI because these devices will have to wait for the channel to be clear before they can transmit their own frames. The answer that CCI only occurs in the 5 GHz frequency band is incorrect; CCI can occur in any frequency band where devices use the same channel. The answer that channel 11 loops around and causes CCI with channel 1 is also incorrect; channel 11 does not loop around and it operates in a different frequency band than channel 1. References: CWNA-109 Study Guide, Chapter 5:
Radio Frequency Signal and Antenna Concepts, page 147
NEW QUESTION # 130
What is the maximum channel bandwidth supported by the 802.11ac amendment operating in the
5 GHz band?
Answer: C
Explanation:
The 802.11ac amendment supports channel bonding up to 160 MHz in the 5 GHz band, in addition to 20 MHz, 40 MHz, and 80 MHz channel widths. While 160 MHz channels can significantly increase theoretical throughput, they also consume a large portion of the available 5 GHz spectrum and can be difficult to implement in real-world deployments due to limited channel availability and increased susceptibility to interference. 320 MHz channel widths were later introduced with 802.11be (Wi-Fi 7) in the 6 GHz band.
NEW QUESTION # 131
......
It is not a time to get scared of taking any difficult certification exam such as CWNA-109. The excellent study guides, practice questions and answers and dumps offered by BraindumpsVCE are your real strength to take the test with confidence and pass it without facing any difficulty. Passing an CWNA-109 exam rewards you in the form of best career opportunities. A profile rich with relevant credentials opens up a number of career slots in major enterprises. BraindumpsVCE's CWNA-109 Questions and answers based study material guarantees you career heights by helping you pass as many exams as you want.
CWNA-109 Valid Test Papers: https://www.braindumpsvce.com/CWNA-109_exam-dumps-torrent.html
BONUS!!! Download part of BraindumpsVCE CWNA-109 dumps for free: https://drive.google.com/open?id=1tge-V6p2zeOJ9_ei6GHh3WLNQJgLEFU-