Study JN0-364 Test - Exam JN0-364 Simulator Online

What's more, part of that Prep4sureGuide JN0-364 dumps now are free: https://drive.google.com/open?id=1R4-amuQEmFSWuJzGRn0ICA6i3VYX6grE

As you can find on the website, there are three versions of JN0-364 study materials that are also very useful for reading: the PDF, Software and APP online. For example, you can use the APP version of JN0-364 real exam in a web-free environment. Of course, the premise is that you have used it once before in a networked environment. This will save you a lot of traffic. This advantage of JN0-364 Study Materials allows you to effectively use all your fragmentation time.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. Static routes
  • 2. IPv6 over IPv4 tunneling
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. Segment routing with MPLS
  • 2. RSVP
  • 3. MPLS terminology
  • 4. End-to-end packet flow and forwarding
  • 5. MPLS packet header
  • 6. LDP
  • 7. Labels and the label information base
  • 8. MPLS and routing tables
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. MPLS forwarding
  • 3. Shortest path segment-routing LSPs
  • 4. RSVP-signaled Label-Switched Paths (LSPs)
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Interfaces and adjacencies
  • 2. Troubleshooting tools
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Adjacencies and neighbors
  • 2. Metrics
  • 3. Link-state database
  • 4. IS-IS protocol data units (PDUs)
  • 5. Designated intermediate system (DIS)
  • 6. Levels and areas
  • 7. Type, length, values (TLVs)
Layer 2 Bridging or VLANs- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Virtual Switches
  • 2. Bridging elements and terminology
  • 3. Frame processing
  • 4. Provider bridging (Q-in-Q tunneling)
  • 5. Service provider switching platforms
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. VLANs
  • 2. IRB
  • 3. Interfaces and ports
  • 4. Provider bridging
Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 3. Load balancing
  • 4. Static, aggregate, and generated routes
  • 5. Martian addresses
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Load balancing
  • 3. Static, aggregate, and generated routes
Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. MSTP
  • 2. VSTP
  • 3. RSTP
  • 4. STP
- Identify the concepts, operation, or functionality of STP
  • 1. MSTP
  • 2. VSTP
  • 3. RSTP
  • 4. STP
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. Route selection process
  • 2. Attributes
  • 3. BGP basic operation
  • 4. IBGP and EBGP functionality and interaction
  • 5. BGP route reflection and confederations
  • 6. BGP message types
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Peers and peer groups
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Adjacencies and neighbors
  • 2. Link-state advertisement (LSA) packet type
  • 3. Designated router and backup designated router
  • 4. Link-state database
  • 5. OSPF area and router types
  • 6. OSPF packet types
  • 7. Router ID
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Interfaces and neighbor

>> Study JN0-364 Test <<

Juniper JN0-364 Desktop & Practice Test Software By Prep4sureGuide

Dear everyone, you can download the JN0-364 free demo for a little try. If you are satisfied with the JN0-364 exam torrent, you can make the order and get the latest JN0-364 study material right now. Our JN0-364 training material comes with 100% money back guarantee to ensure the reliable and convenient shopping experience. The accurate, reliable and updated Juniper JN0-364 study torrent are compiled, checked and verified by our senior experts, which can ensure you 100% pass.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q42-Q47):

NEW QUESTION # 42
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state.
What would cause this behavior?

Answer: D

Explanation:
The Idle state indicates that the BGP process is waiting to initiate a connection but cannot establish a TCP session with the configured peer. If the peer IP address is incorrect, the router attempts to connect to a non-existent or wrong neighbor, preventing the TCP session on port 179 from being established and keeping the BGP session in the Idle state.


NEW QUESTION # 43
Exhibit:

Referring to the exhibit, R1 is advertising prefix 203.0.113.0/24 to R2 over EBGP. R2 is configured to advertise this prefix into IBGP. R3 receives the 203.0.113.0/24 route, however the route is hidden.
Which configuration statement do you need to add to R2 to solve this problem?

Answer: B

Explanation:
In Juniper Networks Junos OS, a "hidden" route in the BGP table typically signifies that the router has received the prefix but cannot install it into the active routing table because theBGP next hop is unreachable
. This is a common occurrence in service provider environments when transitioning betweenExternal BGP (EBGP)andInternal BGP (IBGP).
According to Juniper technical documentation, when an EBGP speaker (R1) advertises a prefix to its peer (R2), it sets the next hop to its own interface IP address ($172.16.10.1$). By default, when R2 re-advertises that prefix to its IBGP peer (R3), itpreserves the original EBGP next-hop address. Unless R3 has a specific route in its Interior Gateway Protocol (IGP) or a static route to reach the $172.16.10.1$ subnet, it will mark the route as unusable (hidden).
In the exhibit, the show route output onR3explicitly shows the nexthop for $203.0.113.0/24$ as
$172.16.10.1$. Since this route is marked "hidden," we can conclude R3 does not know how to reach R2's external peering link. To resolve this, the network administrator must modify the next-hop attribute before the route is sent to R3.
By adding the statementset policy-options policy-statement export-to-ibgp then next-hop self(Option B) on routerR2, R2 will replace the external next-hop ($172.16.10.1$) with its own internal peering address ($172.16.20.1$) before advertising the route to R3. Because R3 already has a direct or IGP connection to R2's internal address, it will successfully resolve the next hop, and the route will transition from "hidden" to
"active."
Option A is unnecessary because the route is already being exported; Option C is redundant as the policy is already applied to the IBGP group; and Option D changes path preference but does not solve the underlying reachability problem.


NEW QUESTION # 44
Click the Exhibit button.

Referring to the exhibit, traffic destined to which network will be sent through the tunnel?

Answer: B

Explanation:
The route for 172.20.110.0/24 shows the next hop as the tunnel interface gr-0/0/0.0. This indicates that traffic destined for that prefix will be forwarded through the tunnel. The other route uses a physical interface (ge-0/0/3.0), meaning it is not sent through the tunnel.


NEW QUESTION # 45
What are two types of BGP messages exchanged while in the Established state? (Choose two.)

Answer: A,D

Explanation:
Update messages are exchanged between BGP peers in the Established state to advertise new routes, withdraw previously advertised routes, and share path attributes for reachable prefixes.
Notification messages are used to signal errors detected in the BGP session and immediately terminate the session when a protocol error occurs.


NEW QUESTION # 46
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?

Answer: D

Explanation:
When establishing an EBGP session, it's necessary to specify both the local AS number and the local address that the session will use. The local address is required for establishing the TCP connection for BGP. The local AS must be specified to identify the autonomous system of the router.


NEW QUESTION # 47
......

Are you ready to gain all these JN0-364 certification benefits? Looking for a simple, smart, and quick way to pass the challenging JN0-364 exam? If your answer is yes then you need to enroll in the JN0-364 exam and prepare well to crack this JN0-364 exam with good scores. In this career advancement journey, you can get help from Prep4sureGuide. The Prep4sureGuide will provide you with real, updated, and error-free Juniper JN0-364 Exam Dumps that will enable you to pass the final JN0-364 exam easily.

Exam JN0-364 Simulator Online: https://www.prep4sureguide.com/JN0-364-prep4sure-exam-guide.html

P.S. Free & New JN0-364 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1R4-amuQEmFSWuJzGRn0ICA6i3VYX6grE