BTW, DOWNLOAD part of Prep4away JN0-352 dumps from Cloud Storage: https://drive.google.com/open?id=1216ktephjvKjTahk8nEZhFiu5QNahQDy
The JN0-352 PDF is the collection of real, valid, and updated Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) practice questions. The Juniper JN0-352 PDF dumps file works with all smart devices. You can use the JN0-352 PDF questions on your tablet, smartphone, or laptop and start JN0-352 Exam Preparation anytime and anywhere. The JN0-352 dumps PDF provides you with everything that you must need in JN0-352 exam preparation and enable you to crack the final JN0-352 exam quickly.
| Section | Objectives |
|---|---|
| Topic 1: Layer 2 Switching Technologies | - VLANs and trunking - Spanning Tree Protocol (STP/RSTP/MSTP) - Ethernet switching concepts |
| Topic 2: Routing Policy and Filtering | - Policy statements - Route filtering and preference control |
| Topic 3: High Availability | - Redundancy concepts in enterprise networks - VRRP configuration and behavior |
| Topic 4: Routing Protocols | - IS-IS overview - OSPF configuration and troubleshooting - BGP fundamentals and policy control |
| Topic 5: Network Services | - Basic multicast concepts - NAT concepts in Junos |
| Topic 6: Operations and Troubleshooting | - Junos CLI monitoring tools - Troubleshooting routing and switching issues |
>> JN0-352 Reliable Braindumps Ebook <<
If you buy online classes, you will need to sit in front of your computer on time at the required time; if you participate in offline counseling, you may need to take an hour or two of a bus to attend class. But if you buy JN0-352 test guide, things will become completely different. Unlike other learning materials on the market, Enterprise Routing and Switching, Specialist (JNCIS-ENT) torrent prep has an APP version. You can download our app on your mobile phone. And then, you can learn anytime, anywhere. Whatever where you are, whatever what time it is, just an electronic device, you can do exercises. With Enterprise Routing and Switching, Specialist (JNCIS-ENT) torrent prep, you no longer have to put down the important tasks at hand in order to get to class; with JN0-352 Exam Questions, you don’t have to give up an appointment for study.
NEW QUESTION # 16
You are troubleshooting an issue where traffic to 192.168.10.0/24 is being sent to R1 instead of your desired path through R2.
Referring to the exhibit, what is the reason for the problem?
Answer: A
Explanation:
The exhibit shows the output of the command show ip bgp, which displays information about the BGP routes in the routing table. The output shows two routes for the destination 192.168.10.0/24, one from R1 and one from R2.
The route from R1 has a local preference of 200, while the route from R2 has a local preference of 100. Local preference is a BGP attribute that indicates the degree of preference for a route within an autonomous system (AS). A higher local preference means a more preferred route.
BGP uses a best path selection algorithm to choose the best route for each destination among multiple paths. The algorithm compares different attributes of the routes in a specific order of precedence. The first attribute that is compared is weight, which is a Cisco-specific attribute that is local to the router. If the weight is equal or not set, the next attribute that is compared is local preference.
In this case, both routes have the same weight of 0, which means that they are learned from external BGP (eBGP) peers. Therefore, the next attribute that is compared is local preference.
Since R1's route has a higher local preference than R2's route, it is chosen as the best path and installed in the routing table. The other attributes, such as origin code and AS path, are not considered in this case.
NEW QUESTION # 17
You are verifying a new BGP peering session with an ISP. You issue the show bgp summary command, but the output shows the peer in the Active state. Which statement is correct in this scenario?
Answer: D
Explanation:
The BGP finite state machine defined in RFC 4271 progresses through Idle, Connect, Active, OpenSent, OpenConfirm, and finally Established. The Active state is entered either directly after Idle, when the local router begins retrying a TCP connection setup toward the configured peer, or after a previous Connect attempt has failed and the ConnectRetry timer has expired, prompting the router to keep trying to complete the underlying TCP three-way handshake. Seeing a peer parked in Active therefore means the local device has a fully valid neighbor configuration and is persistently attempting to reach the remote address on TCP port 179, but the handshake is not succeeding -- common root causes include a firewall or ACL blocking TCP 179 between the two endpoints, an unreachable or incorrect peer IP address, the remote BGP process not running or not listening, or an asymmetric routing path preventing the SYN/ACK from returning. It does not indicate a misconfiguration on the local box in the sense of a missing statement (that would typically leave the session as Idle), nor does it indicate an established, functioning session exchanging UPDATE messages (that state is Established), and it is not a deliberately idle/disabled condition, which Junos reports plainly as Idle. Recognizing Active as 'trying to connect' rather than 'connected' is essential for correct BGP troubleshooting sequencing.
NEW QUESTION # 18
You want to configure a floating static route.
What must be configured in this scenario?
Answer: D
Explanation:
A floating static route is a backup static route that remains present in the configuration but stays inactive in the routing table under normal conditions, only becoming active if the primary, preferred route to the same destination is withdrawn or otherwise becomes unavailable. Junos determines which of several competing routes to the same prefix becomes active strictly by comparing each route's preference value (administrative distance), with the numerically lowest preference always winning; every routing protocol and static routes themselves carry a default preference (5 for standard static routes), and this value can be explicitly overridden per route using the preference statement under the static route's configuration. To create a floating static route, the administrator deliberately configures a preference value higher (that is, numerically worse, less preferred) than the preference of the primary route it is meant to back up - for example, a value higher than the 5 default of an ordinary static route, or higher than a dynamic protocol's preference such as OSPF's 10 - ensuring the floating route only becomes active once the more-preferred primary route disappears from the table entirely. This preference-based mechanism is the essential, defining configuration element of a floating static route. Priority is not a valid Junos static-route statement, next-hop simply defines where matching traffic is forwarded without controlling route selection behavior, and qualified-next-hop is a related but distinct mechanism used to assign a per-next-hop preference within a single multi-next-hop static route statement rather than between the standalone static route and its dynamic counterpart. Reference topics: Junos Enterprise Routing - Protocol Independent Routing, Configuring Floating Static Routes with Preference.
NEW QUESTION # 19
How would you view the metric assigned to a route in OSPF? (Choose two.)
Answer: A,B
Explanation:
The metric that OSPF assigns to a destination is visible from two complementary vantage points in Junos. The show route protocol ospf command displays the main routing table filtered to OSPF-learned prefixes, and each entry shows the computed cost alongside the next hop, exactly as it was installed after SPF calculation. The show ospf route command (which accepts filters such as intra- area, inter-area, and extern) presents the OSPF-specific routing table, organized by route type, and explicitly lists the metric column for every intra-area, inter-area, and external route the local router has calculated. Together these two commands give both the RIB-level and the protocol-level view of route cost. By contrast, show ospf database extensive dumps the raw link-state advertisements, where metrics appear only as link-level values buried inside Router or Network LSAs rather than as a resolved route cost, so it is not the direct tool for viewing a route's metric. show ospf interface reports interface operational state, area, and DR/BDR information but does not present a cost or metric field at all in its standard output. Candidates should be comfortable distinguishing the RIB- oriented and protocol-table-oriented verification commands, since JNCIS-ENT scenarios frequently test whether a candidate reaches for the correct show command layer during troubleshooting.
NEW QUESTION # 20
An EBGP session sources its TCP connection from which IP address?
Answer: B
NEW QUESTION # 21
......
Prep4away have the obligation to ensure your comfortable learning if you have spent money on our JN0-352 study materials. We do not have hot lines. The pass rate of our JN0-352 is as high as more then 98%. And you can enjoy our considerable service on JN0-352 exam questions. So you are advised to send your emails to our email address. In case you send it to others' email inbox, please check the address carefully before. The after-sales service of website can stand the test of practice. Once you trust our JN0-352 Exam Torrent, you also can enjoy such good service.
Reliable JN0-352 Dumps Pdf: https://www.prep4away.com/Juniper-certification/braindumps.JN0-352.ete.file.html
BONUS!!! Download part of Prep4away JN0-352 dumps for free: https://drive.google.com/open?id=1216ktephjvKjTahk8nEZhFiu5QNahQDy