P.S. Free & New VNX301 dumps are available on Google Drive shared by Pass4guide: https://drive.google.com/open?id=1awwIU7gdxge8rdDSmgdBEwzHT8TM1eva
Long time learning might makes your attention wondering but our effective VNX301 study materials help you learn more in limited time with concentrated mind. Just visualize the feeling of achieving success by using our VNX301 exam guide,so you can easily understand the importance of choosing a high quality and accuracy VNX301 training engine. You will have handsome salary get higher chance of winning and separate the average from a long distance and so on.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist |
| Exam Number: | VNX301 |
| Certificate Validity Period: | 2 years |
| Real Exam Qty: | 60 |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Available Languages: | English |
| Passing Score: | Not officially published |
| Exam Duration: | 90 minutes |
| Exam Format: | Multiple Select, Multiple Choice |
| Exam Price: | $150 USD |
| Recommended Training: | Versa Secure SD-WAN Configuration and Administration Versa Advanced Services Training |
| Exam Registration: | Versa Academy Certification Page Kryterion Testing Services |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or onsite testing center via Kryterion |
| Pre Condition: | Must hold Versa Certified SD-WAN Associate (VNX100); 1+ year hands-on experience recommended |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300 |
>> Valid Braindumps VNX301 Questions <<
Full refund is available if you fail to pass the exam in your first attempt after buying VNX301 exam bootcamp from us, and we will refund your money, In addition, VNX301 exam dumps contain both questions and answers, and it’s convenient for you to check the answers after practicing. VNX301 exam botcamp cover most of the knowledge points of the exam, and you can master the major knowledge points as well as improve your professional ability in the process of training. We have online and offline chat service for VNX301 Exam Dumps, and if you have any questions, you can consult us.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 25
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: A
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 26
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 27
A branch user reports poor throughput over an SD-WAN tunnel. The command show interfaces detail vni-0/0 shows the interface is operating at half-duplex / 100 Mbps , although the circuit is expected to run at 1 Gbps full duplex. What is the most likely cause?
Answer: C
Explanation:
The correct answer is C . Versa's bandwidth and throughput troubleshooting documentation specifically instructs administrators to check link speed and half-duplex conditions with the command show interfaces detail interface-name. The example output shows an interface operating at half-duplex / 100 Mbps , and the documentation states that the interface should not be in half-duplex mode and that 100 Mbps was incorrect in that scenario.
A duplex mismatch or incorrect negotiated speed can severely reduce effective throughput, cause collisions or retransmissions, and make SD-WAN overlay performance appear poor even when the overlay itself is functioning. Versa recommends fixing half-duplex and link-speed issues by correcting the configuration on the device to which the VOS device is connected and checking the ISP-side transmission mode, such as auto
/auto.
SLA probing, Controller route advertisement, and VXLAN encapsulation may affect SD-WAN path selection or tunnel formation, but the evidence in the question directly points to a physical or underlay Ethernet negotiation problem.
NEW QUESTION # 28
You are troubleshooting a branch that cannot form SD-WAN overlay tunnels. The branch has WAN interfaces up, but you suspect remote endpoint objects were not learned. Which VSM command should you use to verify whether remote site objects were learned from BGP or from configuration?
Answer: A
Explanation:
The correct answer is A . Versa data-path troubleshooting documentation gives a specific VSM control-plane workflow for checking SD-WAN tunnel objects. After connecting to the VSM daemon, administrators can use show vsm p2mp local-tunnel-sites 0 to inspect local site objects. To check whether remote site objects were learned from BGP or from configuration , Versa instructs administrators to issue show vsm p2mp tunnel-remote-endpoint tenant < tenant-id > on the VSM control plane.
This command is highly relevant when local WAN interfaces are operational, but overlay tunnel formation is incomplete. It shows remote endpoints such as Controllers, hubs, or branches, along with site type, site name, branch ID, tenant ID, remote WAN link information, and tunnel state-related fields.
show interfaces brief confirms interface state and IP addresses, but it does not show learned remote SD- WAN endpoint objects. CGNAT summary is unrelated to tunnel endpoint learning. System storage is useful for disk checks, but not for SD-WAN overlay endpoint troubleshooting.
NEW QUESTION # 29
A branch device has completed Stage 3 onboarding. Which set of tunnels or sessions should exist after the device becomes fully operational in the customer SD-WAN network?
Answer: C
Explanation:
The correct answer is A . In Versa Secure SD-WAN onboarding, the branch moves through three staging phases before becoming fully operational. Versa documentation states that in Stage 3 , Versa Director pushes the stage-three configuration to the branch device over the IKE session and reboots the branch. After this stage, the branch becomes fully operational and is part of the customer SD-WAN network. At this point, IKE and IPsec sessions are created between the branch and Controller , and VXLAN and ESP sessions are created between branch to branch .
This distinction is important because the Controller connection is used for SD-WAN control-plane functions, while branch-to-branch overlay communication uses tunnel encapsulation for data forwarding. The documentation also notes that branch-to-branch ESP is maintained using a lightweight DH key-pair proprietary protocol.
Options B, C, and D are incorrect. HTTPS to Director alone does not represent the complete SD-WAN operational tunnel state. BGP to Analytics is not the required operational tunnel set. GRE-only tunnels without IPsec do not match the Versa Stage 3 SD-WAN tunnel behavior described in the staging documentation.
NEW QUESTION # 30
......
VNX301 Practice Test Engine: https://www.pass4guide.com/VNX301-exam-guide-torrent.html
BONUS!!! Download part of Pass4guide VNX301 dumps for free: https://drive.google.com/open?id=1awwIU7gdxge8rdDSmgdBEwzHT8TM1eva