Free PDF Quiz Professional JN0-364 - Service Provider Routing and Switching, Specialist (JNCIS-SP) New Learning Materials

P.S. Free & New JN0-364 dumps are available on Google Drive shared by ITexamReview: https://drive.google.com/open?id=12z97IjWyodHl3PdcvFMc4IcztGHL6Gsq

Our JN0-364 exam torrent is available in different versions. Whether you like to study on a computer or enjoy reading paper materials, our test prep can meet your needs. Our PDF version of the JN0-364 quiz guide is available for customers to print. You can print it out, so you can practice it repeatedly conveniently. And our JN0-364 exam torrent make it easy for you to take notes on it so that your free time can be well utilized and you can often consolidate your knowledge. Everything you do will help you successfully pass the exam and get the card. The version of APP and PC of our JN0-364 Exam Torrent is also popular. They can simulate real operation of test environment and users can test JN0-364 test prep in mock exam in limited time. They are very practical and they have online error correction and other functions. The characteristic that three versions of JN0-364 exam torrent all have is that they have no limit of the number of users, so you don’t encounter failures anytime you want to learn our JN0-364 quiz guide. The three different versions can help customers solve any questions and meet their all needs.

Juniper JN0-364 Exam Syllabus Topics:

Section	Weight	Objectives
Protocol-Independent Routing	10-15%	- Load balancing - Routing instances and RIB groups - Martian addresses - Static, aggregate, and generated routes - Filter-based forwarding
Intermediate System to Intermediate System (IS-IS)	10-15%	- Metrics and wide metrics - PDUs and TLVs - Adjacencies and levels - Configuration and monitoring
IPv6	8-12%	- Autoconfiguration - Address types and format - Static and dynamic routing - OSPFv3 and BGP for IPv6
Tunnels	5-8%	- Tunnel configuration and usage - GRE and IP-IP tunnels
High Availability	5-8%	- Nonstop active routing - Graceful restart - NSR and GRES concepts
Layer 2 Bridging and VLANs	8-12%	- Service provider switching features - Bridging concepts - VLANs and trunking
Spanning Tree Protocols	8-12%	- Port roles and states - Configuration and convergence - BPDU and protection features - STP, RSTP, MSTP, VSTP
Border Gateway Protocol (BGP)	20-25%	- IBGP and EBGP - Configuration and troubleshooting - Basic operation and message types - Policy and route filtering - Path selection and attributes
Multiprotocol Label Switching (MPLS)	12-18%	- Terminology and forwarding - LDP and RSVP - Labels and LIB - Configuration and monitoring - Segment routing basics
Open Shortest Path First (OSPF)	15-20%	- LSA types and operation - Link-state database - Areas and router types - Configuration and troubleshooting

>> JN0-364 New Learning Materials <<

Authoritative JN0-364 New Learning Materials, Ensure to pass the JN0-364 Exam

Our website just believe in offering cost-efficient and time-saving JN0-364 exam braindumps to our customers that help them get high passing score easier. Our valid JN0-364 test questions can be instantly downloaded and easy to understand with our 100% correct exam answers. One-year free update right will enable you get the latest JN0-364 VCE Dumps anytime and you just need to check your mailbox.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q19-Q24):

NEW QUESTION # 19
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?

A. The Junos OS will use the IP address assigned to the loopback interface for the router ID.
B. The Junos OS will use the IP address assigned to the interface with the lowest MAC address.
C. The Junos OS will use the IP address assigned to the Interface with the highest priority.
D. A router ID will not be assigned until it is manually configured.

Answer: A

Explanation:
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated. The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface. Otherwise, the first hardware interface with an IP address is used In OSPF, if a router ID is not manually configured, Junos OS will automatically select the router ID based on the highest IP address of any of the router's loopback interfaces. If no loopback interface exists, the highest IP address of any active interface will be used. Therefore, answer C is correct.

NEW QUESTION # 20
You are the administrator for two Junos routers called R1 and R2. These two routers are directly connected to each other. These two routers run IS-IS and BFD. R1 is configured to send BFD packets every 300 milliseconds. R2 is configured to send BFD packets every 400 milliseconds.
In this situation, what is the expected outcome?

A. Each router will negotiate to send BFD packets at the slowest of the two rates.
B. BFD will fail due to the mismatched timers.
C. Each router will negotiate to send BFD packets at the fastest of the two rates.
D. Each router will send BFD packets at the rate that has been locally configured.

Answer: A

Explanation:
With BFD, each side advertises its desired transmit interval, but the session uses an effective transmit/receive behavior that must be acceptable to both ends. The receiving side controls how fast it is willing to be polled by advertising its required minimum receive interval, which results in the effective rate converging to the slower (larger interval) value so that neither router is forced to receive BFD control packets faster than it supports.

NEW QUESTION # 21
How are routing loops prevented in internal BGP networks?

A. External BGP routes are never readvertised to other external BGP neighbors.
B. External BGP routes are never readvertised to other internal BGP neighbors.
C. Internal BGP routes are never readvertised to other external BGP neighbors.
D. Internal BGP routes are never readvertised to other internal BGP neighbors.

Answer: D

Explanation:
In iBGP, routes learned from one internal BGP neighbor are not advertised to other internal BGP neighbors. This rule prevents routing loops within the autonomous system and is the reason a full mesh or route reflection is required for proper route propagation in iBGP networks.

NEW QUESTION # 22
Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)

A. By default, the next-hop value is not changed across EBGP links.
B. By default, the next-hop value is changed across EBGP links.
C. By default, the next-hop value is not changed across IBGP links.
D. By default, the next-hop value is changed across IBGP links.

Answer: B,C

Explanation:
By default, the router that originally sourced the route into BGP places its peer address into the attribute field. The next-hop value is then typically changed when the route is transmitted across external gGP (EBGP) links. Internal BGP (IBGP) peers do not alter the next-hop value between themselves.

NEW QUESTION # 23
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state.
What would cause this behavior?

A. The BGP group type is set to internal instead of external.
B. The local AS number is missing.
C. The BGP hold time is too short.
D. The peer IP address is incorrect.

Answer: D

Explanation:
The Idle state indicates that the BGP process is waiting to initiate a connection but cannot establish a TCP session with the configured peer. If the peer IP address is incorrect, the router attempts to connect to a non-existent or wrong neighbor, preventing the TCP session on port 179 from being established and keeping the BGP session in the Idle state.

NEW QUESTION # 24
......

Customers can start using the Juniper JN0-364 Exam Questions instantly just after purchasing it from our website for the preparation of the JN0-364 certification exam. They can also evaluate the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice test material before buying with a free demo. The users will receive updates 365 days after purchasing. And they will also get a 24/7 support system to help them anytime if they got stuck somewhere or face any issues while preparing for the JN0-364 Exam.

Accurate JN0-364 Study Material: https://www.itexamreview.com/JN0-364-exam-dumps.html

P.S. Free & New JN0-364 dumps are available on Google Drive shared by ITexamReview: https://drive.google.com/open?id=12z97IjWyodHl3PdcvFMc4IcztGHL6Gsq