DOWNLOAD the newest CertkingdomPDF JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1dx6Hrd6POZvtm8gWD6s8TeNDBQBwSJNH
After a series of investigations and studies, we found that those students who wish to pass the JN0-364 exam through their own in-depth study of the textbooks are often slack in their learning. Some students may even feel headaches when they read the content that difficult to understand in the textbooks. Our JN0-364 Study Materials are excellent examination review products composed by senior industry experts that focuses on researching the mock examination products which simulate the real JN0-364 test environment. And you will be more confident to pass the JN0-364 exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
| Topic 2: IPv6 | 8-12% | - Static and dynamic routing - OSPFv3 and BGP for IPv6 - Autoconfiguration - Address types and format |
| Topic 3: Multiprotocol Label Switching (MPLS) | 12-18% | - Segment routing basics - LDP and RSVP - Configuration and monitoring - Terminology and forwarding - Labels and LIB |
| Topic 4: Layer 2 Bridging and VLANs | 8-12% | - Bridging concepts - Service provider switching features - VLANs and trunking |
| Topic 5: Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - Configuration and troubleshooting - Path selection and attributes - IBGP and EBGP - Basic operation and message types |
| Topic 6: Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Topic 7: Intermediate System to Intermediate System (IS-IS) | 10-15% | - Adjacencies and levels - Configuration and monitoring - PDUs and TLVs - Metrics and wide metrics |
| Topic 8: Spanning Tree Protocols | 8-12% | - Port roles and states - BPDU and protection features - STP, RSTP, MSTP, VSTP - Configuration and convergence |
| Topic 9: Open Shortest Path First (OSPF) | 15-20% | - Link-state database - Configuration and troubleshooting - LSA types and operation - Areas and router types |
| Topic 10: Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Martian addresses - Filter-based forwarding - Routing instances and RIB groups - Load balancing |
>> Certification JN0-364 Exam Cost <<
Just as an old saying goes, it is better to gain a skill than to be rich. Contemporarily, competence far outweighs family backgrounds and academic degrees. One of the significant factors to judge whether one is competent or not is his or her certificates. JN0-364 real test) Generally speaking, certificates function as the fundamental requirement when a company needs to increase manpower in its start-up stage. In this respect, our JN0-364 practice materials can satisfy your demands if you are now in preparation for a certificate.
NEW QUESTION # 30
Referring to the exhibit. You confirm that the R2 and R3 routers are receiving a BGP route to the
203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
Answer: A,B
Explanation:
A route being hidden in BGP usually indicates a configuration that prevents it from being used, such as a next-hop that is not reachable.
B). Configuring a routing policy on R1 that sets the next-hop to the address used for IBGP peering ensures reachability of the next-hop within the local AS. D. Applying the correct routing policy as an export policy to the IBGP group on R1 will share the route with the IBGP peers, in this case, R2 and R3.
NEW QUESTION # 31
Which two statements are correct when using LDP? (Choose two.)
Answer: B,D
Explanation:
With Label Distribution Protocol (LDP), a full mesh of label-switched paths (LSPs) is automatically created between all LDP-enabled routers, and these paths are reflected in the inet.3 table. LDP LSPs are set up when LDP is enabled on interfaces connecting routers in an MPLS network.
NEW QUESTION # 32
Exhibit:
You have configured IPv4 and IPv6 in your network and all OSPF neighbors are established. You apply the configuration shown in the exhibit. Which statement is true in this scenario?
Answer: A
Explanation:
In a Juniper Networks environment running Junos OS, understanding the interaction between different versions of OSPF is essential for multi-protocol environments.OSPFv2(defined in RFC 2328) is the standard protocol used for routing IPv4 unicast traffic.OSPFv3(defined in RFC 5340) was originally developed to support IPv6 routing. However, OSPFv3 was later extended via RFC 5838 to support multiple address families (AF), allowing it to carry IPv4 unicast, IPv4 multicast, and other address types within a single OSPF instance.
According to Juniper technical documentation, Junos OS implements this multi-AF support in OSPFv3 through the use ofrealms. When the realm ipv4-unicast statement is configured under the [edit protocols ospf3] hierarchy, the OSPFv3 process becomes capable of calculating and advertising IPv4 routes.
In the provided exhibit, routerR2has a dual-protocol configuration. First, it is running standard OSPFv2, with the ge-0/0/1.0 interface (which is directly connected to the 172.16.2.0/24 network) participating in Area 0.
This ensures that the prefix is advertised as a standard IPv4 LSA to its neighbor,R1. Second, R2 is running OSPFv3 with the realm ipv4-unicast specifically enabled on that same ge-0/0/1.0 interface. Because of this realm, OSPFv3 also treats the 172.16.2.0/24 prefix as a reachable IPv4 destination and advertises it to R1 as an OSPFv3 IPv4-unicast LSA.
As a result, whenR1(which is also running both protocols) receives these routing updates, it will see the same destination prefix advertised by two different protocols. Its routing table (inet.0) will contain one entry learned from the OSPFv2 process and a second, separate entry learned from the OSPFv3 process. While the Junos Routing Engine will ultimately select one as the "active" route based on route preference (both protocols have a default preference of 10), both entries will technically exist within the Routing Information Base (RIB). This confirms that statementBis the correct description of the operational state of the network.
=========
NEW QUESTION # 33
What information is determined by using the AS path attribute included in the BGP update message? (Choose two.)
Answer: A,D
Explanation:
The AS path attribute lists the autonomous systems that a route advertisement has traversed.
Routers use this attribute to detect routing loops by checking if their own AS number appears in the path.
The AS path length is also used in the BGP best-path selection process, where routes with shorter AS paths are preferred because they represent fewer AS hops to reach the destination prefix.
NEW QUESTION # 34
For two or more switches to participate in the same MSTP region, which parameter must match?
Answer: A
Explanation:
Multiple Spanning Tree Protocol (MSTP), as defined in IEEE 802.1s and implemented in Juniper Networks Junos OS, allows for the grouping of VLANs into specific spanning tree instances. This provides significant scalability and load-balancing advantages over traditional STP or RSTP. To achieve this, switches must be grouped into logical "Regions." According to Juniper documentation, for two or more switches to be considered part of the sameMSTP Region, they must possess an identicalMSTP Configuration Identifier. This identifier consists of three specific attributes that must match exactly across all participating switches:
* MSTI Name (Region Name):A descriptive string (up to 32 characters) that identifies the region.
* MSTI Revision Level:A numerical value (0-65535) used to track configuration changes.
* VLAN-to-Instance Mapping:The specific table that defines which VLAN IDs are associated with which Multiple Spanning Tree Instances (MSTIs).
If even one of these parameters-such as theRegion name(Option A)-differs, the switches will treat each other as being in separate regions. When switches are in different regions, they interact using theCommon Spanning Tree (CST), effectively seeing the other region as a single "virtual bridge," which limits the granularity of traffic engineering.
TheExtended system ID(Option B) is a component of the Bridge ID used to carry VLAN information in PVST+ but is not a region-matching requirement.Root bridge priority(Option C) andRoot bridge ID(Option D) are variables used during the STP election process to determine the topology's root, but they do not define the boundaries of an MSTP region itself.
NEW QUESTION # 35
......
Our company is a professional certificate exam materials provider. We have occupied in the field for years, therefore we have rich experiences. JN0-364 learning materials of us are high-quality, and we receive many good feedbacks from our customers, and they think highly of the JN0-364 Exam Dumps. In order to serve you better, we have online and offline chat service, you can ask any questions about the JN0-364 learning materials. Besides, we provide you with free update for one year after purchasing.
Certification JN0-364 Test Answers: https://www.certkingdompdf.com/JN0-364-latest-certkingdom-dumps.html
BTW, DOWNLOAD part of CertkingdomPDF JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1dx6Hrd6POZvtm8gWD6s8TeNDBQBwSJNH